Jump to content

ttoni94

Member
  • Posts

    28
  • Joined

Awards

This user doesn't have any awards

Profile Information

  • Gender
    Male
  • Interests
    watching LinusTechTips

System

  • CPU
    Intel i7-6700k
  • Motherboard
    ASUS MAXIMUS VIII HERO
  • RAM
    2x8GB Hyperx DDR4 2400MHz
  • GPU
    ASUS GeForce GTX 1070 STRIX 8GB
  • Case
    NZXT 530 Phantom Black
  • Storage
    SSD Samsung 850 250GB
  • PSU
    Corsair CS750M
  • Keyboard
    Redragon Yaksa
  • Mouse
    Zalman ZM-M400
  • Operating System
    Windows 10 Pro x64

Recent Profile Visitors

948 profile views

ttoni94's Achievements

  1. Same issue here. It started happend after an windows update, not other changes made. Interesting that the OC and fans works normally. The only issue is the power target doesn't raise the set value.
  2. I have added 2 same PCI-E NICs with RSS enabled on both PCs and still the same problem Get-SmbMultichannelConnection still return nothing
  3. @Windows7ge I tested on my windows 10 -windows server 2016 smb and it's working only with specific NIC config. I added on my Windows 10 workstation 2 x 1gbit PCI realtek nics and on windows server the integrated realtek nic and the usb nic . And it's working on one side , when accessing the share from windows 10 workstation i get ~200MB/s( all nics are used on both sides) , when accessing from windows server I got only 100MB/s( goes only by single nic and arrived on both nics on windows 10). Also the first config integrated intel + usb realtek nic and integrated realtek + PCI-E realtek NIC works. I booted unraid and applied the IPs and settings you suggested also bypass the switch and it's multichannel isn't working at all. All normal share works and all adapters can ping each other. Also when entering this command I didn't get and response also tried multiple times(On windows it showed even when isn't working) PS C:\Windows\system32> Get-SmbMultichannelConnection PS C:\Windows\system32> Get-SmbMultichannelConnection -IncludeNotSelected ---no output, nothing---- Another stupid thing I observed when testing on windows 10 - windows server 2016, activate the integrate nic (3rd one) on windows 10 workstation the samba multichannel didin't worked any more for some reason despite there where 2 NICs that worked perfectly before. My belied is the protocol isn't working at all maybe due the NIC mixing but I can't figure out why I can't get any response from that command at all. Thanks for the suggestions.
  4. It seems the intel nic doesnt want to be rss enabled even the options is enabled. Also checked and the usb nic isnt rss capable also. A funny thing since when pairing the rss capable nics on windows server and pairing the non rss capable on windows 10 smb multichannel works like a charm.
  5. @leadeater Receive Side Scaling (RSS) = enabled on both adapters the metric wasn't the same. fixed. Still says false. How can I check on unraid part if adapters are rss capable and ok? PS C:\Windows\system32> Enable-NetAdapterRSS -Name "Ethernet" PS C:\Windows\system32> Get-NetIPInterface ifIndex InterfaceAlias AddressFamily NlMtu(Bytes) InterfaceMetric Dhcp ConnectionState PolicyStore ------- -------------- ------------- ------------ --------------- ---- --------------- ----------- 6 Teredo Tunneling Pseudo-Inte... IPv6 1280 75 Enabled Disconnected ActiveStore 1 Loopback Pseudo-Interface 1 IPv6 4294967295 75 Disabled Connected ActiveStore 2 Ethernet 3 IPv4 1500 25 Disabled Connected ActiveStore 5 Ethernet IPv4 1500 25 Enabled Connected ActiveStore 1 Loopback Pseudo-Interface 1 IPv4 4294967295 75 Disabled Connected ActiveStore PS C:\Windows\system32> Get-SmbClientNetworkInterface Interface Index RSS Capable RDMA Capable Speed IpAddresses Friendly Name --------------- ----------- ------------ ----- ----------- ------------- 5 False False 1 Gbps {192.168.1.10} Ethernet 2 True False 1 Gbps {192.168.2.10} Ethernet 3 6 False False 100 Kbps {fe80::ffff:ffff:fffe} Teredo Tunneling Pseudo-Interface
  6. PS C:\Windows\system32> Get-NetAdapter Name InterfaceDescription ifIndex Status MacAddress LinkSpeed ---- -------------------- ------- ------ ---------- --------- Ethernet 3 Realtek PCIe GBE Family Controller 2 Up xxxxxxxxxxxxxxxx 1 Gbps Ethernet Intel(R) Ethernet Connection (2) I219-V 5 Up xxxxxxxxxxxxxxxx 1 Gbps PS C:\Windows\system32> Get-NetIPInterface ifIndex InterfaceAlias AddressFamily NlMtu(Bytes) InterfaceMetric Dhcp ConnectionState PolicyStore ------- -------------- ------------- ------------ --------------- ---- --------------- ----------- 6 Teredo Tunneling Pseudo-Inte... IPv6 1280 75 Enabled Disconnected ActiveStore 1 Loopback Pseudo-Interface 1 IPv6 4294967295 75 Disabled Connected ActiveStore 2 Ethernet 3 IPv4 9198 300 Disabled Connected ActiveStore 5 Ethernet IPv4 1500 1 Enabled Connected ActiveStore 1 Loopback Pseudo-Interface 1 IPv4 4294967295 75 Disabled Connected ActiveStore PS C:\Windows\system32> Get-NetAdapterRSS Name : Ethernet 3 InterfaceDescription : Realtek PCIe GBE Family Controller Enabled : True NumberOfReceiveQueues : 2 Profile : NUMAStatic BaseProcessor: [Group:Number] : 0:0 MaxProcessor: [Group:Number] : 0:6 MaxProcessors : 4 RssProcessorArray: [Group:Number/NUMA Distance] : 0:0/0 0:2/0 0:4/0 0:6/0 IndirectionTable: [Group:Number] : 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 0:0 0:2 Name : Ethernet InterfaceDescription : Intel(R) Ethernet Connection (2) I219-V Enabled : True NumberOfReceiveQueues : 2 Profile : NUMAStatic BaseProcessor: [Group:Number] : 0:0 MaxProcessor: [Group:Number] : 0:6 MaxProcessors : 4 RssProcessorArray: [Group:Number/NUMA Distance] : 0:0/0 0:2/0 0:4/0 0:6/0 IndirectionTable: [Group:Number] : PS C:\Windows\system32> Get-NetAdapterHardwareInfo Name Segment Bus Device Function Slot NumaNode PcieLinkSpeed PcieLinkWidth Version ---- ------- --- ------ -------- ---- -------- ------------- ------------- ------- Ethernet 3 0 5 0 0 2.5 GT/s 1 1.1 Ethernet 0 0 31 6 Unknown PS C:\Windows\system32> Get-SmbClientConfiguration | Select EnableMultichannel EnableMultichannel ------------------ True PS C:\Windows\system32> Get-SmbClientNetworkInterface Interface Index RSS Capable RDMA Capable Speed IpAddresses Friendly Name --------------- ----------- ------------ ----- ----------- ------------- 5 False False 1 Gbps {192.168.1.10} Ethernet 2 True False 1 Gbps {192.168.2.10} Ethernet 3 6 False False 100 Kbps {fe80::ffff:ffff:fffe} Teredo Tunneling Pseudo-Interface PS C:\Windows\system32> Get-SmbMultichannelConnection PS C:\Windows\system32> Get-SmbMultichannelConnection -IncludeNotSelected PS C:\Windows\system32> Get-SmbConnection PS C:\Windows\system32> Get-SmbConnection ServerName ShareName UserName Credential Dialect NumOpens ---------- --------- -------- ---------- ------- -------- SERVER plex ASUS-PC\ASUS ASUS-PC\ASUS 3.1.1 2 PS C:\Windows\system32> Get-SmbMultichannelConnection -IncludeNotSelected PS C:\Windows\system32> Get-SmbMultichannelConnection -IncludeNotSelected PS C:\Windows\system32> Get-SmbMultichannelConnection Also done some tests on windows to check SMB config and connection and see the intel adapter is not RSS capable for some reason and also when swaping with the usb NIC also says is not capable. And both should be capable of RSS. It seems on windows the multi channel doesn't start at all.
  7. Thank you for the suggestions. Added the option and still doesn't work. Here is the config I used Samba config: interfaces = 192.168.1.20/24;speed=1000000000, 192.168.2.20/24;speed=1000000000 aio read size = 1 aio write size = 1 strict locking = No use sendfile = No server multi channel support = Yes *Not sure if a ',' is required between adapters name. I tried also: interfaces = eth0;speed=1000000000, eth1;speed=1000000000 Ifconfig unraid: root@SERVER:~# ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.20 netmask 255.255.255.0 broadcast 192.168.1.255 ether xxxxxxxxxxxxxxxxx txqueuelen 1000 (Ethernet) RX packets 98026 bytes 6364240 (6.0 MiB) RX errors 0 dropped 66 overruns 0 frame 0 TX packets 180148 bytes 265543630 (253.2 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.2.20 netmask 255.255.255.0 broadcast 0.0.0.0 ether xxxxxxxxxxxxxxxxx txqueuelen 1000 (Ethernet) RX packets 627 bytes 101446 (99.0 KiB) RX errors 0 dropped 65 overruns 0 frame 0 TX packets 171 bytes 26681 (26.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.255.255.255 loop txqueuelen 1 (Local Loopback) RX packets 2 bytes 140 (140.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 2 bytes 140 (140.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 ipconfig windows 10: Ethernet adapter Ethernet: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) Ethernet Connection (2) I219-V Physical Address. . . . . . . . . : xxxxxxxxxxxxxxxxxxxxxxxx DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.10(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : sâmbătă, 25 noiembrie 2017 13:02:08 Lease Expires . . . . . . . . . . : marți, 1 ianuarie 2154 19:43:03 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Ethernet 3: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : xxxxxxxxxxxxxxxxxxxx DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.2.10(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : NetBIOS over Tcpip. . . . . . . . : Enabled
  8. Still doesn't work. I tried binding the IPs and also the interfaces.
  9. Yes. I tried multiple restarts and service restarts and reapply the settings also swapping NICs. Use express settings where ? Connecting 1 wire to both sides gets 1gbit ( 112MB/s ), but that isn't the point. I don't see activity on both adapters when transferring.
  10. Hello forum. In short I want to achieve 2gbit transfer speed between my uRaid server and my Windows 10 workstation. I have my Windows 10 workstation with specs: Intel i7-6700k Asus Maximus Hero VIII 2x8GB Ram 1x Samsung 850 evo 1x 2TB Seagate sv35 Lan1: Integrated intel 219-v 1gbit Lan2: Realtek USB GBE 1gbit And my unRaid NAS with the following specs Intel i3-4160 Asrock B85 Pro3 2x4Gb ram 1x 2TB Seagate sv35 and other HDDs Lan1: Integrated Realtek 1gbit Lan2: PCI-E Realtek 1gbit I have my switch d-link DGS-1100-08 and router TP-Link Archer C7 I have researching these week a lot regarding this topic and the final answer tend to No. But i will show the options I find Link aggregation, NIC bounding and samba multi channel. I tried multiple combination of OS and methods. On the unRaid I setup bounding and set it to balance-rr - the only mode that can split a tcp connection. Between 2 unraid boxed and switch setup to link aggregation I achieved ~200MB/s (NICs in any combination) Transferring from unraid Box to Windows Server 2016 with balance-rr oin unraid and static teaming on windows i achieve ~200MB/s dl and ~100MB/s upl . Don't know why but it seems windows doesn't split traffic but i saw in the switch the traffic goes on both NIC to unraid. Windows 10 doesn't support NIC Bounding . I see NIC bounding doesn't work windows 10 - linux . The only Requirement is that my workstation to be Windows 10. The Server can run on windows or unraid. I tested samba multi channel and between Windows 10 - Windows Server 2016 I got the multi channel to work out of the box almost( worked only when pairing intel NIC with the USB NIC and on other pc the two realtek, swaping the usb with the PCI-E card didn't work with multi channel). Achived ~200MB/s. That is fine with me but WIndows server works very slow and i see decreased in speed and lag when using it. I tested unraid with all its features and it is what i want due the multiple options, easy samba share, docker, wm and many useful plugins and also very good performance. I rather prefer Unraid The main problem I can't get samba multi channel to work. I enabled it in config and checked if the version of unraid haves samba version that haves multi channel. Swapped the NICs and still doesn't work. Can someone suggest what i need to tweak or what can be the problem?. unRAIDServer-6.3.5 having samba: 4.5.10 (CVE-2017-7494) Settings added in samba: server multi channel support = yes aio read size = 1 aio write size = 1
  11. Does anyone tried this ? I'm asking because on asus website it says max digital resolution 4k (without any explications) and on nvidia site it says Maximum Digital Resolution 5120x3200 with *(at 60Hz with dual DisplayPort connectors). If you run extended display(4k + 1080p) the maximum resolution increases beyond the maximum value stated above. Can anyone confirm it actually works ?
  12. Isn't easier to setup your home PC as and torrent server(eg setup, remote desktop or team viewer ) and then trasfer the files throw encrypted ftp or stream using vlc+https ? You can also setup and vpn server using openvpn and connect your laptop using openvpn client with the generated keys. I done this but on linux. But I believe if the university router will block any pass-throw vpn.
  13. I have an ASUS GTX 970 STRIX OC GPU and now i'm running an BenQ 1680 x 1050 resolution throw DVI-D. I was wondering if support connecting a 4k SmartTV to hdmi as an extend display to the monitor? short: Does gtx 970 supports dual display 1080p + 4k?
  14. I have a GTX 970 in one rig and a Geforce 9600 GT in other and one needs an upgrade.
×