yogeshnaidu

So im going to rebuild the loop in my case while at the same time doing some upgrades. Here is the current condition of my case :-

Case labs mount was not suitable and only can support up to 4 fans. Made the the front mount for all the fans using ACM, diy.

Im sorry i know this is a crime for such a case. Will definitely do some proper cable management.

 
First ordered some parts

 
Next ordered some fittings from tabao. Silver and gold fittings. 16 mm od and 14 mm id petg tubes from barrow.
Looks like these

Dont have preview for gold and silver but it will look like these

 
Next upgrading all the fans to silent wings 3


 
 
Currently using 3 x 480 aqua computer airplex radical radiators. Im aint sure but was planning to change to hardware labs rad like 2xgts for gpu and 1x sr2 for cpu. Let me know in the comments whether i should since the current radiator is just fine. I was just thinking whether changing to hardware labs is a step up in performance but also got me thinking whether it will be worth it since hardware labs rads aint cheap so i put this on hold but have to decide by tomorrow. 
 
Ordered some rgb led in tube to be inserted inside the reservoir. Hope is will looks as good as imagined. Cpu will have a silver theme will gpu will have a gold theme. Have some mayhem coolant to go with it.

 
 
Yap thats the stuff i planned out. Waiting for parts now. Right now i only have the fans about 17 of them which took like 4 months to receive it. Once i get my petg in my hand i will start bending and add my progress here. Hope it goes well.
 
Btw pc specs
 
6850k
Dominator Platinum (4x4GB 2800mhz)
2x Fury X
950 pro 512gb ssd
2x 850 pro 512 gb ssd
 
Also as u notice the is a fan inside the case is to cool the 950 pro. Planning to get come aryclic material heat it up and do some custom mount to hold the fan facing the ssd. Suggestion is also welcomed. This is just my idea not sure i will proceed but we will see how it goes.
 
New pics replace the blur night pics


 
 

Btw bro personal experience the cablemod paracord. I had it man its really pain in the ass cause dust can easily get trapped between the paracord and its not easy to clean this cables. Especially if u have white cables in it.  Moreover if ur too rough with it or sometimes accidently stretch it. The cord will rip off from the connector. This is just my personal experience. I prefer nylon its just headache free but is less flexible then paracord. Paracord is also harder to keep in shape then nylon.

Is the carbon fiber vinyl preinstalled for the tubes or you install urself. "Carbon fiber tubes 3M Glossy finish"  very misleading haha. I actually taught 3m have such tubes trying to google it.
 
Oh well im doing a build but also following ur build cause its awesome.

I think it will work or actually im sure of it. Ur res is taller then the pump. Therotically filling both of the res till full will provide continues liquid to the pump. But to do that first u have open ur res top cap first and open up the pump out fitting to let the liquid reach the pump and then connect it. After that running the pump and continuously adding liquid on both side will do the trick.
And you are using a good quality d5. use a external psu to start the pump so u can easily turn it off of anything goes wrong like the pump is making too much noise or the pump is not pushing out the liquid. I know most people commend here can scare u saying failure of pump and etc but my loop configuration in my pc introduce a lot of freaking air bubbles. But after 15 to 20 runs of turning on and off the pump for the initial boost. At first u will have some noise due to very tiny bubbles u cant avoid it easily but after running the loop for 1 week or 2 and it will be dead silent.
Honestly i saw more complicated loops in high end pc make me think how did he manage to pull it off so yours shouldnt be a problem.

Your 6800k will do a lot more work at a much lower clock speed than your old AMD chip.  Don't worry about how clock speeds because you don't need it as much as you did with your old chip.  With BWE you should be happy if you hit 4.3 to 4.5.  4.5 being a lot more rare.

So im going to rebuild the loop in my case while at the same time doing some upgrades. Here is the current condition of my case :-

Case labs mount was not suitable and only can support up to 4 fans. Made the the front mount for all the fans using ACM, diy.

Im sorry i know this is a crime for such a case. Will definitely do some proper cable management.

 
First ordered some parts

 
Next ordered some fittings from tabao. Silver and gold fittings. 16 mm od and 14 mm id petg tubes from barrow.
Looks like these

Dont have preview for gold and silver but it will look like these

 
Next upgrading all the fans to silent wings 3


 
 
Currently using 3 x 480 aqua computer airplex radical radiators. Im aint sure but was planning to change to hardware labs rad like 2xgts for gpu and 1x sr2 for cpu. Let me know in the comments whether i should since the current radiator is just fine. I was just thinking whether changing to hardware labs is a step up in performance but also got me thinking whether it will be worth it since hardware labs rads aint cheap so i put this on hold but have to decide by tomorrow. 
 
Ordered some rgb led in tube to be inserted inside the reservoir. Hope is will looks as good as imagined. Cpu will have a silver theme will gpu will have a gold theme. Have some mayhem coolant to go with it.

 
 
Yap thats the stuff i planned out. Waiting for parts now. Right now i only have the fans about 17 of them which took like 4 months to receive it. Once i get my petg in my hand i will start bending and add my progress here. Hope it goes well.
 
Btw pc specs
 
6850k
Dominator Platinum (4x4GB 2800mhz)
2x Fury X
950 pro 512gb ssd
2x 850 pro 512 gb ssd
 
Also as u notice the is a fan inside the case is to cool the 950 pro. Planning to get come aryclic material heat it up and do some custom mount to hold the fan facing the ssd. Suggestion is also welcomed. This is just my idea not sure i will proceed but we will see how it goes.
 
New pics replace the blur night pics


 
 

Wow thats a nc temp and 45db under load thats nc man..