Sir Asvald

Networking part of my lab.
 
Networking equipment:
 
Standard 8 port Netgear switch. Cisco 2960c - Outbound switch. Cisco 2960gc - Core switch.
I have 2 Pfsense VMs running in a HA/CARP, I also have site to site VPN. 192.168.20.0/24 is the tunnel.
 
Site A VLANS:
20 - IT Lan 10.1.20.0/24 21 - HomeGuest Lan 10.1.21.0/24 22 - IoT Lan 10.1.22.0/24
 
Site B VLANS
23 - DC LAN 10.1.23.0/24 26 - VMs 10.1.26.0/24

Who_doesnt_like_the_flashing_lights_12hhr0a.mp4

UND BEHOLDEN DER BLINKENLIGHTEN!

maybe i fixed it.
i uninstalled it and then instead of using the .exe to install i just browsed via device manager the drivers from the asus folder instead and installed them that way. Seems to be stable now. 138GB received and no crash! 
 

There is nothing that you can do tbh, there is something wrong at the ISP level. Best option is contact them and tell them your issue

I use pcloud comes with 2tb of storage, paid £300 one off payment. You can get additional encryption if want. You can sync OneDrive, Google Drive as well. 
There might be a sale going for Black Friday.
 

It's possible you're behind CG-NAT as well. On the main router connected to your ISP's line check your public IP address and then google "what is my ipv4 address" if those two don't match OR your router says your public IP address is in the range of 100.64.x.x to 100.127.x.x then you're behind CG-NAT

That would make sense. 

USB Switcher, Amazon has about a zillion different versions for around $20. 1-4 inputs, 2 outputs, plug the outputs into either PC and use a button to switch between them. 

Bare Metal install from Boot still works for non-compliant hardware. It won't work with a desktop upgrade. Though I had to do it for each version of Windows 11 they put out (eg. 22H2)
I have a TPM 2.0 module and Secure Boot enabled... just my CPU is too old.
 
BlackDragon

That's your issue. A WiFi repeater connects to a router and wireless devices on the same frequency. This means that your wireless devices will only get half of the bandwidth available. Less bandwidth leads to slower connection speeds. You need to get an Wireless access point.
 

My G9 NEO showed up yesterday. It's going to take a bit of getting used to.
 

Your download speed and upload speeds have nothing to do with your ping. Ping is used to measure latency. It's the distance between you and the servers. If you're far away from the server or you using WiFi then you're going to get issues. Other issues could be that the server is under load.

Your download speed and upload speeds have nothing to do with your ping. Ping is used to measure latency. It's the distance between you and the servers. If you're far away from the server or you using WiFi then you're going to get issues. Other issues could be that the server is under load.

Your download speed and upload speeds have nothing to do with your ping. Ping is used to measure latency. It's the distance between you and the servers. If you're far away from the server or you using WiFi then you're going to get issues. Other issues could be that the server is under load.

Changing the default admin password and also the WiFi passwords. This is important. 

Changing the default admin password and also the WiFi passwords. This is important. 

This is the final plan for my work in progress.  Everything on the chart is done except for the SW3_1 and WAP2 as I'm not entirely convinced I need them yet.  Spent the last week reworking my incoming 'hub' using a WallControl board and customizing 3D printable accessories you can find on this project:
GitHub - aderusha/DDD-Printable-Wall-Control-System: DDD Printable Wall Control System, 3d printable organization solutions for Wall Control pegboards
 
It was as simple as downloading the base model, measuring up the hole distances for the wall mount hooks, and adding attachment nubs to each of the surfaces.  Add in some Magnetic cable tie mounts and you have a simple, completely customizable pegboard layout.  The hardest part was waiting for the Ender3 to print all this up.  
 
From Top Left:  Fiber ONT  (Active), Surfboard Cablemodem (Available as backup if needed), iBase Edgedevice using pfSense,
Bottom Left: ScreenBeam Bonded 2.5 MOCA adapter for reaching the rest of the house, TL-SG108PE connecting everything together and powering WAP1.  
 

 
 

How do you know that they didn't give permission?

How do you know that they didn't give permission?

I have the same motherboard, and it's happened to me. To fix it, turn off your PC and unplug the PSU. Hold onto the the power button for a few 10-15 seconds. (I usually hold it down for 30 seconds) and then let go. The reconnect the PSU and turn on your PC.

-= Topic Locked =-
There is point to everything, a solution to all problems.
Yours has been answered, many, many times. This thread is has come to its conclusion. 

Ihr seid gnädigerweise frei von den Verwüstungen der Intelligenz.

will making all my devices connect to 2.4ghz but my pc is using wired connection will it make the internet faster will it lower ping?