Xalindor
Member-
Posts
24 -
Joined
-
Last visited
Awards
This user doesn't have any awards
Recent Profile Visitors
374 profile views
Xalindor's Achievements
-
None. I just found this actually. So now I have it turned on. Feels bad man. =/
-
Was wondering about this ram. I installed it when I built my computer 2 years ago and I was looking into checking speeds on various things. I noticed that my memory freq js sitting at 2197 with this ram. Seems like it may be running a little low? Thoughts. This is under 0 load just sitting on bios Corsair Vengeance LPX 16GB (2x8GB) DDR4 DRAM 2666MHz (PC4 21300) C16 Desktop Memory Kit - Black (CMK16GX4M2A2666C16 https://www.amazon.com/Corsair-Vengeance-2666MHz-Desktop-Memory/dp/B0123ZC44Y/ref=redir_mobile_desktop?_encoding=UTF8&psc=1&ref=yo_pop_d_pd_title
-
Low test results on M.2 960 EVO w/ slow boot times
Xalindor replied to Xalindor's topic in Storage Devices
Ahh I got ya. Thx for pointing that out. -
Low test results on M.2 960 EVO w/ slow boot times
Xalindor replied to Xalindor's topic in Storage Devices
@iiNNeXnope I went through all of those options since it wasn't there. M. 2 isn't listed in any of the sub menus under the advanced tab. Checked them all just to be sure. I know that on my board the M. 2 uses 2 of the Sata connections bus instead of a pcie ( from the manual) so it might be a rabbit trail. O ly thing remotely close I found was this one. Sorry for crummy pics. Wife asleep behind me lights off -
Low test results on M.2 960 EVO w/ slow boot times
Xalindor replied to Xalindor's topic in Storage Devices
@iiNNeX there may be something to this. I went into bios and I don't see the option you are referring too.but where it lists all my data connections the 960 isn't there even tho it technically occupies slot one and 2. One and 2 show this. Or am I looking at the wrong thing. -
I just purchased a 500G Samsung 960 evo to give me extra storage on my old 256G Samsung 840 EVO. The problem is i feel like I'm getting slow read and right times on some sections than i should be. It could even be something i did wrong in the setup, tho i can not figure out what it was. I did a Fresh install no cloning here (tho starting to wish I did. seems like many games are running worse and my boot time is SLOWER than it was when i had windows 10 installed on the 840. these are my results Samsung Magician and on CrystalDisk. This website shows i should be getting Random IOPS in the 360k+ range. yet im getting just barely over half that. and can not for the life of me figure out why the boot time is lower. ( yes i have moved the boot priority to the 960 evo which is where windows is installed.) steps I have tried are below ASUS Maximus Hero VIII Intel 6700k cooled with H100i closed loop cooler EVGA 980TI Hybrid 16G ram Corsair Vengance 6 Corsair ML 120 Fans Steps Taken. 1. set proper boot priority 960 evo number 1 (with windows installed) 2. set the delay after post to 0 seconds was 3 3. installed Samsung magician and used optimize drive option 4. Updated BIOS on motherboard to version 3703 5. Pulled all hair out from roots 6.
-
it's fine the card is over a year old anyway
-
yea I'm thinking the same thing (mainly cause im tired of screwing with it). do you think it would be ok to trim the plastic around the shroud or should i get the adapter previously mentioned. i can only find them in a 4 pack and only need one Correction I found 1 for $7 or 4 for $8. thoughts?
-
@woodenmarker i was actually just trying that. i switched all the fans to standard. GPU went from 24C to 27C then I started mining to jack up the heat and it went up to 60C with no change to fan speed.
-
https://www.newegg.com/Product/Product.aspx?Item=N82E16813132565&ignorebbr=1&nm_mc=AFC-C8Junction&cm_mmc=AFC-C8Junction-PCPartPicker, LLC-_-na-_-na-_-na&cm_sp=&AID=10446076&PID=3938566&SID= Yes The rest of my build
-
@WoodenMarker My temp is between 24C and 26C
-
-
@WoodenMarker This is the main page. i have the CHA_1 fan set at 100% in bios it is the SyS fan sitting at 2500 RPM (positive of that) I then set the speeds like this. the rest are all default 0 min 100 max not variated Took a wild guess here...this might be where the problem is but idk. does this look right to you?
-
I did. I'm positive i had the right fan. i was worried about damaging the fan doing that too lol but yea i did. i didnt stop it i dropped the speed way down but it changed on speedfan from 2500 RPM to about 1200 and when i let go it sped back up
-
@WoodenMarker Good to know about damage on the fan. the video i was watching ( I edited it in probably after you posted) is below. I watched the whole video but this link will start you where i was following along. I set it to adjust at 55c ( never changed it to F as it says to do in vid) to 100% speed and i got no change. thinking i may have the wrong fan i adjusted all fans to go to 100% speed at 55c on vid card. started mining corsair link said card got up to 62c with no change in fan speed.