cwalker457

I recently built a computer after saving up for about 6 months and I thought I would dive into overclocking. My CPU is the Ryzen 7 1700 Mobo is Asus Rog Strix x370-f gaming When I went to overclock, I set a D.O.C.P that set my APU at 102.2 and my RAM at 1.35v and the ram at 2933 mhz. I then set my cpu multiplier at 36 and my voltage at 1.2250 which I ran on prime 95 for about 3 hrs, no errors so far. However, when I look at HW Monitor and CPU-Z my vcore is a mere ~0.6v at max load, my VID is around me set 1.225v, and the VDD (Node 0) says that my max was 3.15 volts! I have no clue what is happening and how my voltage is either really high, or really low. I have updated all my drivers and the BIOS but still, no avail. Additionally, in the bios, it never seems to show the voltage that I actually set (1.225) it always shows a little more. Any help would be greatly appreciated because I do not want to destroy my computer and I want to get the most longevity as possible. Thanks! Here are some screenshots: HWMonitor P1 and P2: https://gyazo.com/216b4b851a09833dee06f530834a712a https://gyazo.com/c9f812d543f70442da2e182dda236454 CPU-Z: https://gyazo.com/c9f812d543f70442da2e182dda236454 Ryzen Master: https://gyazo.com/795daf2cb2dd8dcc91ea7ee2561cabe3

Hi! so i have some networking questions since i recently upgrade internet services with comcast and was wondering some things! 1st: should i buy my own modem? or use the one that they charge me monthly for? 2nd: if i buy buy a third-party modem, should i buy a modem with a wifi router built in? or a modem with no wifi and then get a seperate router? 3rd: do you have have any suggestions for a modem with wifi built in? or a router plus a modem combo that is under $200 ? Thanks for any advice !