I bought a lexmark b2236dw printer on a good sale recently set it up. I changed some settings threw chrome and now I can't connect to it via chrome and it changed the IP address (gives me the ip of 169.254.118.126) on it. When i go to to a factory reset on it threw the printer menus it says no log-in method configured. how can I do a hard factory reset on this printer.
ok so I recently bought a m.2 dive put the drive in but drop the screws outside of the case and can't find them. I emailed the motherboard manufacturer they mailed me the m.2 screws and stand offs. anyone know what size the screws for the heat sink are. it's a asrock x470 taichi board.
it was set to auto as defult. I set it to enable. it boost up to abouti seen it go up to 1.53v. it also bumped up the power avaiable to edc (650 A vs the 140 A) but also is only siting at around 7% and spiking up to 32%
that seemed to have fixed it kinda. It under volts to about 0.8 volts and under clocks to about 2.2 ghz like that a lot. while in games it still pegs the edc to 100% and only boosts to about 4 ghz but drops down to 2.2 alot and goes to about 70c in gaming.
the pump is working, it should i reset it and cleaned and reapplied thermal paste, nothing on the cooler, didn't try the stock cooler. case temp should be good if the motherboard is runing at 40c
I just built this system finally got to the point where the system isn't randomly freezing. Having issue where the edc is at 97-100% and sometimes throttles to about 2.1 ghz. temps range from 40c-120c depending on the program used to check temp.
cpu: 2700x
motherboard: asrock x470 taichi
power suply: evga gq 750 watt
gpu: evga gtx 1070 TI
ssd: samsung 850 pro
hdd: SEAGATE IRONWOLF 8TB HD
ram: 32GB g.skill ripjaws v 3200
cooler: corsair h100i pro rgb
hdd: SEAGATE IRONWOLF 8TB HD
ram: 32GB g.skill ripjaws v 3200
cooler: corsair h100i pro rgb
I currently run a l4d2 server (l4d2 seems to be verry picky with servers) looking to switch to a new provider. Also want to start to host other games like BF4 and killing floor 2.