SeeSound

Sennheiser HD 560S - HiFi Over Ear Headphones - Black Creative Sound BlasterX G6 Samsung Odyssey G7 QLED Gaming Monitor 32 inch 240Hz SteelSeries Rival 300 Black Ducky One 2 SF 65% RGB MX Speed US MSI GeForce RTX 3070 Ti Ventus 3X 8G Intel Core i7-11700KF Be quiet! Dark Rock Pro 4 CPU Cooler Fractal Design Torrent Black Solid Midi Tower WD Blue 2TB HDD MSI Z590 Pro WiFi SSD 1TB SN550 Blue NVMe PCIe M.2 Corsair RM850X (2018) 850W PSU Kingston Fury Renegade Black 32GB DDR4 4000MHz RAM

up

drivers installed , microphone is lamp is working and system sees that its in, but in software like Viber, Skype or Discord, its just invisible impossible to choose something, i tryed to listen to microphone but system doesnt let me hear something also i tryed to plug in intro different ports, this all is just weird

its like on standart place where they were from factory setup for this case

this is ingame normal is like 35-40

its in xmp1, i just got also new modules from kingston fury renegade 4000 mt/s kf440c19rb1k2/32

Hello, when i builded i were a bit of paranoya that water will leak on gpu or something, but on the moment it seems that air cooling its just doesnt enought to keep it cool, im thinking about one water cooling but what is gonna be best solution for this case of scenarion, its gonna be just also waste if i have to throw away already delivered with it fans, any solutions? case is Fractal Design Torrent Black Solid its comes with (3x Dynamic GP-14 + 2x Dynamic GP-18) dark rock pro 4 11700kf msi z590 pro wifi

im just lazy to takeout bios battery, suggestions?

when i play this happens sometimes screen turn black and have alttab to desktop

so I think one of the fans is broken and it's middle one 135 mm, I just wanted to buy another without everything removing and sending back but they have only 2 versions of 140mm and 120, or 140 also will fit?

it helped for while but then same problem after starting a game, should get another fan?

nah it's still there after starting up systems, maybe scratching or something I don't know

it helped, I ran stresstest seems that when speed up or goes down it still has this problem, maybe fan is bad or something, but after unplugging has no problems and sounds such bad anymore,

what do you mean fan stops, is it safe to replug it while system is on?

I unplugged fans for couple sec, noise were gone, plugged back it came back so it's seems like something with cpu fans?

what can I expect is this bad?

what is vrm? nothing too serious? all fans connected to hub with cpu fan so it's gonna be pain in ass trying to unplug all

so it's started to give this weird noise MSI Z590 PRO WIFI I ttyed to hear closely where it's coming from look like input output ports on motherboard

so its impossible to get stable 4400?

MSI Z590 PRO WIFI + 11700KF + Patriot 16 GB DDR4-4400 ( PVB416G440C8K, Viper 4 Blackout, XMP) after fresh install i just pressed xmp profile, cpu went to 4.9 and memory to 4400, after 2 week of usage i wanted to change fan speeds in bios, i noticed that profiles reseted i putted them back on and reseted went in windows and it just started to freeze also i noticed that it putted with cpu OC genie to 5.1 and without it to 5.0, asking myself why number changed by 100 if it were 4.9 anyway, i tryend also to put it manually but it has the same result freeze in windows or not even passing by, i can just only use normal mode with cpu on 4.6 anb memory on 2667. What to do and why is xmp doesnt work anymore??

ehh it's gonna be mess, already ordered some splitters

that's annoying, we're already afraid about this

so problem is that cables from drp4 are short and I cannot connect them to fan1 on hub , basically I have 5 fans from case which are connected to hub and 2 in 1 which connected to cpufan, I have also 6 pins free on mobo 1 pump 4 pin connector, I would like everything run on the same speed or maybe leave drp4 connected directly to cpufan 4 pin and other case fans just leave as they are what should I do, like this is literally a joke that there is no extending cpu fans cables or something. What if I cannot hub directly to sysfan will I be able to control fan speed? should I just order extra fan cable extender or something?

to Intel, I remember that on last pc I enabled xmp and it also changed cpu clocks, how to avoid it?

hi didn't build a new one for quite long time as I remember if you enable xmp it will autotically change cpu also, what should I do guessing that I want to run my cpu custom on 5.3 and ram how it's says on box arround 4000?