Ruda

The eintire drive

Dear Community. I have recently made an image with Macrium Reflect of an Windows 10 install With a WD sata ssd. I wanted to restore this backup to a brand new PC with an NVME SSD. The restore procedure completed successfully but it wont boot. I suspect that windows isntall does not have the drivers for the NVME drive and therfore it wont book. Is there a way how to add the drivers to the image? I can browse the image and see the contents. The original PC is away for a week. Thank you for your tips. Radislav

Sorry for the stupid picture... That's all my friend could give me.

Dear Community. I would like to ask you, if its possible to buy a replacement LED for Samsung 65" TV. I just don't know where to buy such a thing. Are there any caveats? E.g. Part numbers/ compatibility lists for each model to look out for? Before you ask me... I have contacted an authorized service, but the repair is extremely expensive and I would like to try to repair it on my own. Many thanks.

Thanks for your reply She has a netbook and its really crap but until i buy her a new laptop I would like for her to have a place for some light graphics work like Gimp and Inkscape... nothing fancy... + I am coding an invoicing app for her as she is starting a small business and I would like to have a customer, order and invoice database. With the database... perhaps I should just buy a slot somewhere.. but I have so much hardware at home Radislav

Dear All. I would like to ask you all for a piece of advice. I would like to have my workstation accessible via RDP from a remote location. I don't want to have a public IP though. I have heard somewhere that there is an option to do something called dymaicDNS and that you have to buy a domain or something like that. Can anyone point me to a tutorial or can anyone tell me how to do it? I am not doing that just for the rdp connection but I want some additional database access in the near future as well. (thats why i dont want just a teamviewer or anydesk handle) I think that Linus sorta covered this in his remote garage door video... but I am not sure if this is applicable. Best Wishes. Radislav

Dear Beloved Community I am turning to you again and I seek help. My friend has connected his External USB had drive to an Android device and accidentally formatted the contents. I have advised him to disconnect the drive and prevent any writes to the drive. In order to recover the data, we have tried Recuva and a whole bunch of other software but it turns out its quite a minefield. Almost everything can find the data, but it charges a hefty sum to recover the data (requires the pro versions) Can you recommend me any alternative which works and I wont have to sell my liver. (sorry not a native speaker + purchasing power in the Easter block is not what it used to be, hence the price. For us is ~80 USD quite a bit) Thanks again.

Dear All I would like to ask you for an advice. I am a junior network admin at an undisclosed corporation and we have and old integration system which handles barcode reader input via Serial connection over TCP/IP. The older readers have a RS 232 port at the end and are connected to a Lantronix Serial to Ethernet adaper. The adapter acts as an COM server and accepts input from the barcode reader and relays it to the App witch listens at a specific port and specific IP. That setup works. But here is the cavieot... The new barcode readers bought by the administration are USB readers... Is there a piece of software or a way how to turn the USB bar code reader or the input to the COM TCP/IP server? Can I create / emulate the COM server(essentially the lantronix device)? Many thanks for your advice...!

Will check that in the evening when everyone leaves the office and we will be able to take the servers down again. ... But for now its great that the workers can work in the warehouse and the customer service can accept orders .. thanks again. Its a SCSI harddrive array.

SOLVED: The problem was the BIOS on the Dell server. node interleaving switched to disabled and after enabling it it works better now. Thanks a lot.

Yes. Now actually my colleagues is checking the BIOS settings on the bare metal... .. So i will let you know about the result... It sucks to be the new guy at work,

Dear friends and form members This is a plea for help Last week we had a power outage in our facility and ever since we have noted, that our database server is very slow... (VM ware server with virtual machines) We began to investigate the drives a and everything and the last thing we noticed that the VM has no l1 or l2 or l3 chache values. is it possible that during the shutdown the bios or something got reset and the cpus are not working optimally? Can we assign the cache to the vm in ESXI? The reason for this conclusion is that a dev server with much older hardware had 3x the performance with the same dataset. How can we fix this? Any idea is welcome...

Dear Forum I have an unraid Setup an I have one Windows 10 VM. I recently upgraded the GTX 730 for a 660 and There is no signal comming through to the monitor. Linux mint reports bad X server configuration error a promts for a restart. I am hopeless. VTD is enabled Thanks for help Radek

Hi. My work mate, a professional driver, has a dilemma. Is there more value in a smartphone with a navigation app or with a dedicated device like TomTom or Garmin. It seemed to me that the smartphone has better screen and it has more purpose. Or is there better signal perception with the dedicated device or what are the advantages or disadvantages. Any experience? Advice? I personally love my G4 as a gps hooked to my plug all day. Got everywhere I needed to be. Thanks

Mine is Logitech G510 keyboard + G500s mouse. My headphones are Sennheiser PX 200 II