Jump to content

Squirrel724

Member
  • Posts

    1,038
  • Joined

  • Last visited

Everything posted by Squirrel724

  1. Twice this week I have booted my PC up to find the pump on my Kraken X72 making quite the racket. It sounds like a hard drive under a heavy load but quite a bit louder. That's the only way I can describe it, like a hard drive clicking. It's not the gurgling you get when there is air in the pump and tilting the system doesn't change the sound. After letting the system run for about 15 minutes the sound goes away and the pump sounds like normal. Thermals are exactly how they have always been with this cooler. As mentioned this has only happened twice so far, first on Monday and then again today. Cooler was bought brand new in mid December 2019 and the radiator is installed vertically in the front of my case. Is this OK behavior or should I be starting the RMA process for this cooler? I'm jumpy because this is my first time with a liquid cooler and its not a cheap CPU that is being cooled. I don't want to have to discover first hand what NZXT's policies and procedures are in regards to CPUs damaged by a failing cooler. The noise also isn't consistent enough that I could be confident that NZXT would be able to reproduce it if I do send it in for RMA. Looking for advice. Is this a quirk of AIO watercooling and perfectly fine or a sign of a failing pump? Is NZXT's service good enough that they would swap it even if they weren't able to reproduce the noise right away? Should I just run it until the noise is constant or worse the pump dies, killing my 3900x and hope that NZXT replaces both of them?
  2. That bottom radiator is massive, how thick is that?
  3. What are you looking to do with the computer? TR4 is already a dead platform with 3rd generation Threadrippers using the TRX40 platform instead. AM4 will be getting the 4000 series Ryzen CPUs before being replaced.
  4. That's Disney's way of keeping people from bypassing region locks using a VPN. There may be VPNs that can trick the login servers but I haven't heard of any and Disney would likely be working to shut that method of access down.
  5. Windows does see both DIMMs but for some reason it has hardware reserved 8.0GB of it (bottom item in the small text). Your issue isn't hardware, there's something in your BIOS or Windows which is reserving that memory.
  6. Until a product makes it to production it's still a prototype. Yes, the roadsters have been shown to the public and have been seen but they are still prototypes and still far from being ready to go to production. If they were actually more than prototypes and display models they would be producing them and selling them so they can make money.
  7. Built into the processor. The Intel Arc / AMD product page for your processor will tell you the fastest speed your processor is officially designed to meet.
  8. The DDR4 specifications include various standards for up to 3200MHz. What 3600+MHz DIMMs mean for you is that the DRAMs and layout of the DIMMs are designed and tested to work at those high frequencies. What you are actually doing when applying an XMP profile to get to your RAM's listed speed of 3600+MHz is overclocking the memory controller to run at speeds higher than the DDR4 standard it was designed for. Take for example my build. I'm running a R9 3900X with Corsair 3600MHz RAM. If you go to AMDs product page for the 3900x you will see that the memory controller in the processor is rated at 3200MHz meaning it is designed to meet the DDR4-3200 PC4-25600 standard, the fastest standard in the DDR4 specification. While Corsair has rated my DIMMs to run at speeds of 3600MHz my memory controller is being overclocked in order to reach those speeds. Where that line for overclocking is moves based on the processor in the system (for example an i9 9900k is only rated to DDR4-2666 PC4-21333) but anything past 3200MHz is an overclock as that's the fastest the standard goes.
  9. Because it is physically impossible to make a game on the scale of Mass Effect within a year.
  10. You can only see so much on the visible spectrum. Planets, stars, nebulas, etc. all emit different forms and amounts of radiation on the radio spectum and you can learn a lot by studying this radiation, far more than you could ever hope to learn with an optical telescope. The scientists couldn't care less about looking for alien broadcasts.
  11. You plug the monitor, keyboard, and mouse into the KVM. You then plug the 2 computers into the KVM. It only uses one input on the monitors (in your case the display port input).
  12. Romer-G's implementation of tactility is garbage. The way it just holds and then suddenly gives up just feels awful. The tactility of Cherry Browns is much better and simply provides a nice bump to indicate where the switch activates without causing the switch to collapse after the bump. Cherry Clears are even nicer with more tactility than the browns and after the bump the spring actually gets stiffer, actively preventing you from bottoming out.
  13. Mice use microswitches for their click. Microswitches are often used in industry where they are commonly used to detect when something is at the ends of it's travel. The metal spring plate makes for a larger target on the switch than the little nub in the switch and also allows the switch to be triggered sooner, preventing you from having to crash into the switch itself. If you open up a mouse you will discover they remove the spring plate from the microswitches.
  14. Is NCIX actually dead dead? I thought they were just going through a bankruptcy restructuring.
  15. I'm really glad I went for the clears. The tactility is great and my G710+ with browns now feels like it has linear switches in comparison.
  16. https://mechanicalkeyboards.com/shop/index.php?l=product_list&c=13
  17. There are mixed opinions on the Romer-G switches in the G810. Some people love them while others hate them. I would find a way to try them before you buy them. Best Buy and other tech stores usually have some keyboards on display for you to try.
  18. Looks like it is a dome with slider keyboard. Works like a membrane board but instead of the keycap pushing directly against the membrane the keycaps are mounted on sliders which push the membranes. The descripton of "110 mechanical shaft keys with liquid silicon generating mechanical resilience with a lubricated key stroke feel" seems to confirm this.
  19. Just got this board a few weeks ago. Vortex RACE 3 with Cherry MX clears. Really liking the 75% layout and Clears are my new favorite switch.
  20. Click the ADD button to add the PUBG .exe to the list of programs.
  21. Right click on your desktop and select NVIDIA Control Panel. Select the program settings tab and pick PUBG from the drop-down list (you may have to add it using the ADD button). You will then be able to see the preferred graphics card for the game.
  22. Is PUBG set up to use the 1050ti in Nvidia Control Panel? Sounds like it might be running on the iGPU.
  23. Yes. The USB needs to be reformatted as a bootable disk which will wipe everything off of it. I don't have any of my install USBs on hand but if I recall correctly you have to reformat it again if you want to use it as a flash drive again. Edit: Using the Windows media creation tool (https://www.microsoft.com/en-us/software-download/windows10) is the best way to go about creating Windows 10 install media.
  24. With my G502 I find that the sniper button sits in front of the end of my thumb and I actually have to reach forward a bit to hit it.
  25. Its pretty cool to be one of the few teams who has competed under multiple numbers in their history. Before 1998 teams were assigned new numbers each year alphabetically by primary sponsor (for example my team was number 44 in 1997 before being assigned 61 in 1998). In 1998 numbers were assigned like previously but then they became permanent into the future. Very few teams get to say they carry a sponsor assigned number (only 1-208 were assigned in 1998 and I would wager less than 100 of those teams still compete today). Even fewer have ever competed without a number (teams weren't given numbers until 1997). There are some younger teams who get to run lower numbers because if a team splits from another team they are assigned an available number from the parent team's formation year.
×