Jules A

Just ran realbench overnight for 8 hours and didn't crash, 4.5Ghz at 1.375v Gonna try a few more combinations

I've tried realbench but only for like 15 mins and everything was fine, also tried Cinebench r15 a couple of times and those were fine too

Hi, I OC'd my CPU, which is an i5 6600k, and ran prime95 to stress and it game this error. Running 4.5GHz at 1.375v. Any idea whats going on?

I tried running prime95 but always get a hardware failure, so i switch to realbench to make sure its not the CPU

I just OC'd my CPU and while running a stress test the temp seems to increase a bit too much (almost 90). Using ASUS Realbench to stress the CPU and about 10 mins of stressing the temp reach that high. I have the Corsair Hydro Series™ H75 Performance Liquid CPU Cooler with an i5 6600k OC to 4.5GHz. The fans connected to the radiator is running but temps seem a bit off. Edit: CPU running at 4.5GHz at 1.4V

How do i do that? What does that mean?

Just found out the ram are different speed, 4GB sticks being 2133 while 8GB sticks being 2400.

Manual only has recommended for 1,2 and 4 ram sticks, no 3 unfortunately

Yup exactly the same ram just different sizes

So the 4GB sticks in slot 1&3 while the 8GB in either 2 or 4?

What sup guys My pc has 2x4gb 2400MHz ram and I decided to buy another stick of 8gb ram of the same make. I put the 8gb stick in slot 1 and the 4gb sticks in slot 3 and 4 and windows is showing 16gb ram but only 7gb usable. Is this right or should I move the ram to different slots. Mobo: Asus b150m Pro gaming Ram: Corsair vengence lpx 2400mhz

I went to BOIS to change the boot order and it does show up. Made the 970 as 1st and the 750 and secondary. I might have installed windows on the 750 because the windows installer said disk 1,2 or 3 so not sure which is which.

One more thing, On task manager the disk is there

Hello, I recently just installed a new M.2 SSD into my PC. I reinstalled windows onto the m.2 (I think) and not it doesnt show up. The 750 Evo i have still shows up but 970 Evo doesn't. At the start when I tried to install windows on the 970 the but got an error saying "We couldn't install windows in the location your choose", and after some googling I saw a reddit post and did what they said. Boot up with Windows installation media (USB/DVD) On the first screen. Press SHIFT + F10 and type the following: diskpart select disk 0 clean exit exit Then afterwards it can install and how I have this problem. Both the ssd seems to be using the same bus number 0 while my hhd is using bus number 1. :((((

Will do that later, the fan on the hydro is right above that so not sure if that would cause it to over heat

This is what I got after closing everything

CPU is running at 3600MHz most of the time, and its already at high performance in power options for both nvidia and windows What do you mean by the system idle process

Hello, My PC seems to be performing way below expectations, mostly the CPU. I used MSI Afterburner to check load and temps of CPU and everything seems fine. On every game my CPU would be running at 100% load consistently with normal temps; I would get roughly 150~ fps on CSGO (Playing on 1152x768 with mixed settings) on average with 50~fps on battlefield 1 (Similar FPS on all settings). I would get about 20% load on idle on my pc with a few things running in the background like wallpaper engine, spotify, steam, corsair engine, discord and bit defender. I did a benchmark on userbenchmark.com and it shows in the picture. A friend recommended me to do a bios reset but wanted to check before that. SPECS: Gigabyte GTX 1070 G1 8GB Corsair H75 Liquid CPU Cooler 700W Aerocool Integrator 80+ Power Supply Asus B150M Pro Gaming Micro ATX HDD, SSD, CPU in the picture

The bois says mobo temp is 30, but something that concerns me is that the when I optimise the Q-fan setting, the cpu it says the cpu fan should be at 100% at all temp while chassie should be very low.

This is what I got on HWInfo https://gyazo.com/42cf3255f69d93a97e7c83d9e66e6bab

I'm not sure but according to speccy it's at 118°C

Not oc'ed https://gyazo.com/b5bb9994565497eb37ecce3eef70f45c

Hi, my motherboard is running at 118°C and I think that kinda high. Is it concerning? Cpu is water cooled and running at 28°C All my hdd/ssd is about 30°C Gpu at 50°C. All the fan in the case is running but the room is a bit warm and case is slightly dusty. i put my hand in the case and its roughly the same temp as the room. Any help, cheers

I did DDU and reinstall and that helped a bit not fully

I did a reset a few weeks back Is this just for gpu drivers?