Terra

ayyy jackpot! thanks, man! gonna pick it up tomorrow. Take care and stay safe!

Just for confirmation as to not be deceived by own eyes, the Super Flower Leadex III Gold 650W is at Tier A, right?

I will try looking for a different PSU then. Thanks!

So pairing it with a 2060 for gaming at 1080p is a bad idea?

I know it is on the Tier D based on the tier list but how bad is it?

Shipping will be hella expensive if i were to ship it.

Brunei. The 980 Ti is awesome. It has been working for me since 2016(or 2015) but sadly, i need an upgrade since i will be upgrading to 1440p.

Sadly, nowhere to be found in my country. They're not doing pre-order as well on it.

Which one should i pick?

It is around 70 if i run FFXIV or R6 Siege and if i run FFXIV and FIFA19 (waiting for queue) it goes around 75.

Thanks for advice, man. Currently looking for the fans.

Hello to all, I have two 120mm fans on top of my CM MasterBox Q300L and one 120mm behind it, all three are use as exhaust. My question is, should i get two 140mm fans for air intake at the front panel or just get 120mm fans? I am using the stock cooler for the Ryzen 3600.

Alrighty, thanks a lot, Mr. Enderman!

So after i do a clean install, i just simply download all the driver back, right? Not sure if i should download CCC as i when i tried the All in One package for the motherboard driver, no new program are to be found.

So for the motherboard, should i install everything in the driver list?

I am quite a beginner in this matter and I have just installed a new motherboard, CPU and RAM. Should i format my boot drive and reinstall everything? For my motherboard, should i install everything in the driver section? https://www.asrock.com/MB/AMD/A320M-HDV%20R4.0/index.asp I already am planning on installing the Ryzen Master. https://www.amd.com/en/products/cpu/amd-ryzen-5-3600 Beside that, i have no clue what to do.

Hello, I am having a problem with one of the USB 3.0 port on the front panel of my CM MasterBox Q300L. If i insert my pendrive, harddisk or wireless dongle, the error "USB DEVICE DESCRIPTOR FAILED" pops up on the device manager. All of the port are working except this one. I tried using USB Device Tree Viewer and this is what i found on the Port 5. =========================== USB Port5 =========================== Connection Status : 0x02 (Device failed enumeration) Port Chain : 1-5 Properties : 0x01 IsUserConnectable : yes PortIsDebugCapable : no PortHasMultiCompanions : no PortConnectorIsTypeC : no ConnectionIndex : 5 CompanionIndex : 0 CompanionHubSymLnk : USB#ROOT_HUB30#5&6d8a327&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} CompanionPortNumber : 2 ======================== USB Device ======================== +++++++++++++++++ Device Information ++++++++++++++++++ Device Description : Unknown USB Device (Device Descriptor Request Failed) Device ID : USB\VID_0000&PID_0002\6&31F168A9&0&5 Hardware IDs : USB\DEVICE_DESCRIPTOR_FAILURE Driver KeyName : {36fc9e60-c465-11cf-8056-444553540000}\0025 (GUID_DEVCLASS_USB) Driver Inf : C:\WINDOWS\inf\usb.inf Legacy BusType : PNPBus Class : USB Class GUID : {36fc9e60-c465-11cf-8056-444553540000} (GUID_DEVCLASS_USB) Enumerator : USB Location Info : Port_#0005.Hub_#0001 Manufacturer Info : (Standard USB Host Controller) Capabilities : 0x64 (Removable, SilentInstall, RawDeviceOK) Status : 0x01806400 (DN_HAS_PROBLEM, DN_DISABLEABLE, DN_REMOVABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER) Problem Code : 43 (CM_PROB_FAILED_POST_START) Address : 5 Power State : D3 (supported: D0, D3, wake from D0) ---------------- Connection Information --------------- Connection Index : 0x05 (5) Connection Status : 0x02 (DeviceFailedEnumeration) Current Config Value : 0x00 Device Address : 0x00 (0) Is Hub : 0x00 (no) Device Bus Speed : 0x01 (Full-Speed) Number Of Open Pipes : 0x00 (0 pipes to data endpoints) Data (HexDump) : 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 02 ................ 00 00 00 ... --------------- Connection Information V2 ------------- Connection Index : 0x05 (5) Length : 0x10 (16 bytes) SupportedUsbProtocols : 0x03 Usb110 : 1 (yes) Usb200 : 1 (yes) Usb300 : 0 (no) ReservedMBZ : 0x00 Flags : 0x00 DevIsOpAtSsOrHigher : 0 (Is not operating at SuperSpeed or higher) DevIsSsCapOrHigher : 0 (Is not SuperSpeed capable or higher) DevIsOpAtSsPlusOrHigher : 0 (Is not operating at SuperSpeedPlus or higher) DevIsSsPlusCapOrHigher : 0 (Is not SuperSpeedPlus capable or higher) ReservedMBZ : 0x00 Data (HexDump) : 05 00 00 00 10 00 00 00 03 00 00 00 00 00 00 00 ................ ---------------------- Device Descriptor ---------------------- bLength : 0x00 (0 bytes) -------------------- String Descriptors ------------------- String descriptors are not available (because the device has problem code CM_PROB_FAILED_POST_START)

I can only get a picture of it. hahaha i will text the owner later on, once the sun has shine here.

Yeah, most likely i will get the 3200Mhz because stuff in my country tend to get a higher markup price.

ah, so basically i can get the 3200Mhz right away then since from what i am seeing at their shop, they have mostly 2666, 3000 and 3200.

Noted, i would rather spend an extra money on it rather than regretting it in the future, this will be my final for a while. I will ask the shop if they have any 3600Mhz in stock, if no, i will go for the 3200Mhz. Thank you so much for your time.

Hello! Will there be any huge difference in going for the 2666MHz Vengeance and the 3200Mhz Domintor for Ryzen 3600x? Price difference here is around $100 plus, not sure if it is worth it or not.

thank you for link, man! i missed your answer here. i will check the video as well before making any decision.

Noted, i would take a look on the 3700 as well, i don't do any editing or streaming. I just hope the store have some 3700 left. Thank you for your time.

Hello and good afternoon, I want to ask if there are any major difference between these two for an upgrade over my very old CPU. This upgrade is for Cyberpunk 2077 which will be release next year but mostly i want to upgrade my old build. If there aren't any huge differences between the two, i would want to go for the 5 3600x and save some cash for new DDR4 and as well as a new motherboard.