omCassholeo

Update: Today, the top card magically turned on and worked by itself. I have no idea what happened. I was just using the bottom card yesterday. I just booted it up just now, and noticed that my monitor wasn’t displaying anything, so I swapped the cables back up to the top card, and it just worked. Does anyone have any idea why this happened???

I have now tried reflashing the bios, clearing cmos a few times, did a fresh install of drivers and did a fresh install of windows 10. Nothing helped, I guess I will have to take the sustem apart to see if the card is is the problem. Both cards are not showing in the bios GPU Post, and obly the botoom card is showing in device manager. So I will try reseating it, if that doesn’t work I guess I will have to rma it.

I will try installing an older driver and will let you know how it goes.

I have tried installing the drivers again but no luck with that. The card does not show up in Device Manager, it is only showing 1 card at the moment. I have tried clearing CMOS quite a few times and it does nothing. It is very frustrating because it was working just until I restarted the system. And I have absolutely no idea what caused it to stop working. Thank you for your advice.

The GPU is not showing in the BIOS page, and it is not showing up in Device Manager also.

Hi, I have a problem with my 2 GTX 1080s in SLI. They were working earlier on in the day, but when I restarted the system the top card never displayed anything again. I have the Asus Rampage V Edition 10 motherboard, and I have tried disabling the bottom card and booting with only the top card, but nothing appears on the monitor. So I tried disabling the top card and using only the bottom card, it boots just fine. I am using the EVGA SLI HB Bridge, it did light up earlier but now it's not lighting up at all. I have not tried taking out the cards yet because I have a hardline custom loop. I haven't had the time to take the system apart yet. This is the first time I have encountered this problem and have no idea what is going on with my system. Is it possible that the top card is busted??? Your opinions will be greatly appreciated. Thank you in advance. PS. I am sorry for my English, it is not my first language.

Ok, this is weird. When I first overclocked the cpu to 4.0Ghz. I started with 1.35v, the system did not even boot into windows. So I started to bump up the voltage up until I got to 1.380v, and it was stable. But after I downloaded Intel XTU. Dropped the voltage down to 1.300v at 4.0Ghz, it seems to be stable. How is this possible???

Thank you for all of your advices. I will go back to 4.0Ghz. What do you suggest is the max voltage for a 4.0Ghz???

Hi, this is my first topic on this forum. I have been doing some digging around and have not found a precise answer to my questions, so I have decided to start a new tread. I have a 6800K on the Asus Maximus V Edition 10 motherboard. The system has an open loop water cooling setup. I have it overclocked to 4.2Ghz with 1.410v stable. Is this overclock too high for the chip??? It's not stable with anything less than 1.410v at 4.2Ghz, not even 1.405v. Dropping it down to 4.0Ghz it takes 1.380v for it to be stable. Should I drop the overclock back down to 4.0Ghz or is 4.2Ghz alright??? Is my chip a bad overclocking chip??? Temps at 4.2Ghz is around high 60s to low 70s. Thank You in advance for any advice.

I love the whole set!! The headphones look really sleek and the mouse and keyboard look mean as hell. All in all it's a fantastic looking set to have in front of a desktop.