Mnpctech

nice beastly build, (bookmarked)

I like the icicles

nice beastly build, (bookmarked)

friendly fyi: I've found good deals on INTEL SSDs on Ebay

friendly fyi: I've found good deals on INTEL SSDs on Ebay

This is a very well done project log.

Progress looks good! (bookmarked)

nice selection of parts (bookmarked)

This DIY video follows the same steps in that link, cause both were created by same guy (wink, wink)
 
 
 

This DIY video follows the same steps in that link, cause both were created by same guy (wink, wink)
 
 
 

very nice! 

You can get just about any Vinyl wrap and cut to fit. @Mnpctech has a good example showcasing the H440 on his website
https://mnpctech.com/pc-mod-vinyl-wrap-graphics-modding-films-sticker/urban-winter-snow-digital-camouflage-pc-case-mod-car-motorcycle-vinyl-pc-case-mod-car-playstation-xbox-film-sheets.html
 
If you want something custom, xotic PC's might be able to do it. For copyright reasons they might not be able to replicate the Hyperbeast
http://www.xoticpc.com/graphic-wraps/
 
There's an old LTT thread about them here as well
 

Thank you for the heads up @TVwazhere  Mnpctech EVOLV front panels improve airflow, but the look is purely "purpose built" and subjective to personal tastes here, goo.gl/uNmLnb  
 
"coolest case" is entirely subjective to individual tastes, system configuration and environment. I suggest surfing newegg under the specs you need and decide for yourself what you like :-) that being said, I still love the look of the old Apple G5 cases and need to mod the one donated to me with ATX conversion, https://mnpctech.com/clearance/apple-powermac-g5-desktop-case-only-used.html
 
  
 
 
 
 
 
 
 

I'll stick with distilled water and dye, it's just easier to maintain and I can leave my PC running for however long I desire.

Thank you for the heads up @TVwazhere  Mnpctech EVOLV front panels improve airflow, but the look is purely "purpose built" and subjective to personal tastes here, goo.gl/uNmLnb  
 
"coolest case" is entirely subjective to individual tastes, system configuration and environment. I suggest surfing newegg under the specs you need and decide for yourself what you like :-) that being said, I still love the look of the old Apple G5 cases and need to mod the one donated to me with ATX conversion, https://mnpctech.com/clearance/apple-powermac-g5-desktop-case-only-used.html
 
  
 
 
 
 
 
 
 

@Mnpctech does. They're one of the only readily available aftermarket solutions for it I know of

Good job, really breaks up the big section of black around the CPU cooler. 
 
The twisted PCIe cables are bugging me though. (and the sticker on the GPU backplate. Why would they go through the trouble of making a nice backplate, only to put an ugly sticker in the middle of it?)

@Mnpctech sells Full acrylic side panels. Theyre not TG, but theyre better than the original side panel
https://mnpctech.com/phanteks-case-mods/phanteks-enthoo-primo-clear-window-replacement-side-panel.html
https://mnpctech.com/phanteks-case-mods/phanteks-enthoo-primo-clear-window-replacement-side-panel-version2.html

Wow, I really like that mini case, wonder if anyone's done a review on it yet? 
 
and good choice for the handles ;-)

The two protruding portions of the 932 side panel make it very tricky for 1st timer, My advice is mounting acrylic on outside of the HAF 932 versus inside as shown in guide above. Otherwise once you remove those protruding portions, you're left with very little material for attaching the window with 3M 4010, which becomes a problem when re-installing the panel, because the window won't it.... Hope this makes sense?
 
Here's the type of window mod I suggest (acrylic mounted on outside of panel)
 
 

Indeed!  they allow adjustment of height too, and support is rubber versus metal, to protect your GPU, https://mnpctech.com/gpu-support-bracket/
 

 
 

as an owner of the Enthoo Evolv ATX case, i can tell you it is 10000000% horrible for air flow. I have a modded front cover from @Mnpctech and a modded top from @ModMyMods-Brennen to improve the airflow. WIthout this, (On my old 6700k with a Cyrorig R1 Ultimate air cooler) my cpu temps would be in the upper 70s and low 80s when gaming and streaming. As soon as I would take the front cover off, temps would drop into the low to mid 60s. Honestly, for case reviews, I trust Gamers Nexus as they actually test the functionality of it and how impactful things are against the thermals. If you plan to air cool, DO NOT get this case. I honestly wouldnt recommend it at all truthfully. I have had mine for a little over a year now. 

@Mnpctech has a great vid for what you'll need: https://mnpctech.com/case-mods-gaming-pc-liquid-modding-custom-computer-mnpctech-overclock-cooling-fan-grills/diy-pc-case-window-install-kit.html
 
since the time lapse of productionless support, you'll have to go DIY.

Novus is great stuff, we use it on all of our PC windows
 
Thank you for the shout-out! @Enderman

I know for the PET stuff it shouldn't have any trouble as I measured it out to be around jut over 3mm but not sure about paracord and the other stuff.  
https://linustechtips.com/main/topic/582931-cablemods-new-pet-sleeving-lots-of-photos/#comment-7607865
 
My favorite would have to be the aluminum ones from MNPC tech, I've actuallly made some like this in plastic but haven't gotten access to a CNC to mill some myself. 
https://mnpctech.com/buy-stealth-cable-combs-for-pcs/24-pin-atx-stealth-billet-aluminum-cable-comb-for-single-sleeve-cable-mods.html