OK so I am going to attempt to sleeve my own cables. The plan is to run black cables from my PSU, because I just feel like that never looks right with colorful cables, then switch to my custom color scheme behind the mobo and run the cables where they need to go. I am doing research and I am just confused. On close inspection with the 24 pin I had previously been using the wires cross all over the place between the connectors, but I looked at a pinout and they all line up so that pin 1 on one connector has the same voltage as pin 1 on the other connector. So I am just wondering do I need to cross around all the wires like my current cable or can I just run them straight across. Any help is helpful. TY