So i was building my new PC and i was around the step of placing the motherboard(MSI Z97 PC Mate) into the case (Define R5) kinda slotted it in and more or less aline the board, after screwing 1 screw in i found that the other holes are not in sync and the board position slightly changed (maybe it changed when i screwed it in... silly me)
First i tried to shift the board if i could aline but it can't so i decide to unscrew the first screw to replace the motherboard again, the screw would spin,counterclockwise but it won't come out at all, confused i decide to check the bottom if the standoff is at the other side of the case, and try to grip it while spinning the screwdriver, but the standoff isn't spinning along with the screw... so now i'm stuck, i can't take the board out and check because this one screw is screwing me (ehhh ) i wanted to try to unscrew the standoff from the otherside of the case but i don't have anything that can grip it that is small enough to fit in
Umm... Help... i already spent 4 hours trying to get that one screw out