nuyy

Yes, the Antec p190 has two PSU. Antec NeoLink PSU 650P+550S and I do have both in my system, but the 550S is the only one with the modular for the Molex and Sata cables that I am missing.

If I understand. I would be able to use a voltmeter using the black probe on the 24 pin ground while using the red probe on the 6 pin to work out what each of the 6 pins are?

Hello I have a older Antec 550S psu (discontinued) that I use and I am missing the modular cables for it. I would like to get replacment cables but I know you can't mix and match with out first knowing the psu pin lay out for ground, 12v and 5v. I have a multimeter How would I go about finding what pin would be ground to start testing the pin layout?

Hello I have a older computer I use for playing older games and I am having a strange flicking issue with the 9800 GTX+ here is a short video of the issue in need for speed underground 2. I have only tried the card on two games, NFS2 and Oblivion (Oblivion was fine) I also tried running a few benchmarks playing on a loop and have no issues. I ran Tropics 2008, 3DMark06 and 3DMark Vantage. I have used DDU to uninstall drivers and used even tried a clean install of windows to make sure. When I remove the 9800GTX+ and put in my 9600GT reinstall the driver the need for speed underground 2 does not have the flicking issue. but removing the 9600GT and putting the 9800GTX+ in the issue returns but again it is fine in Oblivion, Tropics 2008, 3DMark06 and 3DMark. The Card is also not overheating and I have applied new thermal paste (MX4) and new thermal pads. Motherboard: EVGA nForce 680i SLI CPU: Intel E8300 Graphics card PNY 9800 GTX+ 512mb PSU: EVGA 600W BR 80+ bronze (50A 600W +12v)

Alright, Thanks everyone. will use the TX550M just wanted to check and make sure first.

Thanks I just had a other question. My graphics card is a ASUS NVIDIA GeForce RTX 2070 SUPER 8GB ROG STRIX OC Turing Graphics Card this card uses 2x8 pins my power supply does come with a single power cable that is 8 pin to the PSU and slits into two 8 pins is this fine for the GPU? or does it need two single cables to the PSU? my 550W psu is rated at 516W on the +12v rail.

Hello I have a 550W Corsair TX550M it is a 80+ gold rated psu. It's a new build with a i5 10600k and 2060 Super I had to RMA the 2060 super and due to stock it's being replaced with a 2070 Super will this be ok with 550W? card is listed as a recommended 650W. pcpartpicker says that the estimated wattage is 459W. CPU: i5 10600k Cooler: be quiet Dark Rock 4 GPU: Asus Rog RTX 2070 Super Motherboard: ASUS ROG STRIX B460-H GAMING Ram: 16GB (2x8GB) Corsair Vengeance RGB PRO Black - 2666MHz SSD: 512GB Intel 660p nvme. HDD 2TB WD blue Case: Corsair Carbide 275R

Hello I have a MSI GE70 17.3 Inch. I am looking to buy a backpack to carry it around in but also keep it safe, I am looking to spend around 50 gbp, I was thinking of buying the Case Logic Backpack http://www.ebay.co.uk/itm/Case-Logic-Backpack-for-17-3-inch-Laptop-/291112115033?pt=LH_DefaultDomain_3&hash=item43c7a25b59 Was just checking to see if anyone knew of any better bags before I jump into it. Thanks