zombiepixel

nope. you are wrong.

I know that the fan is broken i have to replace it lol

Simple build for myself because my last computer blew up lol, i no longer game so i am not going to be spending money on a new graphics card. i mainly program so i am going to be using linux mint for this rig.
 
The parts i am going to be using is:
 
Motherboard:Asus TUF B450M-Plus 
Case: Inwin D Frame Mini
CPU: AMD Ryzen 7 2700X
RAM: Corsair Vengeance LPX 32GB (2x16GB) 3200MHz C16 DDR4 DRAM
GPU: gtx 660ti
PSU: EVGA 110-BQ-0500-K1, 500 Bq, 80+ Bronze 500W, Semi Modular,
Storage Device: Samsung 970 EVO SSD 500GB
Budget: 500-700 USD

This is my 2nd post about Blockchain, still curious as to what you guys think about it. DeFi, DCC, and other Dapps? what is yall opinion on it all? which projects is exciting? non fungible tokens? interesting games like cryptokitties and gods unchained?

RISC-V is an open source architecture. 
Just like ARM or x86, there isn't known backdoors in the architecture itself, but rather the implementations of that.
 
So for RISC-V, you'd need a chip developer to produce it in an open-source fashion, something which really isn't seen. The Kendryte K210 is open source, as far as I know (and I do own one). You'll also need to make sure your commication chips are also open source, which is harder yet for wireless.

Well, first of all, we don't know if Intel's ME or AMD's PSP have backdoors. It's only presumed.
The Raspberry Pi is based on ARM chips, which are prevalent in mobile phones. Is it possible? Maybe.
The Pi 4, for example, is based on the Cortex A72 CPU, as part of the Broadcom BCM2711 SoC.
 
The datasheet is available here: https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711/rpi_DATA_2711_1p0.pdf
 
As far as we know, there isn't a management engine in this chip similar to Intel ME or AMD PSP. The SoC still incorporates baked in code:

(https://www.raspberrypi.org/documentation/hardware/raspberrypi/booteeprom.md)
 
So, probably not. But maybe.

nope. you are wrong.

nope. you are wrong.

nope. you are wrong.

nope. you are wrong.

all u need now is a batman logo cutout and ur set

got ham?

I didn't buy the parts in NJ
i bought them online from this site: http://www.globalindustrial.com
this is one of the parts: http://www.globalindustrial.com/p/storage/fittings-framing-rail/Kee-Klamp-Fittings/kee-klamp-single-socket-tee-5
also they come in different sizes. mine is for 1-1/4"
and TBH it does cost a lot to do bro. My parts not counting the pipe cost or the table top(which i have yet to get) was about $240. The pipes you can get at home depot.
ALSO make sure you get aluminum fittings. it is a bit more expensive then the galvanized iron but i think its worth it.

yes i am! um... the back side of the desk will have a long piece of wood(8''x59'') and on that wood will be hooks which i will route cables. it will look very clean when it is done
like this: 

yes i am! um... the back side of the desk will have a long piece of wood(8''x59'') and on that wood will be hooks which i will route cables. it will look very clean when it is done
like this: 

plz :'''(

okokokok i now see what u mean lol!!! the drawing is pretty bad :') its 59-Length, 23-Width, 29-Height

cant wait for the next episode tmmrw

remember all shows are low budget first season. season 2 will destroy the first

I love this show! so dope and its about hacking and computers and stuff so hey! 

i got pretty damn confused too... i was like "whaaa...."