Klingon_Warrior

I am using a HDMI to VGA, and VGA to ADC (apples connector) and it flashes the code for unsupported resolution with any of the Ones resolutions.

No the Xbox one only supports 1080 and 720

Where does it show that, In the standard display resolution settings?

So basically i have an old apple monitor that has a resolution of 1680 x 1050 and my original plan was to use a bunch of adapters and connect it to my Xbox One, but unfortunately it didn't work because it doesn't support any of its resolutions (because Apple likes to be special). But then i managed to build my old PC back together in a drawer and connect it and use a wired Xbox remote to control the desktop and such and i have been using that for Netflix, which was my original intent. But recently i have been wanting to join all of my console peasant friends and I am trying to figure out a way to change the resolution going to the monitor to enable use of the Xbox One. I was looking into capture cards and that could be and option, but i don't want to have to pay that much, I currently have an HDMI to USB adapter and i was wondering if with that i could use USB as an input for video and display it with a software. Any suggestions?

I would want the New Razor blade 14 because of the 1060 which would WAY surpass the 960 in my desktop, and with the 16 gigs of ram should be sufficient for my tab spamming needs. Thank you soo much LTT and Razor just for a chance to win this beast of a laptop!

ok so i have found the problem my motherboard has a "slow switch" that you can turn on while experimenting with overclocking to not accidentally destroy your computer, but the switch seems to be broken. the switch is in the off position but the led indicator light is on stating that slow mode is on. so i turn it on then off again, the light turns off but slowly fades back to life, at the same time my processor speed reduces. i have gone for a week or two without it fading back but it suddenly started doing it again. i will attach a video of the switch and light.

CPU-Z says that my CPU voltage it 0.736 volts, could this be the source of my problem?

so i have updated my BIOS and that didn't help and i did reset my bios settings earlier and that didn't help. Does resetting the BIOS do the same thing as resetting CMOS?

my temps never go above 40c, and i have the MSI B150 M3 MOBO. and im in hight preformance mode in windows.

So my I5-6500 CPU for some reason stays at 0.77 gigahertz an I5 6500 should be around 3.20 gigahertz, as a result even games like Minecraft have become laggy with low framerates. I have tried to fix it in my bios but no matter what i change the speed that the BIOS and Task Manager display will not exceed 0.80 gigahertz.Thank you for any assistance in this matter!

But doesn't the Razor Core use USB Type C?

With the release of the new Razor Core graphics dock, i have been wondering if it could be used in SLI with another video card installed onto the motherboard in the system. This would be for a desktop an would require removing the side panel of the case to allow access with the SLI bridge. And since this would be from a desktop not a laptop there would probably need to be a PCIE Thunderbolt-3 card in the computer. Since what causes limitations on weather or not a motherboard is SLI capable, is the bandwidth of the PCIE 16X slots in the system. Could this be a workaround to allow people with non SLI motherboards to still use SLI? This would be a completely impractical solution and would be much more cost effective just to upgrade your MOBO for $150 instead of paying the $500 for a Razor Core. This is purely hypothetical and i do not intend to use in any setup. Any insight would be appreciated! Thank you!

I need this keyboard because i have a cheap strange mechanical keyboard with only one color!

YEES ME WANT NOOOW GIVE!!!