Jump to content

Khoomn

Member
  • Posts

    250
  • Joined

  • Last visited

Everything posted by Khoomn

  1. Thanks for that, ill look into it sometime tomorrow as it is late, ill get back to you if anything is wrong.
  2. So to run the program i do "java -jar program.jar" and it starts up the program, so once it "shuts down" it basically cancels that command and opens a new line for me to type on as if i pressed ctrl+c to stop it Edit: I run the code in screen so i can close out of the terminal, its supposed to be running at all times
  3. So I bought a VPS from a VPS provider today and i need to run a java program on that server, the program connects to a website and if even a single packet is lost on the VPS, the entire program shuts down and i have to manually restart it. Is there any way I could make a script that runs that pings the website and when there is no reply back from the ping it automatically restarts the program? I tired out systemd and it didn't work. It launches the program and acts like normal, it just doesn't restart the program on failure. Are there any other programs or code that can restart on failure or code that can restart it on a time setting, like restart every 30 minutes?
  4. 1. I tried it on my old 1060 which I know for a fact my displayport worked on there. 2. No, I have no other monitor in my house that uses displayport. 3. I bought a brand new one from bestbuy 4. Only monitor with displayport on it. 5. Everything is fine with nvidia panel 6. I DDU my drivers and reinstalled them. 7. It was working fine on dp/hdmi without OC before it broke
  5. I tried forcing it to DP and it is blank for 10 seconds then reverts automatically back to HDMI
  6. So when I first got my GPU 2 months ago, I overclocked it right out of the box when I installed it. I got to +130mhz on core and +1000mhz on memory. Everything has been smooth sailing (except for a tiny bit of coil whining). A couple of days ago I turned on my pc and my main monitor wouldn't output displayport, the hdmi port worked fine but no displayport. I tried putting in my old 1060 which I knew had a working displayport and nothing popped up on the monitor. Today, I'm running my main monitor on hdmi. I turned on my pc when I woke up and all my RGB and fans turned on and everything was fine but my monitor said out of range, I restarted my pc and everything was fine. I go downstairs and come back upstairs and my monitor says no input detected, restart pc and then said no input detected, restarted again and im perfectly fine right now but could overclocking my memory to +1000mhz damage any of the displayports or hdmi ports on the card?
  7. So when I first got my GPU 2 months ago, I overclocked it right out of the box when I installed it. I got to +130mhz on core and +1000mhz on memory. Everything has been smooth sailing (except for a tiny bit of coil whining). A couple of days ago I turned on my pc and my main monitor wouldn't output displayport, the hdmi port worked fine but no displayport. I tried putting in my old 1060 which I knew had a working displayport and nothing popped up on the monitor. Today, I'm running my main monitor on hdmi. I turned on my pc when I woke up and all my RGB and fans turned on and everything was fine but my monitor said out of range, I restarted my pc and everything was fine. I go downstairs and come back upstairs and my monitor says no input detected, restart pc and then said no input detected, restarted again and im perfectly fine right now but could overclocking my memory to +1000mhz damage any of the displayports or hdmi ports on the card?
  8. I feel like there is a word for this. You make a post about a problem you are having and you instantly solve it yourself. Problem was Vanguard Anticheat. Blocked msi afterburner from working properly and blocked icue from working properly.
  9. Before today on iCue i had my commander pro control the rpm of my fans based on my gpu temp. I go into it today and find out that the sensor list is empty. When I click on it, it does a dropdown arrow but nothing is there, there is nothing in the dropdown. Anyone know a way to fix this problem?
  10. I know if i get a router it would change my public ip and im able to change it whenever i want with some routers. Thats why I turn on bridge mode with my xfinity xfi, it uses the modum on it but not the router, the router gives me my ip so i would be able to change it.
  11. Alright so im looking to buy a new router, my current router/modem is the default xfinity one. I know i can turn bridge mode on my xfinity xfi box to allow a seperate router. I need one that is a decent price, nothing over like 200 usd or something like that, can do gigabit and my most important feature I need is the ability to change the mac address / ip address in some way whenever I need to. Public ip that is, not private ip.
  12. everything would basically have to be the same, speed and CL
  13. I'm pretty sure its only MW as this happened to me on both my 2070 super and 1060 6gb before. Should work fine in other games.
  14. Unplug HDMI cable from your GPU so that its not connected (You can keep the USB plug in, it wont affect it, just make sure that mixed reality portal doesn't say your headset is on) Restart your PC to start fresh basically Go to your Bluetooth settings and find the two controllers and forget them both Wait about 10-15 seconds then do one at a time Turn one on, wait for the light to turn on but be dim Hold the pair button until it starts pulsing Go to Bluetooth settings and click on find new device then Bluetooth Connect it, the light should still be dim like it was before. Repeat Step 5-8 once more for the other controller Within the same time as they have been reset, plug in your HDMI cable for your headset The Mixed Reality Portal should now be starting up, if it does not open when your HDMI cable is plugged back in, you have to restart from step 1 Your controllers should now be lit up properly if you followed this process.
  15. Yeah I tried my rechargeable batteries, batteries i found randomly in my drawer and batteries that were still in their packaging. My room is the same brightness as it always is but they arent even showing up in vr at all so the brightness wouldnt have anything to do with them
  16. I currently have an HP WMR set and last night i was playing beat saber perfectly fine no problems, but today when I wanted to play again, my controllers are connected and paired to Bluetooth but are dimly lit and wont track in VR anyone have the same problem or know a fix? i tried updating drivers and the only driver i could find was for the Bluetooth dongle i use. Update: I fixed it for a brief second, I turned everything off and unplugged the vr set, i repaired it there and turned it back on, my controllers paired and worked, stupidly my right controller died and i replaced batteries in both controllers, turn them back on and neither of them worked, i tried the same thing i did before where i paired them while nothing was plugged in and it didn't work. I'm stumped right now Alright final update on how to fix for those who cant figure it out either: Unplug HDMI cable from your GPU so that its not connected (You can keep the USB plug in, it wont affect it, just make sure that mixed reality portal doesn't say your headset is on) Restart your PC to start fresh basically Go to your Bluetooth settings and find the two controllers and forget them both Wait about 10-15 seconds then do one at a time Turn one on, wait for the light to turn on but be dim Hold the pair button until it starts pulsing Go to Bluetooth settings and click on find new device then Bluetooth Connect it, the light should still be dim like it was before. Repeat Step 5-8 once more for the other controller Within the same time as they have been reset, plug in your HDMI cable for your headset The Mixed Reality Portal should now be starting up, if it does not open when your HDMI cable is plugged back in, you have to restart from step 1 Your controllers should now be lit up properly if you followed this process. Sorry if this doesn't work for you, this is what I found to work for me.
  17. microATX is just worse for overclocking if you are into that, 16gb is only around $90 if thats too expensive and you know you are going to get the microatx with 2 dim slots, go with single channel then as you will get duel channel when you upgrade. You can overclock ram but you would need a decent heatsink on it and im not sure about how overclocking ram goes and how far you can go with it
  18. I ended up using SoftEther VPN which works fine
  19. For the GPU, the RX 570 is faster than the 1650 No comment on the motherboard, I would say B450M but its a micro atx For ram, I would go with 2x8 if you are doing ryzen but if you insist on going with 8gb do a 2x4 kit for dual channel. At minimum go with 3200mhz kit as higher speeds are good for ryzen. I personally can't find the monitor on newegg or amazon but i think i found it on there site, its a decent-ish price for 75hz 1ms, it will pair good with the RX570 as well for free sync
  20. This seems like the right category to put this under. I bought a VPS from 100up.org to use as an OVH VPN and using OpenVPN. I have set it up properly many times but every time I try to connect to it, it just freezes. In the beginning when I first got the VPS I connected once, everything worked except for discord, I then disconnected and tried reconnecting and it never connected again. Everytime I try to connect now I get the same thing happen to me (see image). I am sending out data to the server but nothing is coming back to me. Is there a chance that UDP is blocked from their end or is it something on my end? The port is 443 like I am told it should be for VPNs
  21. Nevermind, I fixed it. If anyone somehow comes upon this thread looking for the answer. I just went into iCue -> Settings -> Select the Commander Pro -> Update -> If it says you have the latest version, just force update to latest version anyway -> Restart Program. It should then display voltage and the performance section Alright nevermind again, its a temporary fix, it removed my performance section again. I need a complete fix.
  22. So I'm not exactly sure when this happened but it might have been when i switched motherboards, but I went to iCue to check something on my fans and when I clicked the commander pro, there is no performance tab anymore for me to control the fan speed. The fan rgb is fine, the fans still ramp up speed as if my custom curve had been set but im not able to change it. the 12, 5 and 3.3 volt tabs on the right all say 0. Anyone know a reason or fix on how to go about this as I am confused why every feature but this would work. Edit: When I restart the program I get the performance tab back for 5 seconds and then it just disappears
  23. should i use that one still? I have the wraith max not the prism, unless the prism is the max nvm its the same thing
×