Jump to content

indexcow

Member
 View Profile  See their activity

  • Posts

    88

  • Joined

  • Last visited

 Content Type 

Everything posted by indexcow

  1. indexcow
    Update: I have configured my Ram to use the XMP 2 profile (still 3200mhz) and I have manually set the Ram voltage to 1.4v. This seems to be the most stable I have gotten so far.
  2. indexcow
    Thank you for educating me on that. I have already tested with bios factory defaults as outlined in my OP
  3. indexcow
    Thank you for that, what makes 3200 an overclock? I thought that was just the speed it runs at. That is the speed that is specified on the RAM product page, am I missing something?
  4. indexcow
    Hello everyone I just picked up some upgrades and I have been experiencing some crashing ever since. I reinstalled windows as part of my upgrade. When Running Aida64 stability test with memory testing disabled it runs fine but when memory testing is enabled it fails after about 10 minutes. I have: Resorted Bios to factory defaults - This gave me a Aida64 hardware failure error message. Used XMP profiles 1 and 2 - both gave AIDA64 hardware failure error as well. Manually set RAM speed to 3200mhz and tested using 1.40 and 1.45 volts and these combinations resulted in the same Aida64 hardware failure result. After posting this I will be running RAM tests to see if it is bad but is there any other advise you can think of to get this working for me? As far as my research goes the CPU and Motherboard both support 3200Mhz RAM. Specs: Ryzen 5 3600xt MSI x470 Gaming plus on the newest Bios version Corsair Vengeance LPX 2x8gb 3200mhz C16 EVGA 1070 ti Corsair 850W PSU (only using the 8 Pin CPU power, I left the 4 Pin empty)
  5. indexcow
    Ask as many questions as you want I'm glad to give back to the community, next time I play I will check and report back!
  6. indexcow
    Yes
  7. indexcow
    I get anywhere from 110-140fps depending on the map and what part of the map, that's with everything on ultra except for AA
  8. indexcow
    im just going to sell my second r9 290
  9. indexcow
    I popped out one of my R9 290's and was getting a very smooth 130fps im very happy with that. staying single! It has so much potential, playing BF 3 with 144fps and nothings wrong then going to BF 4 and this mess, its a shame.
  10. indexcow
    Its a corsair CX750m
  11. indexcow
    thank you to all that helped me out, atleast i learned a little about overclocking
  12. indexcow
    ok heres the scoop, i got off track and forgot what the main issue here is. I overclocked to 4.3 and played some BF 4. CPU usage around 80% and GPU usage was the same as as it was. all over the place. nothing was overheating or throttling so as i t stand im going back to a single GPU config until theres an update.
  13. indexcow
    yes this helps, so what voltage do i not want to go over? i hear to stop at 1.3 is this true?
  14. indexcow
    here is the highest i was able to get
  15. indexcow
    Oh in the video its desabled but I don't have that option I set it to level one
  16. indexcow
    Could that be why i was getting bluescreens
  17. indexcow
    ok guys so here is a video with my bios in it, i used the same settings as this guys but i set 1.25 volts and i used 45 for the multpilier instead, got blue screens. please look at the video and tell me what settings to use please<3
  18. indexcow
    So The Asrock bios is way different from the Asus one, its a lot more complex and I'm having a hard time finding everything, there's like two places for voltages and idk what's what
  19. indexcow
    I don't think your being rude, I used the bios built in auto overclocking feature and just selected the 4.0ghz option. I'll configure it Manually when I get home
  20. indexcow
    Idk if its just me but the terminology used in the asrock bios is confusing
  21. indexcow
    I'll try that when I get home:)
  22. indexcow
    I have it set to auto but in CPU z its like 1.27 or something
  23. indexcow
    Either I'm not very good at over clocking or i have a dud but I can't go over 4.0 without instability
  24. indexcow
    So I should start looking for a 4770k?
  25. indexcow
    Oh did you mean when the usage falls?
×