bsancken

I'm not going to suggest a motherboard based on slot spacing. Rather, you can use PCIe risers (preferably shielded) to extend the connection to the slot. That way you don't have to worry about them fitting on the motherboard, but that doesn't solve fitting them in a case or cooling them.

If you were to buy a cooler, How much would you want to spend? USD Give us a price and we can recommend better coolers. Please upgrade, stock coolers aren't meant to be used longterm.

If I set my phone below the ledt speaker grille on my MacBook Pro 2014 15" it sensed the magnet and goes to sleep. Maybe your laptop did something similat and you ended up turning it off then on when you were waiting for it to wake up.

It is a modem with a wifi antenna and 4(?) Lan ports so it can act as a stand alone. I think "LasersPewPew" got it right, Ill try it tomorrow unless you disagree..

Whoops Sorry, forgot to make clear that AA is my modem for the internet, would I plus the other two in to AA via the lan ports? Thanks -- And yes everything on the same network. 1 more Q- Would there be any disadvantage to having the modem assign ip's and route traffic opposed to the Timemachine? I will have 10+ wired devices from a network switch and 15 or so wireless clients...

Hi, let me get my hardware down first Netgear DGN2200v3 -- Modem with wireless turned off? - will refer to as AA Netgear R6300 -- AC route, Would like to have this broadcast a 5 and 2.4g network under same ssid - will refer to as BB Apple Timemachine -- My main router up to this point - would like this to be the most accesible for my wireless macbpro to backup to Also would like to broadcast 5 and 2.4g network under same ssid -- CC Total of 2 visable networks with 2 in each band... also need a guest 2.4/5 What I would like to do is have devices on the AA and BB wireless networks see each other as if they were on the same network. My problem is that I have gotten 2 new 3D systems Cube Ekocycle printers and need them to be on the same network as my mac but it seems to have trouble connecting to my apple wireless net(CC). I have to be on the same network to print over wifi from the mac. So my question is- what would be the best device to be the Dchp server/ which would work better? 2 - what to set AA as (dchp wise) if BB or CC will be the Dchp server? 3 - which Wan to Lan/ Lan to Lan connections need to be made to where? Thanks Bsancken

Nope?... Darn

Hi I was wondering how I could download the video that is within the Volar Video player.... ( here ) https://www.ffa.org/Events/conventionandexpo/Pages/Convention-Broadcast.aspx or on iHigh http://www.ihigh.com/ffa/ ----I was looking for either the 2nd General session or the 7th General session.... I have looked at the source code somewhat but I cant find where the stream data/link is... I was there, my chapter payed everything so, no I am not "stealing" it or anything, it is avaliable online for free, except we cant show it at our chapter meeting as our internet makes it impossibe to stream live and Volar wont preload far enough.... Thanks!

Oooo I love the MicroSD being accessible from the outside unlike the S5, and the skins are fitted so nicely I wouldnt be able to tell that it wasnt a skin!!

Alright, Im not quite sure where to put this, so here it is. Im looking for a OBD II scanner that will connect to my s5 via bluetooth that is from a TRUSTED supplier. I have found lots of them on amazon but there are just about as many bad reviews as good... I am hoping to clear a SRS error code that I accidetly tripped in my Mitsubishi Endeavor '07. Thanks Brent Sancken ps- Mods may move this post if there is another applicable area for this...

--Sorry It double posted-- DELETE

I'd Have to say that my favorite thing about the LG G3 is the laser range finder! Once this has been out for awhile, I hope that developers can gain access to the laser to allow them to scan objects in 3-d to create a model or use for finding the distance and printing to the screen.

Alright, what/where would be a reliable source for a riser? Idid look at them breifly, but I read many bad things about them.. I probable only need to raise it maybe half an inch, altho then I wouldnt mount it in the slot correctly..

Alright, So I currently have the Asus Sabertooth Z77 and I bought 2 new 2-slot cards to do a 3 way sli, however the 3rd slot cannot be populated because the card will hit the usb headers, fan, and the power button connections.. etc.. ) So, I would like to get a new motherboard for the same socket(1155) and be able to populate with atleast 3 dual slot cards. (Also Needs to be ATX sized..) Any Reccomendations? (My case is blue/green color/light themed so it would be a bonus to match but that would be the lowest priority) On a side note... I know it wont be able to run full 16x on all 3 but will there be much of an impact on performance? Thanks Brent Sancken

Alright Thanks!