Jump to content

TheProfosist

Member
 View Profile  See their activity

  • Posts

    13,174

  • Joined

  • Last visited

 Content Type 

Everything posted by TheProfosist

  1. TheProfosist
    Was your original recording VFR? if that is likely the cause I ran it through handbrake and forced the correct framerate and it fixes everything.
  2. TheProfosist
    battery life is amazing for a gaming mouse! also use lithium batteries its lighter and lasts longer
  3. TheProfosist
    page 1-35 states the M.2 share bandwith with PCIe x16_3 so if if use M.2 you cant use that slot those also share bandwith with SATA 5-6 and is in x2 normally. Making x4 would disable SATA 5-6 likely according to page ix you have 2x PCI-E x1 devices and PCIe x1_1 and PCIe x1_2 are physically open based on the image on page 1-18 nothign shows this bandwith being used my anything else
  4. TheProfosist
    that all depends on how the MFG distributed the lanes. I would need to know the exact Motherboard and CPU then look up the manual. Which you could do as well.
  5. TheProfosist
    The 960 Pro will be better performance for the same price or cheaper not sure on the launch date. you wont bottle neck one going though the DMI on Z170 two in RAID0 however will. One PCI-E 3.0 x4 SSD nearly uses up DMI 3.0. 2 of those drives in RAID 0 do have their reads being bottle necked. You also have to remember all the other stuff that has to go through there at the same time. The lowest chip does and id still rather have it. You just cant plan as much expansion as 40. You still have more total bandwith even without including DMI 2.0.
  6. TheProfosist
    Z97 actually allowed that to some extent as well id have to find the diagram. Like you could go down to 4 SATA and use that bandwith for other stuff. There are diagrams that show what is on which lanes. I have even seen ASUS Z170 ones for specific boards that were modified from standard. You get a ton of if this is enabled or used this is disabled or not available. Not a bad thing wish it was like that on my Sabertooth X99 because with a M.2 in it disables your x8 slot instead of dropping its speed to x4 and still being usable.
  7. TheProfosist
    include the lanes assigned to the USB ports and the LAN as well as sudio and SATA since that is included in Z170 but intel allows MFG's to disable them if they really think they need to. This is what Z170 boards that have dual or even triple M.2 slots do. You have to remember though that DMI 3.0 is roughly PCI-E 3.0 x4 which is what one M.2 drive would use so youll cap really quick.
  8. TheProfosist
    I would agree with this. But the 8 lanes of PCI-E 2.0 are fully open unless the MB MFG adds something that isnt usually built into the chipset. 40 lanes of CPU alone trumps the 16+"20". I still dont think you can call it 20 lanes because as long as all the normal stuff on the chipset is enabled there are really just 4 more than previously, enough for a M.2 drive.
  9. TheProfosist
    yes a horrible idea but #marketing wait what? no board would have that many devices usable at once youll run out of physical room first lol your reply rather confused me.
  10. TheProfosist
    Since there is less bandwith total and because a board would literally have to disable SATA and LAN to get you all 20 lanes for PCI-E slots and yes you can run GPU's through the Chipset. This is how you get crossfire capable boards that are not SLI certified. They run in the x4 slot through the chipset.
  11. TheProfosist
    haswell had more lanes (I believe 16) than that they were just tighter on what you could or couldnt disable that's generally built in like SATA ports, audio, LAN, etc Skylake has 20 lanes when pretty much nothing from the chipset is enabled including SATA ports. The big change was DMI 2.0 to 3.0 which also got you PCI-E 3.0. If you remember 3 SATA III SSDs in RAID 0 was kind of the limit with DMI 2.0. With the speed increase came more lanes basically enough for a M.2 without disturbing anything else. Just remember DMI 3.0 is still roughly PCI-E 3.0 x4 in total bandwidth.
  12. TheProfosist
    Never said that? even 28 lane X99 has more expandability
  13. TheProfosist
    everyone knocks off Cherry MX now...
  14. TheProfosist
    is this not the proper way to do things?
  15. TheProfosist
    24in 1920x1200 monitors in portrait work great for this already. I havent tried more height but I really dont see the need. You can see my setup here https://goo.gl/L4dhHg
  16. TheProfosist
    Their reducers dont have enough wattage on the resistor. You could easily make your own that or just feed it a lower voltage to begin with.
  17. TheProfosist

    I was reading about a certain post you were com…

    TheProfosist replied to Meragun's status update on TheProfosist's profile

    Your welcome and no problem. many people misunderstand that who situation.
  18. TheProfosist
    I do indeed. I would have to check what colors as I did sell one the last time I put them up. Looks like I sold there one for $50. That Meas I have left: 2x Yellow/Green 1x Yellow/White 1x Pink/White These were originally bought for customer projects and one for a personal build. They were MKC brand originally sold by Feng. Pics of them can be found here http://goo.gl/N1KdYn
  19. TheProfosist
    Wouldnt have minded going beige but I really like the Noctua on Black, Black on Noctua look! Black cable ties? Do you mean the sewing or the zipties/tyewraps?
  20. TheProfosist
    Have you tried a MX Master? It is the true successor to the MX Revolution the Performance MX is also in that family contact Logitech theyll swap it out if its still under warranty.
  21. TheProfosist
    sure if you know how to solder
  22. TheProfosist
    Progress is looking good!
  23. TheProfosist
    I picked me up a set of those for my KMAC Happy and KPad
  24. TheProfosist
    all of my vintage parts get tore apart for parts
  25. TheProfosist
    Im just replying to things that are in my email finally! im pretty much the same loving my Ergo Clears though!
×