Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

airdeano

Moderator
  • Content Count

    11,937
  • Joined

  • Last visited


Reputation Activity

  1. Agree
    airdeano got a reaction from Ben17 in All right I had enough. I am unsubscribing from linustechtips.   
    since this has turned into a flamewar of sorts..
    <-LOCKED->
  2. Like
    airdeano got a reaction from Ben17 in 3D Printing   
    i bought a $125 creality cr 10 mini to build a prusa clone blackout edition (300x300x300 build area).
    gathering all the parts from new/used and globally.
     
    will use the full mk3 bear upgrade extrusions
    all printed parts PETG r3/4
    E3D w/24v50w heater and bondtech clone
    24v meanwell psu
    dual mosfet controls for the bed and hot end
    bigtreetech SKR Board V1.3 (32-bit) with tmc2208/drv8825
    rpi b3+ octoprint with touchscreen
     
    at least the plan is..
  3. Like
    airdeano got a reaction from Ben17 in Help with creality ender 3 3d printer   
    90% or better IPA (isopropyl alcohol) works well. i went to mirror/glass and aqua net hairspray no non-stick problems.
    thats an inherent issue on textured build surfaces.
  4. Informative
    airdeano got a reaction from Levent in Ender e3 Troubleshooting   
    yeah, the first layer usually makes/breaks a print.
    you'll need to get that distance tight:

     

  5. Agree
    airdeano got a reaction from Levent in Ender e3 Troubleshooting   
    congrats on the purchase..
    sounds like a nozzle/bed distance issue.
    got the GCode for me to test? i have an ender 3 as well with no printing issues.
  6. Agree
    airdeano got a reaction from 00RaZoR11 in Design Flaw in EK X-RES 100 DDC MX?   
    this has been an ongoing issue with the Laing DDC models. lack of airflow to cool the PCB and windings.
     
    this has been a short remedy:

     
    and even as far as to use a small fan:

     
    ek has even identified the issue and packaged an elite series:

  7. Like
    airdeano got a reaction from Ben17 in 3D Printing - Models, Tutorials, and Discussion   
    start a thread and others can keep on the top of the forum..
  8. Like
    airdeano got a reaction from Ben17 in Ender e3 Troubleshooting   
    initial impression:
    you are still barbecuing your filament at 225°
    6 walls is just too much and 40-50% infill is what tripped your print..
     
    here is what i just printed after your post:
    PLA3DBenchy28.gcode
     
    try this on a clean prepreped build platform
  9. Like
    airdeano got a reaction from Ben17 in Ender e3 Troubleshooting   
    turn the bed knobs three-nibs to the left (clockwise as viewed from the top), make your speed 25mm/sec for all initial layer options, turn that temp down to 205° and use the skirt. as your raft 'stuck' then your print should as well. still using the stock plastic extruder?
    check cooling fan option and use 87% for fan speed, 65% for min fan and 87% for max fan. that stack is melted as too fast to allow the layers to 'chill'.
    if you dont want the fan on, just use zero for all fan speed option, but leave the box checked.
  10. Like
    airdeano got a reaction from Ben17 in Ender e3 Troubleshooting   
    using which slicer profile?
  11. Informative
    airdeano got a reaction from Ben17 in Ender e3 Troubleshooting   
    yeah, the first layer usually makes/breaks a print.
    you'll need to get that distance tight:

     

  12. Like
    airdeano got a reaction from Ben17 in Ender e3 Troubleshooting   
    ok, got the code and 15min in this is what i believe your issues are:
    you prolly have too much distance between your nozzle and bed surface.
    your .20 profile is vague and non-defined.
    once done, we'll see if more comes to mind.
     
    here is a good starting profile should be importable into cura 4.3
    Magic0.20.curaprofile
     
    your filament temp is too high 225° is at top end should be 190°-220° for PLA 205° is a great starter.
    your part cooling fan is on during the first layer.. not best practice for laying down the first lines.. for PLA in ambient environment of 30° can easily run without PC fan.
    i also believe your 'quality tab has some errors:
    layer height is .20 and initial layer height .20
    all others should be .40
    leave the width 100% for now.
     
    when done i'll reply with more.
    but check that distance on the nozzle to bed surface, should be a papers thin gap:
     
  13. Agree
    airdeano got a reaction from Ben17 in Ender e3 Troubleshooting   
    congrats on the purchase..
    sounds like a nozzle/bed distance issue.
    got the GCode for me to test? i have an ender 3 as well with no printing issues.
  14. Informative
    airdeano got a reaction from Ithanul in Ender e3 Troubleshooting   
    yeah, the first layer usually makes/breaks a print.
    you'll need to get that distance tight:

     

  15. Like
    airdeano reacted to Derrick zellner in $2,500 pc   
    Gaming and content creation 
  16. Like
    airdeano got a reaction from Tegos in All right I had enough. I am unsubscribing from linustechtips.   
    since this has turned into a flamewar of sorts..
    <-LOCKED->
  17. Agree
    airdeano got a reaction from NotABigGamer in All right I had enough. I am unsubscribing from linustechtips.   
    since this has turned into a flamewar of sorts..
    <-LOCKED->
  18. Like
    airdeano got a reaction from dizmo in All right I had enough. I am unsubscribing from linustechtips.   
    since this has turned into a flamewar of sorts..
    <-LOCKED->
  19. Agree
    airdeano got a reaction from Hackentosher in Ender e3 Troubleshooting   
    congrats on the purchase..
    sounds like a nozzle/bed distance issue.
    got the GCode for me to test? i have an ender 3 as well with no printing issues.
  20. Agree
    airdeano got a reaction from VegetableStu in All right I had enough. I am unsubscribing from linustechtips.   
    yeah, if there are no other contributions to this topic, we'll just need to close it. seems the new topic of downloads is taking the show..
  21. Agree
    airdeano got a reaction from Chevy_Monsenhor in All right I had enough. I am unsubscribing from linustechtips.   
    yeah, if there are no other contributions to this topic, we'll just need to close it. seems the new topic of downloads is taking the show..
  22. Agree
    airdeano got a reaction from The1Dickens in All right I had enough. I am unsubscribing from linustechtips.   
    yeah, if there are no other contributions to this topic, we'll just need to close it. seems the new topic of downloads is taking the show..
  23. Funny
    airdeano got a reaction from r2724r16 in Can you run 19 rx580 8gb   
    please refrain from necro-ing an older thread, instead.. make a new one.
    the info is dated and with newness come fresh data..
     
  24. Like
    airdeano got a reaction from Leonade in New here   
    PC problems are usually discussed in the Troubleshooting forums: https://linustechtips.com/main/forum/46-troubleshooting/
  25. Like
    airdeano reacted to D.U.F.F. in How to bipass fortiguard web filtering   
    Very simple. Get your own Mobile Data subscription 😏
×