Uehm

Yup tried it and it didn't change abything. It has been working the past week without itbeing detected, dunno what happened now.

Will msi still accept it seeing as I've had this mobo for about 2 years nkw? I also can't go a month without a pc.

D: drive is just my random crap drive, my c drive is my ssd. I'll try resetting it.

Hello all, I have a predicament. For the past week or so my D drive has not been able to be detected. I have had this drive for about two years now. It is a WD green 1.5tb drive. It is plugged in and was working until it randomly decided not to. I am also having issues with my ethernet. For some reason whenever I boot up my pc, it doesn't work. I have to right click the Ethernet icon in the taskbar and select troubleshoot problems. It takes about 2 minutes and ultimately resets the Internet drjver. Now, I could live with these problems until the one I have now. I just got home from work and when I went to boot up my pc, it stuck itself into a boot loop (?). Here is a quick video showing tbis: It has been like this for the past 20-30 minutes with no end in sight. I have tried rebooting, i have tried pressing to go to the bios setup, which it is not letting me do. Any help at all at this point would be appreciated. Thank you.

Does anyone know where I would go about getting a wood case for my pok3r? I've seen the massdrop (ugh) and would rather not wait 5 years in order to get it.

I love my hp envy 5530. It's fairly cheap @ $90. I don't think ink is too expensive but then again I'm on the HP instant ink program so I wouldn't know. Definitely recommend joining that though. For $10 a month (which I would recommend for you since you say you print a lot) you get to print 300 pages a month. Each additional set of 25 pages is $1 each. Check it out here: https://instantink.hpconnected.com

Nope, was using the HDMI port and was using it with the other monitor that was working.

Yeah so I don't really know what's going on at this point. I disconnected the other ones, nothing. However, when I started it up, I could still interact with the monitor, so it was physically....there. I also replaced the cable with just the HDMI cable and that doesn't seem to be working. If the monitor was dead, then why would it technically still be there? Wouldn't it not show in the screen res page as well as CCC?

Hello all again, Ran into another issue from my last thread. I have now purchased an active HDMI -> MDP adapter. I no longer get a "no signal detected" message. What I do get is a black screen on the third monitor. I am no longer getting the "change display settings to save" message either. Screen resolution page: I can drag things into the monitor, though I can't actually see them. I have tried switching power sources (previously in a power bank thingy, now plugged into the wall) to no avail. Here is what I am doing: Monitor One: (not working): HDMI in monitor, active HDMI -> MDP adapter plugged into GPU. Monitor Two: (working): HDMI in monitor, passive MDP into GPU Monitor Three: (working): HDMI in monitor, HDMI into GPU Hopefully one of you are able to help, I want to finally use my third monitor. Thanks.

Darn. By the way, happy 10,000 posts!

So would this work? http://www.amazon.com/gofanco%C2%AE-DisplayPort-Converter-UltraHD-Display/dp/B00OSCPCHW/ref=sr_1_5?s=electronics&ie=UTF8&qid=1434070898&sr=1-5&keywords=mini+displayport+active+to+hdmi I would run an HDMI cable from my third monitor and then plug it into the MDP on my GPU.

I would like to murder AMD. God damnit. So I guess I gotta buy another displayport cable. Wew....

Hi, It is the third one, which is using DVI, yes. The cable seems to be working fine, when a cable is dead I got a "cable not detected" message. So it shouldn't be that. The HDMI to DP monitor is working fine, so I don't think I need an active adapter.

Must be relating to the output, I'm getting a "signal not detected" now. Let me try switching them.

Yes. However, it's automatically on 'Disconnect this display.' When I click 'extend this display', it says "the display settings could not be saved. Please try a different combination of display settings."

Hey all, Just recently upgraded to three monitors. Running into a problem however, where my third monitor isn't being detected. I am using a 7870, and three BenQ 27" monitors (GL2760H). Monitor one, I am using HDMI, and plugging it into the HDMI port on my GPU. Monitor two, I am using an HDMI to DisplayPort adapter, and plugging it into the Displayport port on my GPU. Monitor three (arrived today), I am using DVI, and plugging it into the DVI port on my GPU. The cable isn't faulty, I do not receive a "cable not detected" message rather a "signal not detected" message. I have heard that you need the third monitor to be a DP with AMD GPU's which I do, my GPU has no VGA inputers. I have also tried recycling the monitor's power while the computer is on to no avail. Thank you.

Nope, that didn't fix it either.

Nope, only heard it when I had my headset on.

Okay so I've been playing some games the past few hours. I've had no beeps..so it isn't a memory or temperature issue. Anyone know of anything else that could help?

But I'm not getting when POST'ing...it's weird.

RAM is the G.Skill Sniper Series 16GB set.

PSU is the Corsair CX750M. PCPartPicker link: https://pcpartpicker.com/part/corsair-power-supply-cx750m

Not when I boot, it's just randomly when I use my computer. I haven't even reached 100% CPU usage with this PC yet, so it shouldn't be a problem with temperatures.

Hi, I've built my PC a few days ago. All is going fine except that I'm getting random beeps every now and again. It's three random beeps. I read that it could be potentially from my motherboard telling me something is wrong, but all my fans seem to be running fine and my temperatures are fine as well. My motherboard is the MSI Z97-G45 Gaming Motherboard. Does anyone happen to know, or heard of, this issue before? Thanks, Uehm

That's basically the "trial" option. I like to try it before I buy it most of the time. I've had too many games that I've spent $20+ on and ended up playing them for like a week and that's it. I'd rather "try" it for a week, see if I'll still like it, then I'd buy it. Also, software from Adobe/Microsoft is really expensive. $500+ for Photoshop? No thank you.