Jump to content

Uptivuptiz

Member
 View Profile  See their activity

  • Posts

    1,909

  • Joined

  • Last visited

 Content Type 

Everything posted by Uptivuptiz

  1. Uptivuptiz
    By far the best VR headset for consumers is the Valve Index.
  2. Uptivuptiz
    The only other thing I can think of for now is buying a cheap USB to 3.5mm jack adapter and test with that.
  3. Uptivuptiz
    If you have a headset with a USB dongle try and use that. If there's interference in the motherboard there shouldn't be a problem with the headset that uses USB.
  4. Uptivuptiz
    If you have a secondary PC on hand I'd recommend that you connect the SSD to that and format it with Diskpart. Follow this guide until step 7, then go to Disk Management and format the drive like you normally would.
  5. Uptivuptiz
    What I do to test if an OC is stable is downloading Cinebench R15 and then launching it, then going to File>Preferences and setting Minimum Test Duration to 600 seconds. Then I start the benchmark. If it crashes before the 600 seconds has passed I see it as not stable.
  6. Uptivuptiz
    Is this the primary storage device of your system? If not then you can try and format it.
  7. Uptivuptiz
    Try removing the app with this Powershell command (run as admin): Get-AppxPackage *bingnews* | Remove-AppxPackage
  8. Uptivuptiz
    Sounds to me like something is making interference on a hardware level. Has this issue been there ever since you bought the Aorus B450 Pro?
  9. Uptivuptiz
    Now, I don't own a custom loop and have never worked with one, but I hear the general rule of thumb is to clean the loop every 6 months.
  10. Uptivuptiz
    If its only assigning one IP per port, then using a router would fix the problem since it creates its own network and distrebutes IPs of its own. No need to rely on the dorm router to do that.
  11. Uptivuptiz
    I recommend the ASUS Zephyrus G14.
  12. Uptivuptiz
    Minitool Partition Wizard is a great tool for managing storage devices.
  13. Uptivuptiz
    I think you should keep it as it is now. The 2 bottom fans will supply air to the GPU and the 2 front fans will transport air to the D15. Optimal setup in my mind.
  14. Uptivuptiz
    Check the output on the screen. Trust me, I've made this mistake many times where I thought I had dead hardware, but I just forgot to change the output source on the monitor.
  15. Uptivuptiz
    Ah I see. I'd recommend reading the instructions to make sure the process goes smoothly. I you need assistance with any of the steps please don't hesitate to ask
  16. Uptivuptiz
    Have you done a clean reinstall of the Nvidia drivers with DDU?
  17. Uptivuptiz
    If you have your display connected with displayport that might be the issue. I've seen cases where the PC won't show the BIOS screen if the monitor is running with displayport. For optimal compatebility use VGA, but HDMI or DVI should also do fine to begin with.
  18. Uptivuptiz
    As @Beerzerker stated above Furmark is a GPU killer. I'd recommend you use Heaven benchmark instead.
  19. Uptivuptiz
    Banned for not knowing what pfp means.
  20. Uptivuptiz
    It is possible to have multible installation ISOs on one USb drive with something like MultibootUSB or YUMI, however I don't think making a USB to boot a fully fledged Windows OS is possible.
  21. Uptivuptiz
    My general rule of thumb is anything below 100 C when under load is safe.
  22. Uptivuptiz
    Those commands use a tool built into Windows. They do not require the hacktool so go ahead and delete it. Also the article shows you how to activate Windows with codes that you yourself havent purchased. This forum doesn't condone piracy so I'd suggest that you just purchase a key for yourself.
  23. Uptivuptiz
    I've never heard of activating Windows in CMD. I'm pretty sure he uses CMD to call commands to the hacktool. The proper way to activate windows is through Settings.
  24. Uptivuptiz
    The top one is CPU2/Waterpump header and the bottom one is CPU1 header. Found this in the manual.
  25. Uptivuptiz
    That depends on wether or not the BIOS fan control supports both PWM and DC. I'm pretty sure MSIs fan control supports it.
×