Jump to content

alexnt

Member
  • Posts

    353
  • Joined

  • Last visited

Everything posted by alexnt

  1. I'm looking for information on a couple of hdd enclosures. I'm using a natec docking station on a debian vm right now but I can't find the chipset model. I know only that it is a jmicron chipset as I can see it in the esxi devices but not the model and I want to compare with the chipset of the hdd enclosures below. This chipset seems to support SMART information. I can see all information about the hdd drive. So, now I'm planning to replace this dock with a hdd enclosure. I'm interested on these two: https://de.assmann.shop/en/Computer-and-Office/HDD-and-SSD-Accessories/3-5-SSD-HDD-Enclosure-SATA-3-USB-3-0.html https://www.lc-power.com/en/product/hddssdm2raid-enclosures/889cm35/lc-35u3-becrux.html The digitus mentions that it has JMS578 chipset model but it doesn't mention if it supports UASP and SMART passthrough like the lc-power. Has anyone any of this enclosures to ensure that they support the features I'm asking for?
  2. I'm going for a single drive at this point but I also liked the orico 2 bay I mentioned above. I was disappointed when I read comments on amazon, so I'm looking for another one which doesn't have power saving issues and will keep drive as cold as possible and to be able to handle 24/7/365. For example: https://www.skroutz.gr/s/21201499/Ugreen-THiki-gia-Skliro-Disko-3-5-SATA-III-me-syndesi-USB3-0-50422.html https://www.skroutz.gr/s/3997213/LC-Power-THiki-gia-Skliro-Disko-3-5-SATA-III-me-syndesi-USB3-0-LC-35U3.html https://www.skroutz.gr/s/25375207/Orico-THiki-gia-Skliro-Disko-3-5-SATA-III-me-syndesi-USB3-0-7688U3-EU-BK-BP.html https://www.skroutz.gr/s/29466186/LC-Power-THiki-gia-Skliro-Disko-3-5-SATA-III-me-syndesi-USB3-2-LC-35U3-C-HUB.html
  3. I will get a red plus which is cmr type. Thankfully, I have several wd drives for many years and never had any type of issue. Do you recommend any case for my scenario?
  4. I'm looking for a case for wd red drive to plug into a pc(lenovo m700), for seedbox purpose. It will work 24/7/365. I have seen https://www.skroutz.gr/s/32131424/Orico-THiki-gia-2-Sklirous-Diskous-3-5-SATA-III-me-syndesi-USB-3-0-DS200U3-EU- BK-BP.html but the comments are a bit discouraging, since they say that after spin down, to save energy, it either takes 5 minutes to get up again or it needs to be switched off and on(several comments on internet). Also, I'm interested in keeping the drive as cold as possible. Does anyone have a similar situation to recommend a case? Mostly, I search on this local site: https://www.skroutz.gr/c/667/hard-drive-cases/f/597478/3-5.html?lang=en&order_by=popularity&order_dir=desc
  5. I'm thinking to disable power saving and check. Otherwise I don't see any other options. Weird thing is that there is not "power management" tab for most usb controllers in dev manager. There is only for "USB Root Hub(USB 3.0).
  6. My mb is b450 tomahawk. I got an orico ssd case with usb 3.1 gen 2. When I boot it from the rear usb-a or usb-c it hangs 9/10 times(usb i/o led keeps flashing) so I hard reboot the pc. When I boot it from the front panel usb 3.0 it works fine. Also those rear usb ports work fine when I don't boot os from them. Any ideas?
  7. I have suddenly the same problem on my 870 Evo.It was ok a couple of weeks ago. I have also a 860 and a 850 and write speed is fine. 870 860 850
  8. I have the same problem. I have a 850, 860 and 870. All 3 show the same. However, read/write speed is the advertised.
  9. I got a glitch while entering "The Foundry" and Karn disappeared so I can't go on. I'm looking for a save file on default difficulty, lvl 10 which is saved before entering "The Foundry".
  10. I m looking for a 2 bay hdd enclosure not above 60-65 €. I will use it only for storage. Not raid. I read the reviews of some icybox but they seem to have issues. Maybe only on raid? I don't know. Any suggestions?
  11. It does as 2nd slot is covered by the cooler. https://www.neoseeker.com/Articles/Hardware/Reviews/be_quiet_dark_rock_3/4.html Same is mine. I use lpx at the moment.
  12. Hi I m going to change ram sticks and I would like to know if someone has tested dark rock 3 with these ram sticks. Motherboard is b450 tomahawk. The cooler is mounted horizontally. https://www.skroutz.gr/s/8855213/G-Skill-RipjawsV-16GB-DDR4-3466MHz-F4-3466C16D-16GVK.html https://www.skroutz.gr/s/11436424/G-Skill-Flare-X-16GB-DDR4-3200MHz-F4-3200C14D-16GFX.html https://www.skroutz.gr/s/7806069/G-Skill-TridentZ-16GB-DDR4-3400MHz-F4-3400C16D-16GTZ.html
  13. I will go that way too, I guess. I'm just searching displayfusion options and if I find anything I will post. Thank you.
  14. Do you know how to change on which monitor these games could run?
  15. Is this option available in 3rd party software like displayfusion? I don't like the main taskbar on all monitors.
  16. I have added a 3rd monitor. I will use it only for gaming so it won't be powered on all the time. However, I have set it as display number 1 because I have some games that cannot change on which display they will run as there is not such option in the in-game menu. So, when I power it on, the main taskbar(the one with the buttons) goes to that monitor and I have to drag it on the second monitor. How can I set it to be on the 2nd monitor by default?
  17. Get a B550 like MSI' s tomahawk and leave SLI aside.
  18. Refresh rate of that monitor? Also there is a setting called clear type text in windows, have a look there.
  19. I mean on screen (osd). Also what's the monitor resolution?
  20. I will go for the cheaper one then. Thanks
  21. Monitor came with the same cable but it's too short. So I searched for the same but longer. I have tested the short one and it works fine. I have plugged the normal displayport on gpu and the mini on monitor.
  22. Did you change sharpeness or something like "super resolution"?
  23. Can I use both sides as input/output on this cable? https://www.delock.de/produkte/G_82699/merkmale.html?setLanguage=en It says "Input = mini DisplayPort; Output = DisplayPort"
  24. Can someone expert tell me if these settings are ok? MB is tomahawk B450 Cooler is Dark Rock 3 So all cores are set to 42.25 Vcore: 1.13V with offset -0.0125V (also tried 1.14V) PPT 150W (also tried 145W) TDC 70A EDC 120A (also tried 115A) Scalar 1x https://ibb.co/rG0yjTf https://ibb.co/1T92Lnw The only reason I did this are the high temps in stock settings(85 CB20) With PBO and offset temp is about 71-72
×