Sashi

Finally done!

More changes... decided to use my NF-F12s My stuff came in and I started the tubing process Moar pics!

Some updates and some changes. Got the P5 and started to drain my current build (Fractal Design S). Also started to build in...or is it out? of the P5. Some hardware changes.. Going to keep my current D5 Vario pump and Bitspower Res

Hey guys! I am back after a long time! I am planning a new old build (New case with some new W/C hardware & old cpu parts) I am also going to plan on ALL angled fittings with little to no bends on the acrylic Specs are as follows CPU Intel Core i7 6700k Motherboard Asus Z170-A RAM 2x8GB DDR4-3200 GSkill Case Thermaltake Core P5 GPU GTX 770 2GB (Yes I know this is old but all the games I play I have no problems) Power Supply XFX Pro Black Edition 750W Watercooling Hardware Pump EK-XRES 140 Revo D5 PWM CPU Block EK-Supremacy EVO - Full Nickel (Original CSQ) GPU Block EK-FC770 GTX - Acetal+Nickel Radiator EK-CoolStream XE 480 (Quad) XE Fans 4x Scythe Gentle Typhoon 1850 RPM Fitting 1x 20mm Spacer Adapter Male/Female - Matte Black Fitting 1x 3-way Splitter Triple Rotary Y Block Crossconnect Adapter - Matte Black Fitting 1x 15mm Spacer Adapter Male/Female - Matte Black Fitting 4x G1/4 Enhanced Dual 90-Degree Multi-Link Adapter - 12mm OD Rigid Tube - Matte Black Fitting 6x Enhanced Rotary 90-Degree Multi-Link Adapter 12mm - Mat Black Fitting 3x 90 Degree Rotary Adapter M/F G1/4 - Matte Black Misc Dazmode Protector & Distilled Water

Some parts came in!

Used to be on the side of the closet.. so bare now Being disassembled

Haha I will!

So I built my skylake computer that is now wall mounted.. well that is changing. Wall mounted PC is great but servicing is so time consuming especially for watercooling. So I am rebuilding my PC into a real case :). Specs Case: Fractal Design S - No window (sadly the case will sit flush to the wall/close to the wall where the window would be so I can't see it anyways) CPU: Intel Core i7 6700k Motherboard: ASUS Z170-A RAM: GSkill Ripjaws 16GB DDR4 Ram SSD: Samsung 850 EVO 250GB SSD HDD: WD Scorpio Black 750GB HDD GPU: GTX 770 (Will probably upgrade to a 1070... maybe 1080) PSU: XFX 750W Black Edition Watercooling Parts Pump: D5 Vario Reservoir: Bitspower Water Tank Z-Multi 150 Radiators: 2x Dazmode 360mm Extra Slim Radiator Fans: Scythe Gentle Typhoon AP-15 CPU Block: EK Supremacy EVO GPU Block: EK GTX 770 + Blackplate Fittings: Bitspower 12mm OD Rigid Tube - Matte Black Tubing: Crystal Link (Acrylic) Tube 12mm OD - White Misc 3-way Splitter, T Block Crossconnect Adapter - Matte Black 5mm Spacer Adapter - Male-Male G1/4 - Black QD3 Male Quick Disconnect No-Spill Coupling, Male Threaded G1/4 - BSPP - Black QD3 Female Quick Disconnect No-Spill Coupling, Compression for 10mm x 13mm (3/8in x 1/2in) *Black* 15mm Spacer Adapter Male/Female - Matte Black 90 Degree Rotary Adapter M/F G1/4 - Matte Black 14 mm Rotary Spacer Adapter - Male-Male G1/4 - Black Bitspower Drain Valve - Matte Black

Hey! I built a wall mounted PC a couple months ago. You can check my log I wouldn't worry about it being too heavy as long as you get it in the studs.. your wall is brick though so not sure how well that will work.. Upgrading is... painful since you would have to drill some new holes if you need to upgrade your GPU Make it look good and it'll look good. good luck!

It would look a bit better if I were to mount it on the wall but I am renting this place so if I were to start punching holes then that would be no good. I could putty it up later but eh. thats another expense I guess when I move out later

Happy new year! My build is complete! Just in time for the new year! Leak testing Cleaned up tubing Complete!

Some updates!

Some sad news .. PCI-E riser cable DOA Good news - Im getting a brand new one tomorrow.. very quick!

Some little update pictures. Still waiting on some stuff from Dazmode which should arrive soon..hopefully.. Mounted CPU waterblock..so shiny PCIE Riser cable came

Mine is more like a standing closet/wardrobe..hence the build name I guess