Glubschi

Thanks for your builds. I have a "old" Corsair 900D case, 2x 840 EVO 250GB and some older GPUs i could use for the build. I would like to have a dual CPU motherboard but just with 1 CPU for now.(upgrade when needed later) So i switched some components (i live in Switzerland and can't buy all Components that you listed). Would that work too ? http://pcpartpicker.com/p/JJDQJx

Okay thanks, yeah sounds good

I can get the HP for 1000.- and some mony for the rack would be about 1500.- without HDD thx for your help

Hey, I want to buy my a 19" Server and a 14U Server Rack. I thinking at the HP DL180 gen9 to start. What should run on the Server: -Windows Server -Plex Media Server -TeamSpeak Server -Minecraft Server -Store my Backups form 3-4 PCs - and some VM Linux Servers just to test some Linux stuff Spec: https://www.digitec.ch/en/s1/product/hp-proliant-dl180-gen9-intel-xeon-e5-2603-v3-8gb-35-servers-3233043 So now my Question: Can someone recommend the DL180 gen9 ? Can I upgrade easy in the future? Can I run WD Red HDD with SATA on a SAS Controller? Any good 14U Racks ? Should i Buy the DL360 ? or is it overkill for a HomeServer? And overall what do you think?

I want to controll all my fans from the Motherboard UEFI. I have a total amount of 14 Corsair sp120 quiet edition 3pin fans. And a Asus X99-S board. So now my question is: can 1 fan header (1A 12V) feed 4 SP120 fans (0.08A 12V) or will it burn my board header?

So if i take the older sp120 quiet edition (0.08A) it works ? I just need a option to control my total of 14 3pin fans over the MB.

But if i take a splitter with additional power from the PSU I want be able to controll the speed right? So if i just set the max. speed to say 80% it will work with 1 MB header?

Like the titel says i want to mount 4 Corsair SP120 LED fans on 1 MB header with a spliter. I want to controll them with the Asus x99 motherboard. Will it work or will the header burn?

And a quick question for the drying. Can i put a T at the lowest part of my loop for drying? will it effect my loop? or what is the best way?

The parts are all from xspc. The rad is 46mm and the res has a Capacity of 690ml. So 3 litre would be fine?

distilled water and nothing else? I read that a loop with just distilled water have to be cleaned every 6 months? and some coolant can stay till 2 years in the loop without any issue.

Hey, I want to biuld a big loop and I am not sure about the amount of liquid i need to order? My Setup in a Corsair 900D: 2x 480mm 1x 240mm 1x CPU 2x GPU 1x D5 Photon 270 Reservoir/Pump Combo I want to buy the EC6 Coolant Clear is it good?

Okay thanks for the help.

And what about the noise on the 2. level?

I have the NZXT Kraken X61 in my H440 on top. It looks nice and the cpu is normaly about 28-30C with the i7-5820k overclocked from 3.3 to 4.5