-
Posts
182 -
Joined
-
Last visited
Reputation Activity
-
liveturbo24 got a reaction from Sharif in Project: Aspros
Hello everyone. First off I have to say I'm not good at writing up a build log. But I'll try.
This build is more of swaping current parts into a new case. Just wanted something different and clean. Note current setup is using a MSi Z77 Mpower with will be swap out.
There's the part list.
Case: Parvum Systems S1.0 white
CPU: i5 3570k
CPU Cooler: H100i
MOBO: Asus Maximus V Gene
Memory: Cruical Tactial Tracer 16GB @ 1866
GPU: EVGA GTX 680 FTW+ 4GB
Boot drive: Sansung 840 Pro 128GB SSD
Storage: WD VelociRaptor 600GB HDD
PSU: Corsair AX850
3 Enermax Cluster 80mm PWM fans white LED
4 Enermax Cluster 1500RPM 140mm white LED
2 Sliverstone 120mm fan filter
1 Silverstone 140mm fan filter
5 Cable clamps
2 Bitfenix SATA3(6GB/s) cables white sleeve
1 BitFenix 6pin GPU cable white sleeve
1 BitFenix 8pin GPU cable white sleeve
1 BitFenix ATX 24pin cable white sleeve
1 Bitfenix EPS 8pin cable white sleeve
1 BitFenix Internal USB2 cables white sleeve
Parvum S1.0 case needs to be put together.
Starting the build
Test boot
Wire managment, not really just zip tie and stuff it lol
Using a fan controller so I don't have to plug them into the motherboard.
Finished
With the side panel on
-
liveturbo24 got a reaction from HippY in Project: Aspros
Hello everyone. First off I have to say I'm not good at writing up a build log. But I'll try.
This build is more of swaping current parts into a new case. Just wanted something different and clean. Note current setup is using a MSi Z77 Mpower with will be swap out.
There's the part list.
Case: Parvum Systems S1.0 white
CPU: i5 3570k
CPU Cooler: H100i
MOBO: Asus Maximus V Gene
Memory: Cruical Tactial Tracer 16GB @ 1866
GPU: EVGA GTX 680 FTW+ 4GB
Boot drive: Sansung 840 Pro 128GB SSD
Storage: WD VelociRaptor 600GB HDD
PSU: Corsair AX850
3 Enermax Cluster 80mm PWM fans white LED
4 Enermax Cluster 1500RPM 140mm white LED
2 Sliverstone 120mm fan filter
1 Silverstone 140mm fan filter
5 Cable clamps
2 Bitfenix SATA3(6GB/s) cables white sleeve
1 BitFenix 6pin GPU cable white sleeve
1 BitFenix 8pin GPU cable white sleeve
1 BitFenix ATX 24pin cable white sleeve
1 Bitfenix EPS 8pin cable white sleeve
1 BitFenix Internal USB2 cables white sleeve
Parvum S1.0 case needs to be put together.
Starting the build
Test boot
Wire managment, not really just zip tie and stuff it lol
Using a fan controller so I don't have to plug them into the motherboard.
Finished
With the side panel on
-
liveturbo24 got a reaction from IDprofile in Project: Aspros
Hello everyone. First off I have to say I'm not good at writing up a build log. But I'll try.
This build is more of swaping current parts into a new case. Just wanted something different and clean. Note current setup is using a MSi Z77 Mpower with will be swap out.
There's the part list.
Case: Parvum Systems S1.0 white
CPU: i5 3570k
CPU Cooler: H100i
MOBO: Asus Maximus V Gene
Memory: Cruical Tactial Tracer 16GB @ 1866
GPU: EVGA GTX 680 FTW+ 4GB
Boot drive: Sansung 840 Pro 128GB SSD
Storage: WD VelociRaptor 600GB HDD
PSU: Corsair AX850
3 Enermax Cluster 80mm PWM fans white LED
4 Enermax Cluster 1500RPM 140mm white LED
2 Sliverstone 120mm fan filter
1 Silverstone 140mm fan filter
5 Cable clamps
2 Bitfenix SATA3(6GB/s) cables white sleeve
1 BitFenix 6pin GPU cable white sleeve
1 BitFenix 8pin GPU cable white sleeve
1 BitFenix ATX 24pin cable white sleeve
1 Bitfenix EPS 8pin cable white sleeve
1 BitFenix Internal USB2 cables white sleeve
Parvum S1.0 case needs to be put together.
Starting the build
Test boot
Wire managment, not really just zip tie and stuff it lol
Using a fan controller so I don't have to plug them into the motherboard.
Finished
With the side panel on
-
liveturbo24 got a reaction from Morlo4 in Project: Aspros
Hello everyone. First off I have to say I'm not good at writing up a build log. But I'll try.
This build is more of swaping current parts into a new case. Just wanted something different and clean. Note current setup is using a MSi Z77 Mpower with will be swap out.
There's the part list.
Case: Parvum Systems S1.0 white
CPU: i5 3570k
CPU Cooler: H100i
MOBO: Asus Maximus V Gene
Memory: Cruical Tactial Tracer 16GB @ 1866
GPU: EVGA GTX 680 FTW+ 4GB
Boot drive: Sansung 840 Pro 128GB SSD
Storage: WD VelociRaptor 600GB HDD
PSU: Corsair AX850
3 Enermax Cluster 80mm PWM fans white LED
4 Enermax Cluster 1500RPM 140mm white LED
2 Sliverstone 120mm fan filter
1 Silverstone 140mm fan filter
5 Cable clamps
2 Bitfenix SATA3(6GB/s) cables white sleeve
1 BitFenix 6pin GPU cable white sleeve
1 BitFenix 8pin GPU cable white sleeve
1 BitFenix ATX 24pin cable white sleeve
1 Bitfenix EPS 8pin cable white sleeve
1 BitFenix Internal USB2 cables white sleeve
Parvum S1.0 case needs to be put together.
Starting the build
Test boot
Wire managment, not really just zip tie and stuff it lol
Using a fan controller so I don't have to plug them into the motherboard.
Finished
With the side panel on
-
liveturbo24 got a reaction from Almercenary in Parvum Cases
Yup mu currect system is inside a Parvum S1.0 case. Case is made for custom water cooling but can be use for normal builds. Fittment with the panels is good not the best. Case is not quite. You will hear the fans even at low speeds. There's not much to this case. Put it together and build a system. Also if you email them they will do more custom cuts, colors and other stuff for you for a price. They are a small but good company. Only way to contect them is thru email. Which takes a day to get a reply. I had issuse when I got the case. They took care of it for me but took another month due to email replies and that there's a ocean inbetween them and me. But I love my case and will be keep it forever. Even if I change cases I will still keep it.
-
liveturbo24 got a reaction from OpposingForces in What's the First Console & Game You Ever Had?
First console: NES
First game: Super Mario Bros/Duck Hunt
-
liveturbo24 reacted to venturizhou in EVGA Hadron "SS Wingin' It" (Update 2/26/14)
Yeah, I had issues with Kaveri and Arch Linux, looked around on their forums and Google and couldn't find a google solution. Combination of it being new and AMD drivers on Linux being garbage so I revamped my build. Everything should be here and done by this week.
Just need to paint the EVGA stickers from silver to red. Just figuring out how I want to mask off the letters. There is liquid mask but I don't feel like dropping an extra $15 for liquid mask and brush I will barely use. Probably some more ghetto attempt then.
-
liveturbo24 got a reaction from Vypa in Project: Aspros
Hello everyone. First off I have to say I'm not good at writing up a build log. But I'll try.
This build is more of swaping current parts into a new case. Just wanted something different and clean. Note current setup is using a MSi Z77 Mpower with will be swap out.
There's the part list.
Case: Parvum Systems S1.0 white
CPU: i5 3570k
CPU Cooler: H100i
MOBO: Asus Maximus V Gene
Memory: Cruical Tactial Tracer 16GB @ 1866
GPU: EVGA GTX 680 FTW+ 4GB
Boot drive: Sansung 840 Pro 128GB SSD
Storage: WD VelociRaptor 600GB HDD
PSU: Corsair AX850
3 Enermax Cluster 80mm PWM fans white LED
4 Enermax Cluster 1500RPM 140mm white LED
2 Sliverstone 120mm fan filter
1 Silverstone 140mm fan filter
5 Cable clamps
2 Bitfenix SATA3(6GB/s) cables white sleeve
1 BitFenix 6pin GPU cable white sleeve
1 BitFenix 8pin GPU cable white sleeve
1 BitFenix ATX 24pin cable white sleeve
1 Bitfenix EPS 8pin cable white sleeve
1 BitFenix Internal USB2 cables white sleeve
Parvum S1.0 case needs to be put together.
Starting the build
Test boot
Wire managment, not really just zip tie and stuff it lol
Using a fan controller so I don't have to plug them into the motherboard.
Finished
With the side panel on
-
-
-
liveturbo24 got a reaction from mikeeginger in Project: Aspros
Hello everyone. First off I have to say I'm not good at writing up a build log. But I'll try.
This build is more of swaping current parts into a new case. Just wanted something different and clean. Note current setup is using a MSi Z77 Mpower with will be swap out.
There's the part list.
Case: Parvum Systems S1.0 white
CPU: i5 3570k
CPU Cooler: H100i
MOBO: Asus Maximus V Gene
Memory: Cruical Tactial Tracer 16GB @ 1866
GPU: EVGA GTX 680 FTW+ 4GB
Boot drive: Sansung 840 Pro 128GB SSD
Storage: WD VelociRaptor 600GB HDD
PSU: Corsair AX850
3 Enermax Cluster 80mm PWM fans white LED
4 Enermax Cluster 1500RPM 140mm white LED
2 Sliverstone 120mm fan filter
1 Silverstone 140mm fan filter
5 Cable clamps
2 Bitfenix SATA3(6GB/s) cables white sleeve
1 BitFenix 6pin GPU cable white sleeve
1 BitFenix 8pin GPU cable white sleeve
1 BitFenix ATX 24pin cable white sleeve
1 Bitfenix EPS 8pin cable white sleeve
1 BitFenix Internal USB2 cables white sleeve
Parvum S1.0 case needs to be put together.
Starting the build
Test boot
Wire managment, not really just zip tie and stuff it lol
Using a fan controller so I don't have to plug them into the motherboard.
Finished
With the side panel on
-
liveturbo24 got a reaction from LibertyBaller in Project: Aspros
Hey everyone. Thanks for the comments. I could not be happier with this build. Its clean and it's different. Just what I wanted. Now I have to find a new home for the Cosair 600T and MSi Mpower motherboard.
-
liveturbo24 got a reaction from Nickadeamus in Project: Aspros
Hello everyone. First off I have to say I'm not good at writing up a build log. But I'll try.
This build is more of swaping current parts into a new case. Just wanted something different and clean. Note current setup is using a MSi Z77 Mpower with will be swap out.
There's the part list.
Case: Parvum Systems S1.0 white
CPU: i5 3570k
CPU Cooler: H100i
MOBO: Asus Maximus V Gene
Memory: Cruical Tactial Tracer 16GB @ 1866
GPU: EVGA GTX 680 FTW+ 4GB
Boot drive: Sansung 840 Pro 128GB SSD
Storage: WD VelociRaptor 600GB HDD
PSU: Corsair AX850
3 Enermax Cluster 80mm PWM fans white LED
4 Enermax Cluster 1500RPM 140mm white LED
2 Sliverstone 120mm fan filter
1 Silverstone 140mm fan filter
5 Cable clamps
2 Bitfenix SATA3(6GB/s) cables white sleeve
1 BitFenix 6pin GPU cable white sleeve
1 BitFenix 8pin GPU cable white sleeve
1 BitFenix ATX 24pin cable white sleeve
1 Bitfenix EPS 8pin cable white sleeve
1 BitFenix Internal USB2 cables white sleeve
Parvum S1.0 case needs to be put together.
Starting the build
Test boot
Wire managment, not really just zip tie and stuff it lol
Using a fan controller so I don't have to plug them into the motherboard.
Finished
With the side panel on
-
liveturbo24 got a reaction from tlx in Project: Aspros
Hello everyone. First off I have to say I'm not good at writing up a build log. But I'll try.
This build is more of swaping current parts into a new case. Just wanted something different and clean. Note current setup is using a MSi Z77 Mpower with will be swap out.
There's the part list.
Case: Parvum Systems S1.0 white
CPU: i5 3570k
CPU Cooler: H100i
MOBO: Asus Maximus V Gene
Memory: Cruical Tactial Tracer 16GB @ 1866
GPU: EVGA GTX 680 FTW+ 4GB
Boot drive: Sansung 840 Pro 128GB SSD
Storage: WD VelociRaptor 600GB HDD
PSU: Corsair AX850
3 Enermax Cluster 80mm PWM fans white LED
4 Enermax Cluster 1500RPM 140mm white LED
2 Sliverstone 120mm fan filter
1 Silverstone 140mm fan filter
5 Cable clamps
2 Bitfenix SATA3(6GB/s) cables white sleeve
1 BitFenix 6pin GPU cable white sleeve
1 BitFenix 8pin GPU cable white sleeve
1 BitFenix ATX 24pin cable white sleeve
1 Bitfenix EPS 8pin cable white sleeve
1 BitFenix Internal USB2 cables white sleeve
Parvum S1.0 case needs to be put together.
Starting the build
Test boot
Wire managment, not really just zip tie and stuff it lol
Using a fan controller so I don't have to plug them into the motherboard.
Finished
With the side panel on
-
-
liveturbo24 reacted to hehehehhehehehe in Project: Aspros
This deserves to be featured on the live stream...
-
liveturbo24 got a reaction from KneesWeak in Project: Aspros
Hello everyone. First off I have to say I'm not good at writing up a build log. But I'll try.
This build is more of swaping current parts into a new case. Just wanted something different and clean. Note current setup is using a MSi Z77 Mpower with will be swap out.
There's the part list.
Case: Parvum Systems S1.0 white
CPU: i5 3570k
CPU Cooler: H100i
MOBO: Asus Maximus V Gene
Memory: Cruical Tactial Tracer 16GB @ 1866
GPU: EVGA GTX 680 FTW+ 4GB
Boot drive: Sansung 840 Pro 128GB SSD
Storage: WD VelociRaptor 600GB HDD
PSU: Corsair AX850
3 Enermax Cluster 80mm PWM fans white LED
4 Enermax Cluster 1500RPM 140mm white LED
2 Sliverstone 120mm fan filter
1 Silverstone 140mm fan filter
5 Cable clamps
2 Bitfenix SATA3(6GB/s) cables white sleeve
1 BitFenix 6pin GPU cable white sleeve
1 BitFenix 8pin GPU cable white sleeve
1 BitFenix ATX 24pin cable white sleeve
1 Bitfenix EPS 8pin cable white sleeve
1 BitFenix Internal USB2 cables white sleeve
Parvum S1.0 case needs to be put together.
Starting the build
Test boot
Wire managment, not really just zip tie and stuff it lol
Using a fan controller so I don't have to plug them into the motherboard.
Finished
With the side panel on
-
liveturbo24 reacted to WunderWuffle in Parvum Systems ITX Case Prototype and Built Log
The one made for Asus looks awesome!
-
-
liveturbo24 got a reaction from graw1187 in Prometheus: CAD/workstation/gaming
build looks sweet. nice job
-
liveturbo24 reacted to deguzi in Project: Aspros
i absolutely love this build in every way shape and form. that case has amazing aesthetics. and awesome pics of it :D
-
liveturbo24 got a reaction from TALHA in Project: Aspros
Hello everyone. First off I have to say I'm not good at writing up a build log. But I'll try.
This build is more of swaping current parts into a new case. Just wanted something different and clean. Note current setup is using a MSi Z77 Mpower with will be swap out.
There's the part list.
Case: Parvum Systems S1.0 white
CPU: i5 3570k
CPU Cooler: H100i
MOBO: Asus Maximus V Gene
Memory: Cruical Tactial Tracer 16GB @ 1866
GPU: EVGA GTX 680 FTW+ 4GB
Boot drive: Sansung 840 Pro 128GB SSD
Storage: WD VelociRaptor 600GB HDD
PSU: Corsair AX850
3 Enermax Cluster 80mm PWM fans white LED
4 Enermax Cluster 1500RPM 140mm white LED
2 Sliverstone 120mm fan filter
1 Silverstone 140mm fan filter
5 Cable clamps
2 Bitfenix SATA3(6GB/s) cables white sleeve
1 BitFenix 6pin GPU cable white sleeve
1 BitFenix 8pin GPU cable white sleeve
1 BitFenix ATX 24pin cable white sleeve
1 Bitfenix EPS 8pin cable white sleeve
1 BitFenix Internal USB2 cables white sleeve
Parvum S1.0 case needs to be put together.
Starting the build
Test boot
Wire managment, not really just zip tie and stuff it lol
Using a fan controller so I don't have to plug them into the motherboard.
Finished
With the side panel on
-
liveturbo24 got a reaction from Nicktrance in Project: Aspros
Hello everyone. First off I have to say I'm not good at writing up a build log. But I'll try.
This build is more of swaping current parts into a new case. Just wanted something different and clean. Note current setup is using a MSi Z77 Mpower with will be swap out.
There's the part list.
Case: Parvum Systems S1.0 white
CPU: i5 3570k
CPU Cooler: H100i
MOBO: Asus Maximus V Gene
Memory: Cruical Tactial Tracer 16GB @ 1866
GPU: EVGA GTX 680 FTW+ 4GB
Boot drive: Sansung 840 Pro 128GB SSD
Storage: WD VelociRaptor 600GB HDD
PSU: Corsair AX850
3 Enermax Cluster 80mm PWM fans white LED
4 Enermax Cluster 1500RPM 140mm white LED
2 Sliverstone 120mm fan filter
1 Silverstone 140mm fan filter
5 Cable clamps
2 Bitfenix SATA3(6GB/s) cables white sleeve
1 BitFenix 6pin GPU cable white sleeve
1 BitFenix 8pin GPU cable white sleeve
1 BitFenix ATX 24pin cable white sleeve
1 Bitfenix EPS 8pin cable white sleeve
1 BitFenix Internal USB2 cables white sleeve
Parvum S1.0 case needs to be put together.
Starting the build
Test boot
Wire managment, not really just zip tie and stuff it lol
Using a fan controller so I don't have to plug them into the motherboard.
Finished
With the side panel on
-
liveturbo24 reacted to Stav Kats in Project: Aspros
In Greek Aspros means white, so yea good job on that mate.
-
liveturbo24 got a reaction from alpenwasser in Project: Aspros
Hello everyone. First off I have to say I'm not good at writing up a build log. But I'll try.
This build is more of swaping current parts into a new case. Just wanted something different and clean. Note current setup is using a MSi Z77 Mpower with will be swap out.
There's the part list.
Case: Parvum Systems S1.0 white
CPU: i5 3570k
CPU Cooler: H100i
MOBO: Asus Maximus V Gene
Memory: Cruical Tactial Tracer 16GB @ 1866
GPU: EVGA GTX 680 FTW+ 4GB
Boot drive: Sansung 840 Pro 128GB SSD
Storage: WD VelociRaptor 600GB HDD
PSU: Corsair AX850
3 Enermax Cluster 80mm PWM fans white LED
4 Enermax Cluster 1500RPM 140mm white LED
2 Sliverstone 120mm fan filter
1 Silverstone 140mm fan filter
5 Cable clamps
2 Bitfenix SATA3(6GB/s) cables white sleeve
1 BitFenix 6pin GPU cable white sleeve
1 BitFenix 8pin GPU cable white sleeve
1 BitFenix ATX 24pin cable white sleeve
1 Bitfenix EPS 8pin cable white sleeve
1 BitFenix Internal USB2 cables white sleeve
Parvum S1.0 case needs to be put together.
Starting the build
Test boot
Wire managment, not really just zip tie and stuff it lol
Using a fan controller so I don't have to plug them into the motherboard.
Finished
With the side panel on