Jump to content

joeydutchman

Member
  • Posts

    75
  • Joined

  • Last visited

Everything posted by joeydutchman

  1. I cant move the power supply because it is stuck to the csse and it doesnt have a 4pin connector for some reason. I might just be blind. my GPU doesnt show up in the device manager. I installed the drivers anyway and then the lights on the gpu turned off again I think my gpu is just dead
  2. Sadly I can’t use my 1070 in another system because the power supply doesn’t have the connector available
  3. Hi, I just tried that and it works. Lights on the 1070 stay on and I dont see the redlight on the motherboard. I plugged my second monitor into my gpu but I just get a black screen.
  4. Hello, Last week I was playing a game and my pc shutdown. When I tried to boot it again I kept getting a black screen. I opened up my pc and I can see a Red light on my motherboard. I switched out my 1070 for a 1060 and it boots fine. I tried switching slots but it did not work. My lights turn on / fans start spinning but after a couple seconds my lights turn off and the motherboard red light turns on. Does this mean my 1070 is dead? specs: CPU: i7 9700K GPU: EVGA GTX 1070 Superclocked RAM: 16GB DDR4 Corsair (cant exactly remember) Motherboard: Asrock 4S phantom gaming PSU: Corsair VS650
  5. Thanks for the replies. I'll just keep it as it is if there won't be much improvement
  6. @Dackzy Sadly I can not find a place in the Netherlands where I can buy the monoprice desktop amplifier. If I use the Magni 2 Amp will it have better sound than the xonar dgx?
  7. Hello, Recently I have bought the DT 990 pro 250ohm. I have been using them with my soundcard for a while (Xonar dxg) but I feel like the sound is not as good as is should be so I started looking around for amps. I ended up with 2 amps: Fiio E10k and the Shiit Magni 2. Since these amps are around 90/100$ I would like to know if it is worth upgrading from my xonar dgx. Any help is appreciated.
  8. I reset it again but it still has the orange tint
  9. Without the cable connected to my pc the monitor OSD settings still has the orange tint. I cant test on my laptop because HDMI doesnt work and my laptop doenst have DP input.
  10. I tried all the presets but they all have the orange tint on it. I cant find an option to change display color settings. I'll try it on a different pc now. I will reply with the result
  11. Windows night light is disabled. I cant find an option for blue light filter on the monitors OSD either
  12. Hi, I have bought a new monitor (dell s2417dg) and it works fine but the screen has an orange tint to it. If i put something white on my monitor it turns orange-ish The picture below shows my new monitor on the left and my old one on the right. I cant find a way to fix it. Thanks for any help!
  13. Hi, I have been looking for a new monitor lately because I notice screen tearing. Currently I am using a 1080p 144hz monitor with a Gtx 1070. G-Sync looks like the best option for me. I found these two monitors: AOC G2460PG ASUS ROG Swift PG248Q What really is the difference between these two monitors other than the 100$ difference. Any other suggestions are also appreciated. Thanks
  14. I will try it tomorrow with a different pc. Thanks for your reply!
  15. Hi, Recently I received my new headset the Sennheiser PC37x from Massdrop. So far I have been very happy with the headset and the quality is good but when I save a recording I can hear noise from my microphone in my recording and it is really frustrating (Link to video). I tried it without a microphone and the noise is not there. It does not matter if I put in in the front or rear. I have also reinstalled realtek drivers but that only made the noise sound different. I have been looking at sound cards as I think it might fix the noise and I ended up with the Asus Xonar series. I think a DAC might also fix the issue but most DAC's are too expensive for me. My budget is around ~$65 My question is: Will a sound card/DAC fix my issue or do I need to send the headset back. I'm open to any other recommendations! Thank you for reading.
  16. joeydutchman

    New headset

    Hi, Yesterday I saw a good offer on massdrop for a Sennheiser PC37x. Link I currently have the HyperX Cloud II. Would it be worth it upgrading to the Sennheiser from my cloud 2? Any help is appreciated.
  17. Hello, My friend has been looking around for a good CPU that he can use for gaming. He plays battlefield, Rust, Payday. He plays games at 1080p @ 60hz Currently, he has an AMD Radeon HD 5870 graphics card and Intel Core2 Quad CPU q6600 @ 2.4ghz. The motherboard is an MSI (Can't find anymore information about it) Almost all of the games he plays he plays it with low fps and he would like to play with some higher fps. I have been trying to help him search for a better CPU/Case so he can play games without playing with ~ 30 fps But I'm not very good at finding the good parts. Budget is around ~150$. He plans on spending it on a better CPU with cooling or a better case with more airflow and a better CPU cooler because his PC keeps overheating and crashing lately. Any help is appreciated.
  18. You should check out the HyperX Cloud 2's I have them and dont have any issues and would recommend them to anyone looking for a good pair. However theres not a mute button on the mic but on the usb dongle
  19. I tested the CPU on a different mobo and everything worked complety fine. There's no point of sending a picture of the motherboard and the pins because I know it's broken. I'm getting a new motherboard on Monday. Thank you to everyone who replied
  20. The pc starts and all the fans are spinning. I can see the asrock logo and the loading dots of windows 10. After a couple seconds the loading dots freeze, I get a black screen and it says: "no signal found" does this mean my motherboard is broken or my CPU
  21. I tried as much as I could by straightning the pins. I broke 3 of them and it still looks like it's broken but I got the pc to boot up but i had no monitor plugged in so I could not tell if it worked. I shut down the pc immediately after 10 seconds because I did not want to break the cpu because I did not have a cooler placed on. Will it break my cpu if I use it even if 3 pins are broken? Thanks
  22. You were right I'm going to try to get the pins straight up and try to use my other mother board. I will update this post when I have done this.
  23. I also found out that I forgot to plug in the cable for the cpu. I'm going to try it again and if that does not wor I will try to straighten the pins as @Litargirio suggested
  24. The pins are bend over so I will try it with an old motherboard that was inside a pre-built pc. This motherboard does not have a name
×