rans

8 minutes ago, minibois said:

This drive probably has some RAM on it, that runs out at some point, which is when you will see the lower performance.

Or it's because it's more full than it was before

I assume this is one large file? Because if it's a ton of small files, I recommend packing them in a .zip and then copying it over. Copying a whole bunch of tiny files usually take a lot longer, than all in one large(r) file.

this is just a folder with 1 mp4 and 1 jpg file.. a 2gb mp4 file.. back then i don't have this issue. i even tried plugging the flashdrive directly to the motherboard... 

this is a sandisk 3.0 32gb flash drive. I don't remember having the issue back. it just suddenly happen. even just 2gb takes about 10mins to copy. what could be the problem? it does not happen before.. thanks

alright thank you for helping 

2 minutes ago, Sauron said:

Looks like for some reason your graphics card doesn't support your TV very well try updating or reinstalling your driver.

 

What gpu is this by the way?

I've just updated it before posting it here. 
its rx 5700xt Driver version 20.2.2

sux cant watch 1080 movies anymore lol

2 minutes ago, Sauron said:

Try going to Display Settings> Advanced Display Settings > Display adapter properties for Display 1>List All Modes and check if you can see a 1920x1080 resolution there

Hello, 
Yes i can see 3 1080p


But when i try each of them it just result a black screen with (no signal) hdmi message

Also another note if i just entered a Progressive presentation even a 1920x1080. it will accept but when i try to change to that resolution the tv won't show anything. just a black screen.

1 minute ago, Sauron said:

Then I'm guessing the timing settings are incorrect for your TV. To be honest it's weird that it's not being detected as a 1080i display from the start... can't you select 1920x1080 in Windows' display settings?

With this card no.


but before i upgrade from (gtx 1050 ti) i have the 1920x1080p option here in windows display setting

Just now, Noah0302 said:

My TV support 1440p 120hz, but if I try to set it in the AMD drivers it wont work.

 

I have to do it through Windows for whatever reason.

The windows won't detect 1080p. It only detect the 768p.
but before (i have nvidia card) i can switch to 1080p from windows display setting.

2 minutes ago, Sauron said:

Are you sure it's a 60Hz tv?

it says from here it can support 60hz.

but i already tried lowering the refresh rate to 50, even 30. but when i click Okay. it still says the custom resolution settings are not compatible

Hello, my TV can support 1080i (interlaced) only but i can't seem to find the right configuration in the radeon software. here is my setting

Even if i try other Timing Standard i get this message


Can anyone please help me? Thanks

On 3/4/2020 at 8:48 PM, iCypticx said:

so are you trying to achieve the 1280x768 correct? would 1280x720 still be viable for your needs?

im trying to achieve 1920x1080 on my tv. but with my current setting in radeon software i can only go for 1280x768.

20 hours ago, iCypticx said:

hmm, what refresh rate does your monitor run at? it should be on the box or you can search it up using the name

 

Hello. Its 60hz. But doesnt work. Even trying to lower the refresh rate. Still says not compatible.

8 minutes ago, iCypticx said:

okay well, what gpu are you running? and can you send a picture of what it looks like when you try and insert a custom resolution to the amd radeon software

Hello,
This is the default config when i try to click the "create new custom resolution" button.

Just now, iCypticx said:

you're using a TV instead of a Monitor?

No. Its just good to watch movie on larger screen. And my tv isnt smart tv. It just have hdmi port on it...

Hello,

So i recently change system to amd + radeon from intel + nvidia.

Before, i have a television which has native 720p but can support 1080i 

In nvidia i can easily use this higher resolution with single click no problem at all.

After changing to radeon. Im having difficulty creating the custom resolution because the radeon software is asking many options that i dont know. And if i try to use default and set only the resolution, it wont accept... 

My gpu is.

Rx5700xt

Hello, can anybody please help me with this? 
1)  problem is the music sync not being accurate. there is like a huge delay (about 3s).

2) the Memory (corsair rgb pro) is detected but when trying to change rgb settings from rgb fusion. nothing happens. This only happened after i install the ICUE software.. is this normal??

i've already tried reinstalling the rgb fusion sync 2.0. but still the same issues.
thanks!

Motherboard: b450 aorus pro

Is there a noticeable performance difference using a cheap case fan vs a higher price. Ex. Corsair ll120?

Aside from the rgb and noise. Is there a difference when it comes to blowing/cooling air? Thanks!

Hello, how can i turn back this volume ui to original windows 10 style?
I'm not so sure how this happened but its now looking like windows 7 style.

Even if i plug a audio jack. it still like this. and it takes so many steps before i can change the audio output.

thanks!

29 minutes ago, Princess Luna said:

Actually yeah... you could buy a B450 Tomahawk which is pretty much as good as any decent X570 and then upgrade your PSU to something newer.

 

Please refer to the Tier List in order to buy a good PSU.

 

thanks. what do you think of aorus b450 pro? I kinda want to stay away from msi  had a bad experience with msi motherboards not just 1 board but 3.  

https://docs.google.com/spreadsheets/d/1d9_E3h8bLp-TXr-0zTJFqqVxdCR9daIVNyMatydkpFA/edit#gid=611478281 

I found this googlesheet but i don't actually understand the 

okay guys thanks for the replies. but its kinda split answers. I've read a review online that my current psu is outdated. but does this means its not SAFE to use it with 3700x? 
I might just use b450 board and buy a new PSU if its not recommended to use my current psu.

Hello, i currently have the MI12 seasonic 620w. and looking to upgrade my system.
here is the plan upgrade:
CPU: Ryzen 7 3700x
Motherboard: Gigabyte X570 AORUS Pro Wifi
Memory: 32gb ddr4 3200 Corsair Vengeance
GPU: Aorus RX 5700XT Windforce OC
(currently have)Storage: 2 Hard drive, 1 Sata SSD, 1 Nvme m.2

Do i still need to upgrade my power supply? or its enough. i might do some minor overclocking.. 
Thanks!

My keyboard is automatically pressing F12. but stop when i press other key. and then it will resume to automatically typing after a few seconds. 
when i press F12. the keyboard backlight isnt working. but it will glow when the spamming resumes.

can anyone please help me what to do? im having trouble finding a replacement here in my place.. im using ubuntu, tried to disable it with xmapmod. but its still typing F12 even after being disabled. already tried reinstalling ubuntu. and also tried using windows 10. 

25 minutes ago, alatron978 said:

Try stress testing memory.

Hi there, 
I've just finish stress testing it with memtest64 for 9loops. But it did not freeze.

Hi,
Can anybody please help me what to do? my computer just start to freeze randomly while browsing the internet. Actually its not really freeze but the frame rate drops to like 1fps and the sound stutters until it freeze. sometimes it can recover but most of the time computer will just automatically restart.
I've tried to reinstall a fresh windows 10 and then stress test both my gpu and cpu, but i can't still find where the problem is. 

My PC:
CPU: g4560
GPU: Gtx 1050 TI
RAM: 16GB ddr4
Motherboard: Asrock Fatal1ty h170

Thanks in Advance!

1 minute ago, GoldenLag said:

3600mhz cl16.

 

Tho you really do not have to get 3600mhz. 

 

3200mhz is fine

theres no available 3200mhz 14cl here in my place