Jump to content

CALBIX

Member
 View Profile  See their activity

  • Posts

    310

  • Joined

  • Last visited

 Content Type 

Everything posted by CALBIX

  1. CALBIX
    Found a fix. Use your RGB app of choice and set each RGB value to 0, hit apply and it should be turned off. I used mystic light from msi.
  2. CALBIX
    Just upgraded my pc to ryzen and need some help with Crucial Ballistix tactical tracer ram staying lit when the pc is switched off. Specs: R7 2700x 16GB Crucial Ballistix Tactical Tracer Ram MSI B450 Tomahawk mobo Thanks!
  3. CALBIX
    Seems like the LG is the better deal
  4. CALBIX
    Hi everyone I want to upgrade my display as I have a 1080p 60hz monitor. these are the three options I have: Asus VG248QE: https://www.amazon.com/VG248QE-1920x1080-144Hz-Gaming-Monitor/dp/B00B2HH7G0 Dell S2419HGF: https://www.amazon.com/Dell-Gaming-Monitor-response-FreeSync/dp/B07MB7WT39 LG 24GM79G: https://www.amazon.com/LG-24GM79G-B-24-Inch-Monitor-Reduction/dp/B06XFGTGC4 I am on a tight budget as these are the only 3 monitors I can choose Thanks!
  5. CALBIX
    I have this issue where if I try to run in Dual channel mode but my mobo keeps giving an error on post then shuts down and the process repeats
  6. CALBIX
    I have 2 sticks of 8GB in my pc. CPU Z shows that my ram is in single channel mode. Will dual channel give me any performance boosts?
  7. CALBIX
    Got the Mobo running. Gonna let it run for a few hours just to make sure everything is good before I switch. Thanks for all the help
  8. CALBIX
    Msi z97 Gaming 7
  9. CALBIX
    So the board will turn on? If the board turns on that's all I need to know
  10. CALBIX
    So the board will show post numbers?
  11. CALBIX
    Hi everyone A few weeks back my corsair cooler blew inside my case spewing liquid over everything. So I cleaned the motherboard and it worked fine for about 2 days after everything happend but I went to buy myself a new cooler. As soon as I went to install a new cooler and switched my pc back on nothing worked. The motherboard showed that there was power. After about 3 weeks I would like to test the mobo but I don't want to disassemble my pc just to check. Thanks
  12. CALBIX
    Thanks alot. Cpuz picked up the wrong sensor!
  13. CALBIX
    The Voltage on my old board was 1.2V when at 4.6 GHz. This Mobo just bumps it up to 1.7 at stock speeds.
  14. CALBIX
    So I had to get a new motherboard due to my corsair cooler bursting inside of my case and the motherboard just dying after working 24h after that. I got a MSI H81M-E33 and paired it with my 4790K cpu which was in the old mobo. The Voltage is currently sitting at 1.792V in CPU-Z and there is no way to change this in the BIOS nor in Command Center. Thanks!
  15. CALBIX
    I see Corsair released a CUE 2 update that includes a "Button Response Optimization" maby that will solve it for you?
  16. CALBIX
    Got the Glaive in november. I have had no issues since then!
  17. CALBIX
    Ok thanks for the info
  18. CALBIX
    Thats a good idea yes. Can the contacts move inside the switches?
  19. CALBIX
    Hate it when people say do not buy razer but cant recommend a good keyboard. If you WANT cherry mx then go with Corsair K65,K70,K95 range of keyboards Razer has their own range of mech switches in the Blackwidow range
  20. CALBIX
    How strong are Cherry Mx switches? I owned a K70 with red switches and it started giving me problems after a year. I think the cause of this was I traveled alot with the keyboard and the rattles and setting the keyboard hard down on the table. I own a K65 rapidfire now and love it but im really scared it will suffer the same fate.
  21. CALBIX
    So they are taking the pc to the place they bought the parts at. Thanks for the help
  22. CALBIX
    Ok let me check
  23. CALBIX
    Do you maby know which series the fx 6300 is?
  24. CALBIX
    I am quickly sorting him out, I will make sure he installs the correct drivers
  25. CALBIX
    New hard drive installed, giving the same issues
×