thericeshield

Great giveaway

Asus is at it again.

I have this one http://www.frozencpu.com/products/17572/ex-pmp-216/EK_D5_X-RES_Top_140_-_Acetal_-_Laing_D5_Swiftech_MCP655-B655655-PWM.html and it works great.

Are you talking about the AP141's? If so Im not really a fan of the blue colored fan blades.

Im looking for some quiet 140mm radiator fans. I'm thinking about the Bitfenix spectre pro fans or the Swiftech helix fans but Im not sure how well they would perform. I dont want to spend more than $20 on them and dont bother mentioning noctua fans because I'm only looking for fans that are either black or white. Also Im using the fans on an EK XTC 420mm radiator.

Thanks for the replies, it looks like I'll be going clockwise

So Im finally getting my loop together and was wondering if I should have the water flow towards the cpu from the pump or to the pump from the cpu. Heres a diagram of my loop

I did the same thing on my last build but I used two sided foam mounting tape.

Im just wondering why it would leak, I thought that since the tubing has a smaller inner diameter there would be a tighter fit on the compression.

I was wondering, could you use 3/8id 5/8od tubing on 7/16id 5/8od compression fittings? I assume that the tubing would be able to stretch over the barb part of the compression fitting but would the screw on part still be able to go over the tube?

Alright

So I like how the new xspc razor block looks, so it should do a good job of cooling all the components on the block?

Im overclocking my 680 and am looking to get a waterblock that will do a great job of cooling it. What blocks do you guys recommend?

80 plus titanium? Did that just recently come out?

theres a overclock3d where a guy paint this exact motherboards heatsinks white. http://forum.overclock3d.net/showthread.php?t=46321&page=2