Valkyrie Lenneth

win11 and yes immediatly fixed it for me i did bios update > issues stutter and crash, downgraded and everything stable again ( ran prime 16hours already valid after that )

i have no stability issues with 4sticks at all and im running 3600cl14 sticks ( very tight set ) i dont think its related to ram sticks at all its just the bios ver

ive had nothing but issues on the new bios, i had to revert back due to crashing and bsods, the issue is with the new bios, im on a x570-e gaming board that new bios is unstable as hell for me i think the new Update AMD AM4 AGESA V2 PI 1.2.0.7. is the cause of it

100% this he have old bios for sure

just get a 450watt psu thats good, at low wattage it wont make too much of a difference 50% / 80% is when it is giving the best efficiency, usually basicly just get the SeaSonic Prime Fanless PX-450

depends on ur bios but with my board its at monitoring > fan control, in this case it isnt a fan u want to control though but the pump ( the pwm the pump is connected to )

u probably have ur pump speed set low, make sure the pump running at full blast and see again then if its connected to cpu fan just set cpu 100%

this is next ( srs wht is this topic )

it is no issue to combine graphic cards but im pretty sure that chrome/discord go through the main graphic card aka gpu 1, theres no compilation with drivers really too since its amd and nvidia, theres a chance if u have a monitor connected to the 1030gt that stuff u run on there will go through the 1030gt ( dual monitor setup ), i wouldnt worry about outputting on the same gpu as gaming card though, i have a 2080ti outputting 4k 120hz and 1080p 144hz at the same time without issues or fps loss, and im using a displayport to hdmi 2.1 adapter, short said i would just run with 1gpu unless u have specific bugs with a 2nd monitor then the 1030gt can help with 2nd monitor

it doesnt matter its more to see if the system post so u dont need to troubleshoot with everything inside the case, u could literally do a post test without a mouse and keyboard too x) but it will say no keyboard connected probably

push pull on both rads and a graphite 780t, it does not change even with a full open case ( closed case or open case not really different ) top rad is exhaust in pushpull, front rad is intake pushpull, also i run everything at full blast, i dont mind sound i just want performance

honestly dlss is more for 4k, if u game at 1080p u really dont want to enable dlss, raytracing if u like it i guess why not i dont recommend the TUF card coz of card sag( its the worst on tuf card )

if u are willing to go for a larger case i can recommend the asus x570-e gaming, not the -f coz that one has less vrm

cheap option, scythe fuma 2 ( if it fits the case ofc ) more expensive option > noctua nh-d15 ( also needs to fit the case ) they are bulky but decent

i mean a front panel fan controller, example most of them have temperature sensor connectors on it ( and include temp probes ) u can just plug ur water temp probe/watertemp reader onto that make sure to get one with temperature sensors that way u can just connect the watertemp sensor onto it

we need a budget to honestly give good advice + more details of current specs

i cant find it in the manual that it has a temp sensor connector, so probably not, however u can simply just get a fancontroller and connect ur watertemp meter onto the fancontroller for temp readings

hi, ive created a custom loop with a 5900x and a 2080 ti, i have 1 360mm rad 45mm thick and 1 280mm rad 45mm thick, when i had the loop without the gpu the cpu was only 55-57*C while gaming and when i added the gpu it is 65-70*C ish while gaming, is this normal eventhough i have dual rad ( with decent thickness ), im using all parts from EKWB and i have D5 pump running at max speed, flow is going very fast every 2-4seconds a full loop done my order is res > gpu > cpu > 360 > 280 > res im unsure if its supposed to add a good 10-12*C on the cpu by adding a gpu into the loop also i am using a quite small reservoir, by using a larger reservoir would i get better performance due to there beeing more liquid inside? my liquid temp before gpu i do not know but the rads didnt even get warm and now they do, but with the gpu its 45*C PEAK with Prime95 + MSI Kombustor pulling 220watt from the cpu and 330-340w from the gpu both are oc if it can help by changing loop order to res > gpu > 360 > cpu > 280 > res , i might try it but id rather not change my loop... only if its really going to help both rads are in Push+Pull

cpu needs a minimum of 4pin to run, if u dont plug 4-8pin connector it wont boot make sure when connecting that u do not insert the pcie connector into the motherboard, make sure it is the eatx pin and not pcie

disable dx12 mode

u need nasa computer to play poor optimized games properly

prolly is in the mouse then

then search for laptop model nr and download chipset drivers on manufacturer site

u need to look what motherboard u got and go to the mobos download page n download chipset drivers

just plug the thing in and try chipset driver, it doesnt matter if its connected or not but it can solve problems usb related using diff chipset driver