Jump to content

AmbellinaThePrise

Member
  • Posts

    122
  • Joined

  • Last visited

Everything posted by AmbellinaThePrise

  1. Okay, so I applied the TPU II settings in my ASUS ROG Maximus IX Z270 BIOS as I'm new to overclocking and figured this would handle it fine, but I wanted to ask anyway to err on the side of caution. I'm running at 4.9GHz on my i7 7700k, being cooled by an NZXT Kraken x52, and it in the CAM software it is showing VCORE of 1.38v, that in 5 minutes of Prime 95 went up to 1.41v max, and my temps were reaching a maximum of 89.75c averaged between the cores, with the two hottest cores both hitting 96c. That seems high, and I'm assuming some of that is to do with the voltage, presumably. Would it suit me better to overclock manually and have it run at a lower voltage? Does the ASUS auto overclocking get a bit liberal with voltage? Or is that just the lowest stable voltage my chip is able to run at?
  2. Updating: I cleared CMOS and it is still doing the same thing. I'm beginning to think it could be one of two things, not that I have the most knowledge on this kind of thing... But I'm thinking either a.) failing CMOS battery or b.) Drive issues. I noticed yesterday that one of the sata cables to my HDD was kind of loose, but I plugged it the rest of the way in and that didn't change anything. My OS is loaded on my SSD anyway. I'm really not sure what the deal is, but I, against my better judgement have been continuing to use the PC daily since this issue and it is still working fine. Nothing out of the ordinary to be noticed except for this issue. But surely it has to be something wrong with the system in some way, especialy considering that it wasn't doing this for almost the entire first week. Again, I must also note that used the ASUS ez update to update the motherboard BIOS, along with other updates along the way. I also dealt with some issues with the latest AMD drivers giving me black screen issues with my 390, so I ended up rolling back to the previous drivers there, but only after using DDU. I had to have screwed something up somewhere..
  3. i7 7700k, ASUS ROG Maximus IX Hero, NZXT Kraken X52, Sapphire Nitro R9 390, GSkill Trident Z 2x8GB, WD Blue 1TB drive, and a SanDisk 240GB Ultra II SSD all plugged into an EVGA G3 750w PSU.
  4. I haven't, but I will try that and see if that helps. Before I do though, this motherboard has a clear CMOS button on I/O. Any chance that would do the same trick, effectively?
  5. Okay, let me explain here. I just built this PC, being my second build so far, about a week ago now. The past couple days I have been dealing with this problem where if I shut the computer down, sometimes the first boot after a while will make it to the windows loading screen, then power off. But when I power back on immediately after, it boots up just fine. I can't place what's causing it, as I've checked for any lose cables, reseated my RAM, and in general checked any issues I could think of it being. Once it does boot it runs with absolutely no indication that anything is wrong, with the exception of my CAM settings defaulting, but that is the fault of the CAM software and not really tied to this issue, I wouldn't think. Any ideas?
  6. Kind of what I was planning on unless someone had another method of fixing the issue.
  7. I have tried both that and DDU to remove everything and install fresh and neither of these resolved the issue, unfortunately.
  8. To try and keep this as short as possible, every time I uninstall the previous drivers (16.11.5) and try to upgrade to the latest driver, or any Crimson ReLive version, my computer will boot as normal on the first attempt, but after roughly a minute, sometimes less it will cut out and go to a black screen and the sytem freezes up. on reboot the screen will still be black. Only way I have been rolling back has been booting it using the iGPU and uninstalling the ReLive drivers. I haven't, and currently cannot reinstall windows, as I lost my activation key and the thumb drive in a move, the 390 is still with me from a previous build that had two power supplies fry in it due to some issues with wiring in my previous house and multiple power outages. I'm fearing that if it's not the driver itself, then it's something off about the card. But with the 16.11.5 drivers still working perfectly for me, i'm not really certain what the actual problem would be. Has anyone else had and resolved this issue? Is it possible that a fresh reinstall of windows would fix the problem?
  9. The Ryzen 7 1700x loses out 3% in single threaded processing to the i7 6900k, and quite a bit more compared to the 7700k. It seems that Intel is still the way to go for purely gaming or light productivity. But if you want a powerful CPU for professional work and heavy content creation, it looks like Ryzen is the way to go. Sad though, I was hoping for the 1700x to compete closer with the 7700k to actually be more viable for gaming.
  10. 60% with Gateron brown master race. Haha
  11. I mean, if it's doing fine at 1440p in GTA 5 and SW:Bf then it's quite clear that at 1080p, where this card would mostly be used, then I would agree that it is the better choice for the gamer on a tight budget. At that point you have to wonder if all the pushing for the AMD cards because of Freesync makes any sense at all. If you're on such a budget that you can't put forth the extra money for the negligible performance increase of the 6GB, then I would doubt buy a monitor more expensive than your GPU is a wise decision either. And that's coming from someone with the performance equivalent of the RX480 (R9 390) and a Freesync monitor.
  12. KBParadise V60GTR with Gat browns. The keycaps are NPKC PBT front-print caps bought off eBay to get somewhat close to the popular Miami set, but without the legends on the top. The pinks didn't end up quite as vibrant as I had hoped, and are more pastel than anything, but in the end I'm okay with that. The Gat browns are incredibly smooth, and the bump does seem a bit more noticeable than the cherry MX counterparts. Exactly what I needed after I fell out of love with the blues on my Logitech G710. I also put some 50A .4mm o-rings on to even further reduce noise, but now it may be too quiet. I'll give it a week before deciding whether to keep them on or not. Side note: My mousepad and keyboard respectively grew and shrank quite disproportionately. I went from the G710 full size with macros, and a Roccat Taito control mid-size to this V60GTR and a Glorious PC Gaming Race 3XL mat, and it is one of the best changes I have made to my setup so far.
  13. So is the Asus ROG Strix not recommend? I'm looking into one for a second build and I'm wondering which one to get. Trying to go with a white and black color scheme, so the MSI gaming X would not be a great option.
  14. I quite like them. If noise is a problem get a board with browns and some o-rings for the keycaps. Still get a little bit of that tactile bump but no loud click.
  15. If the graphic is textured then I could see why it might. Otherwise, no.
  16. Pok3r RGB can be had for $140 with your choice of Cherry MX RGB Red, Blue, Brown, Red, Silent, Speed, Black, or Nature White. If you want a 60%, that seems like a no-brainer to me. Unless of course you don't care for RGB lighting and would rather swap out keycaps. Then I would recommend a KBparadise V60 mini with Gateron browns.
  17. G810 for build quality alone. 410 feels very cheap, very flimsy.
  18. If you haven't bought one already, I have a Corsair M45 I can send you free of charge if you want it. It's a very nice mouse, but I bought a Logitech G403 recently and prefer it's shape. It's about 6 months old, and as such the textured grip on the side has worn smooth from heaps of use in CSGO, but you can always rough it up again with some sandpaper
  19. Logitech G403 prodigy. It's like a shorter, more comfortable Razer Deathadder, with the same sensor as the G502. Everything you need, nothing you don't. I had the Corsair M45 before this and it had a nice sensor and weight, but the shape was kind of weird for me.
  20. Another vote for the Logitech G Pro.
  21. I was going to suggest the G403 prodigy, but the G502 is great as well. Just a little on the narrow side for me. Good that you're happy with the 502.
  22. My personal recommendation would be to get a KBparadise V60 with the Matias quiet click switches. Very quiet tactile switch. not the same keyboard, but definitely the same switch. The V60 isn't really a "gaming" keyboard, in that it has nothing marketed to gamers such as macro keys, lighting, or specialized actuation points, but most of that is nothing more than marketing anyway and has little effect on in game performance. If you want a quiet, great feeling mech switch, it's hard to beat these. In terms of noise levels, the the MX silent is great, but I can't speak for them since I have never used them, and don't know how they feel. The G810 Is a good choice too, if it is an upgrade build quality wise from my G410. The romer g is quiet, and there is a bit of a tactile feedback to them, but it just feels like a softer membrane keyboard in that regard because of the bump being so much at the top of the keystroke. The G410 was a bit on the flimsy side, which made bottoming out feel a bit mushy, but I hear that the G810 is much better in that regard. So for my 2¢, the G810 is your best bet if you want a switch with a high actuation point, relatively low noise levels, beautiful RGB lighting, and media keys. If you really don't care about that, and don't mind hunting one down, go for the V60 mini with the Matias quiet clicks. A little noisier, but not all that bad is my personal end game, the pok3r RGB with MX browns and .4mm o-rings.
  23. https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1375 My personal suggestion. I had one for a week and really enjoyed it, but I sold it off to help pay for a pok3r RGB.
  24. 1060 = 1080p 60Hz monitor 1070 = 1080p 144Hz monitor or 1440p monitor
  25. Unless you have a 100+Hz monitor, or plan to get one/upgrade to 1440p in the near future the 480 is absolutely the more logical step.
×