TVwazhere

Not mine but...

*back from vacation, meme showcase*
 

Nah I think your strut has rabies.

Small, cheap and reliable; You can get two out of three, but never all three equally. You will always sacrifice one for the other two. If small and cheap are your most important factors, then your build you currently have meets those criteria. 
 
Personally I would give up some size for more reliable parts.

Pro tip: it's not a good idea to drive with a broken spring 
 
For about.... Maybe a year 

 
Fucking NY pot holes and rust. 

I bought a pressure washer over the weekend so I can use a foam canon 😂

KTC 24 Inch Gaming Monitor 165Hz Full HD 1920 x 1080 Fast IPS, 1ms 144Hz HDR Computer Monitor, HDMI DisplayPort FreeSync G-Sync, Tilt VESA Compatible Eye Care Zero-Frame 23.8 FHD 1080P Black, H24T09P - Newegg.com

Streamer Life Simulator is FREE right now on Fanatical. 79% Mostly Positive reviews on Steam... Link.

You have until April 23rd, 2024 to claim this freebie or when they run out of keys, so GRAB ASAP.
 
Developed by Cheesecake, you may have heard of their other decently popular game called Internet Cafe Simulator.

Already taken care of.
As mentioned, just report the offense and no need to make topics on it. 👍

Well since this is an already enclosed case, this isnt as relevant of a point...
 
My workstation PC at work has a single tower cooler and a very slow spinning and small rear exhaust fan with no other intakes or exhaust. The computer still functions just fine and does not overheat, especially at idle. 
 
Parts are also designed to throttle and shut themselves down well before they start melting. 

Well since this is an already enclosed case, this isnt as relevant of a point...
 
My workstation PC at work has a single tower cooler and a very slow spinning and small rear exhaust fan with no other intakes or exhaust. The computer still functions just fine and does not overheat, especially at idle. 
 
Parts are also designed to throttle and shut themselves down well before they start melting. 

Well since this is an already enclosed case, this isnt as relevant of a point...
 
My workstation PC at work has a single tower cooler and a very slow spinning and small rear exhaust fan with no other intakes or exhaust. The computer still functions just fine and does not overheat, especially at idle. 
 
Parts are also designed to throttle and shut themselves down well before they start melting. 

Amazon.com: Zoom Dynamic Microphone for Podcasts, Voice-Overs, Interviews, Vocals, and More, High SPL Capability, Sturdy Metal Body, and Large Diaphragm : Musical Instruments

Well since this is an already enclosed case, this isnt as relevant of a point...
 
My workstation PC at work has a single tower cooler and a very slow spinning and small rear exhaust fan with no other intakes or exhaust. The computer still functions just fine and does not overheat, especially at idle. 
 
Parts are also designed to throttle and shut themselves down well before they start melting. 

Yes, but I was more referring to getting it back out (which can of course also be accomplished by pretty much any pliers you can find, but if you want to use a screwdriver, sockets are the way)

You can use any screwdriver with a size 4,5 or 5 hex nut socket to remove standoffs.

Hello friends,   I'm starting a new project and it's time to start this year with a dynamic PC mod/build. The project will be dedicated to GT sports cars, the interior will be associated with the engine under the hood of the car, and the exterior, of course, in the bright colors of speeding cars    This is my new "office" machine. Yes, it might sound funny, but I have to please myself too!   Hardware:   Raijintek PanSlim case Asus ROG Strix Z690i Gaming WiFi motherboard Intel i9 12900k Asus ROG Radeon RX 5700XT graphics Patriot Viper DDR5 Elite5 48G 6600Mhz RAM Patriot Viper VP 4100 1Tb m2 Cooler Master SF 850W power supply Cooler Master SF 120M fans EKWB 2x Surface S240mm slim radiators EK-Quantum HDC Titanium fittings EK-Quantum Velocity² DDC 4.2 PWM D-RGB CableMod custom cables for PSU etc...   Photo teaser and let's go.....      

It's totally fine 😂😂😂 Everyone on this forum has had one of those moments at some point (myself, many times..... dont ask me about "solid" heatpipes...)

It's totally fine 😂😂😂 Everyone on this forum has had one of those moments at some point (myself, many times..... dont ask me about "solid" heatpipes...)

Amazon.com: Google Pixel 7 Pro - 5G Android Phone - Unlocked Smartphone with Telephoto/Wide Angle Lens, and 24-Hour Battery - 128GB - Obsidian : Cell Phones & Accessories

256 is $35 more and 512 is $85 more

It's totally fine 😂😂😂 Everyone on this forum has had one of those moments at some point (myself, many times..... dont ask me about "solid" heatpipes...)

Autodesk Fusion is a toy compared to Autodesk Inventor.
Is it nice? Yes.
Do you need Inventor as hobbyist? No.
 
Autodesk Fusion is probably the best bet for free hobby use.
Solidworks Maker edition for $50/year would be the alternative. 
 
If you are student there is Siemens SolidEdge which is similar to Fusion360.
 
Youtube has dozens of tutorials.  Select the one you like.

Fusion360 is free for home users. Its a great tool to get started imo. TONS of tutorials online and UI is fairly easy as per Autodesk fashion. You can import STL files into it too.

lmfao, ermmmmm i dont think the strix will fit, maybe try a different case sorry
 
 
 
🤣

I huh...I...😐 I totally noticed that.......(not)...............
Imma go put on my dunce hat.