IBM_THINKPAD_R51

No i want to use hardware raid, im trying to flash the new firmware on it which may fix the problem but the problem i am running into now is that I need firmware version A03 as an intermediary before A17 but I cannot find A03 anywhere. THis is driving me fucking crazy

Hello all, I am migrating from a poweredge R910 to an R920, The R910 uses a Perc H700 raid controller and I have sas hdd's and sata ssd's on em and they work fine The R920 uses a Perc H730P raid controller and that will detect the sas hdd's but NOT the sata SSD's it detects sata hdd's just fine tho. crucial ssd's will say they all failed even though they work fine and their smart data is fine samsung ssd's will have a green led but are still never detected. Any ideas?

So we had a situation where there was 4 fake Intel cpus at our best buy, i7-12700 3x i9-14900k You can tell the markings on the ihs is fake it's not the proper type of engravings. We tested them in 4 motherboards and they all didn't boot We had to get one from outside our inventory to get a real one Watch out guys always test ur shit before the return period ends best buys is only like 14 days.

Still not done yet buuuut

So im the type of person to use all the power I can get so would an R930 (if one exists) use the same power as the r910 but have a shit ton more power? Also looks like ima get 2 smart ups 2200va.

What exactly do you mean by what kind of power? Rn it's like 4 20 amp circuits. Also Tru I do need to move away from the r910 but I have a plan for that next year, even then I still do need more runtime. Budget isn't too big of an issue rn although I do want to avoid running a refrigerator ups. Also yeah the r910 runs 550 idle and 800-900 full load.

So I am going to add a powervault MD3200 to my R910 via a H800 Raid card. I also want to add a Poweredge R710 too. But i needed to cable manage my rack before i did any of those. the question is i already needed more runtime than my smart ups 1500 (3 of 4 PSUs from R910) and the Back-ups pro 1000 (1 of 4 PSU's and all networking gear) but the powervault and r710 needs to be backed up too. should i go with multiple more (rack mount versions) smart ups 1500's or go wiht a single 3000va Before: After:

oh no i definitely hate apple, I work in geeksquad and apple repair system is very frustrating, as for other things i still cannot understand why you cannot connect your apple phone to a computer and treat it like a usb drive. I could go on but im actually here on the forum to try to fix a server issue i have

Hello all, I have a Dell Poweredge R910 with the Perc H700 integrated, I have installed Dell openmanage in a VM, connecting it to the iDrac6 was easy and it detects things like ram, psu, and cpu However the problem is that it cannot detect the status of the raid controller, the drives are the incorrect listing, and not all of the VD's are showing up. Anything im missing? Here are some screenshots: keep in mind in the installed software tab some of the versions it lists are incorrect and have been updated since then

if im correct the actual button that goes on there will have some sort of pad like a carbon pad that shorts the connection...see if its worn out or something.

have you tested another pcie card in the riser that goes to the x1 slot?

Nice, can you mark it as the solution then?

im def gravitating to the Fidelio X2HR right now, they seem to look more comfortable and has the correct input i need, also the reviews suggest it sounds better in the low ends

well my workstation is kinda far from my desk and i have a long aux cable going from my sound card directly to my headset which is why i need an aux input, also id say mu budget is like 100 but if its a little over its fine.

its not specifically dell since they dont make chipsets, its just that the Intel GNA Scoring Accelerator modual is also on that laptop

That hardware ID is for the Intel GNA Scoring Accelerator modual, this should have been installed with the intel chipset drivers but it looks like it failed, what you can do is take the exe for the chipset driver setup and use 7zip to extract all the drivers, then in device manager right click on the base system device, click on update driver, then click brows manually for the driver, then click on browes and point it to the extracted drivers.

Currently i use a separate mic and headset, the headset i use is the sony wh-h900n. It has bluetooth and also aux input, it has a mic if u use the bluetooth but i just always use the aux input. The problem is that these headphones are very very uncomfortable. I got them new off of ebay for 50$ so i donno what to expect from them but i cannot keep them on for more than one CSGO match. Because of this i have fallen back to using my altec lansing vs-2121 2.1 desktop speaker system but i need something for nighttime or when i listen to music outside. Do you guys know of any good sony, bose, etc headset models that are more comfortable? It doesnt exactly need wireless but its better and it def needs an aux input. Thanks in advance.

that being said most hard drives cant variably change their rpm so the HDD would just access the platters less often.

Yo just an everyday normal guy here with a poweredge r910 and four intel xeon e7-4870's thats LGA 1567!

80% of the time when you create a new array the controller will initialize the array meaning that the data will be lost. ive had some random raid controllers here or there be able to copy over from one drive to another but thats an edge-case...id recommend backup up your data.

well tbh with out that error seems to have popped up in event viewer many many times, and you havnt crashed every time one of those appeared or else the computer would be unusable....so tbh it kinda sounds like a windows OS thing or specific software thing. Have you tried to run this command? sfc /scannow it stands for system file checker

Well If we assume a max of about 110 for the cpu on max load, and the 3090 according to multiple online source about 460 watts peak, and leave 100W for everything else then thats already 670 watts without any overclocking at all and when the gpu spikes that goes to 600 watts so thats about 810watts...even if the 750Watt psu can handle a spike of 810 watts i doubt it would last that long. Ive had a antec 1000W psu thats about 10 years old now go perfectly, but that was never loaded up...if i had ran that at almost full tilt the entire time plus spikes im sure it would have died much earlier

Making a high amperage usb charger isnt hard but I know that Anker is pretty good.

well other sources also do point out the about 600Watt alone transient spikes that the rtx 3090 is known for...so that would trip overcurrent protection of the PSU