Jump to content

roasted pinnaple

Member
  • Posts

    55
  • Joined

  • Last visited

Everything posted by roasted pinnaple

  1. Honestly I don't know if i should post here or in the cooling forum but my problem is pretty simple so hopefully you guys could help me out. long story short im building a new rig and happen to have an old aio lying around, I know these things aren't exactly meant to last or whatever but the thing is I haven't used it in about 2ish years now and presumably there's only water in it so i doubt there's any algae growth and it hasn't gotten hot enough to evaporate. So, I'm wondering if I can use it in the new rig or if I should replace it? New cpu: ryzen 5 5600x Old cooler: corsair h100i gtx
  2. ok so this is gonna be a bit of a long one but ill try to shorten it as much as possible. for a long time my computer was working fine great even but then I accidentally installed a bad stick of ram and that killed it i obviously pulled the bad stick out but to no avail. After that i started troubleshooting the rest of the memory starting with pulling out all but one stick and cycling it through each dimm slot and then repeating the process for each known good module being sure to use the memok function on my motherboard on each configuration but still nothing worked/ the post code is 53 which means memory initialization error but the interesting thing is even with no ram installed its the same code when in that case it should be 55 this started to lead me to believe it was possibly the motherboard or even the cpu causing the issue so i cleared the CMOS which didn't work so then i reseated the cpu being sure to check all contact pins and pads and even though they were fine this still didn't fix anything system info: CPU: intel 5930k mobo: asus rampage v extreme memory: 16gb corsair vengeance lpx 2666 GPU: 980 ti PSU: corsair ax1200i I am completely out of ideas here so any help would be appreciated
  3. hi I do a lot of cad in my free time and I have a pretty good pc for that but my laptop is a really old macbook pro and cant cad at all so I was hoping for some recommendations?
  4. no I built this system a while ago so I probably tossed it
  5. does this mean I would have to purchase windows again and completely start over?
  6. I have everything important backed up to the the cloud so I dont really care if i lose any data on the drive. but the problem is I cant reset windows because I cant use the computer for more than 30 seconds at a time before it crashes
  7. I recently had a power outage in my area while my pc was running and although its on multiple surge protectors every time I use my computer it crashing a couple seconds after logging in so im pretty sure windows is corrupt and I cant do anything to fix the problem
  8. Hello I need a 3d printer for Christmas Here are some of my requirements: 1. affordable (my ABSOLUTE MAX BUDGET is $425 USD) 2. it must be able to ship to the US 3. prebuilt. I dont want to have to deal with the hassle of building it and putting it together 4. user friendly I want minimal problems it just works 5, my minimum print space is around 6 x 6 x 6 inches nothing smaller that will be all
  9. Thats actually a really nice board I had it before I upgraded to x99 But the features dunepilot said would be really nice
  10. h440 is s great case and pretty quiet to. the s340 is a budget case and the h440 is just a little more premium
  11. on a budget i would go for a fractal define s if not on a budget just get anything by caselabs
  12. https://pcpartpicker.com/parts/partlist/ any critique?
  13. i have the g4 and it runs fine (with minor hiccups) i would try going to wherever you got it and ask for a new one
  14. oh sorry i have an nzxt phantom 410 yet i plan on switching to the phanteks enthoo luxe and i have a swifttech h240x and i plan to add a thick single rad in the back so i can add my GPUs
  15. 5960x(watercooled) gtx 980ti 16 gb ram
  16. I know there are some AIO's that would allow me to add the gpu into the loop like the swifttech h220x but would the h100i gtx be able to handle 2 cards and a single rad or so
  17. I am currently building a very high end pc so I need high end fans. witch are the best? (high static pressure is preferred)
  18. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ pretty much what it says up there note that it should be simple and easy to use but with great functionality
×