Jump to content

gijoe50000

Member
  • Posts

    42
  • Joined

  • Last visited

Awards

This user doesn't have any awards

gijoe50000's Achievements

  1. So I recently got a new Neo G7 monitor which requires me to use the single HDMI port on my RTX3080 to get the 4k, HDR, 165Hz signal to the monitor. The DisplayPort 1.4 just can't seem to handle that. This means I have no way to send another HDMI signal to my receiver for audio (I'm temporarily using the optical connection for sound). My receiver only has HDMI 2.0 so it can't do full passthrough. I've been looking for HDMI 2.1 splitters, but the vast majority of them are switches, and not splitters. I've only seen 1 genuine splitter so far and it's about €150. Anybody know how I can get HDMI audio to my receiver without paying ridiculous money for a splitter? Would a DP to HDMI cable do it? (I've heard contradicting reports on this) Or a HDMI card? (Is that even a thing?) Or any other solution that you can think of? I've also heard conflicting reports that DisplayPort 1.4 can actually handle 4k, HDR, 165Hz, but it doesn't seem to work for me. (could it be a cable issue?)
  2. Not really sure if this is the right place for this issue, but anyway.. The problem is that when I play music on my PC it cuts out when the display goes to sleep. I have my monitor connected via display port, and a receiver connected via HDMI for my audio, both from my 1080ti. I'm assuming that Windows just shuts down both of these ports when the computer decides to go to sleep, not knowing that I want the HDMI port to continue playing audio. Is there any way around this? I have an x570 motherboard and a Ryzen 3600 so I'm pretty sure that the HDMI port on the mobo is useless. I know that I could just set the display to never sleep to solve the problem, or just switch over to the optical connection whenever I want to play music and walk away from the PC, but these are a little bit inconvenient. It would be nice if I was able to prevent the HDMI port from sleeping. Anybody know a way to do this? A registry hack, an app or program? Or some setting that I'm not aware of?
  3. So, I've got my new-ish Atmos receiver (5.1.2) plugged into my 1080ti on my PC via HDMI, and I just use it to run audio. I use the display port for my display. I used to generally use the aforementioned app to run sound to the receiver (right click on the sound icon in the taskbar and select Speaker Setup) but then today I just selected 7.1 instead of "Dolby Atmos for home theater"; and I set the sound in the device sound properties to 24bit, 192Khz and I still get Atmos when I run an Atmos movie. The Atmos light still comes on on the receiver when I play an Atmos track. I find that without using the Dolby app I no longer get the annoying 2 second silence when I open, or even unpause, a movie. And the sound seems to be just as good. The sound used to also disappear sometimes using the "app" if I paused a movie for too long, and I'd randomly have to change some setting, and change it back for it to pick up the sound again. So is the app just (worse than) useless? Does it serve a different purpose, like for some different setup or something? (Besides them trying to get money from me for Atmos in headphones!) I do have 2 ceiling speakers, so am I now running 7.1 instead of 5.1.2? Or is the receiver just taking the signal and doing the proper "Atmos stuff" with it? Or am I correct in assuming that the receiver is doing the proper Atmos stuff through HDMI? It's pretty hard to find much information on receivers and PCs.. everybody who uses a PC seems to just use headphones or little desktop speakers!
  4. Goddamn, never mind. It's just the folding at home app preventing it from going to sleep.. Guess it should be folding instead of sleeping anyway..
  5. So when I try to put my PC to sleep all I get is the monitor going to sleep, but the PC itself stays on. Lights, fans, etc. This has only been happening for the last few days and I haven't made any changes. It's kind of weird, and really annoying. Anybody know what's going on?
  6. The board I have on order is a TUF X570. It has a few 3.2 Gen 1 & 2. I assume they're the 5 and 10 Gbps respectively.. I suppose that's more than fast enough for copying a few songs and word documents, and the odd few movies!
  7. Nice one, I never even thought about sticking an nvme into an enclosure. Yea, that renaming thing is a total disaster. Not only because of the big long confusing names, but also because you never know if an article has been updated after the names changed, or if it's between the first and second renaming, and especially when they don't use to full total complete name, along with a date beside it. When browsing that Amazon link for example I found myself just totally ignoring the names, and looking at the Gbps. Whoever is in charge of usb naming/renaming needs to be shot. I don't do a lot of transferring so I probably won't end up getting an nvme and an enclosure, I'll probably just pick up a cheap 64GB usb or something, but I'll keep it in mind. I just wasn't sure if all usb 3.0 were equal or not. I'm doing an x570 build next week, when the parts arrive, so I was curious about the usb 3.2 gen 1 & 2 ports on it, and what type of flash drive to get, when I pick one up. I don't think type C is common enough yet to be worth the bother.
  8. Oh right. My first thought was what's the point then? but I suppose there's also pcie gen 4, and there's nothing that can really utilise that yet either. So, yea. I suppose faster usb sticks will come out eventually then. Thanks.
  9. Ah right, thanks. So does this mean that for fastest usb speed I'd need to get a usb 3.2 stick? Do they even exist?
  10. I've been searching online for about an hour now, and I still have no idea how all this works with usb 3 flash drives. I know a flash drive obviously won't run faster than the port speed, but is there such a thing as a USB 3.2 gen 2x2 (did I get that right?) flash drive? Or does any usb 3.0 flash drive just work at the speed of the port it's plugged into, even if it's a 3.1 or 3.2 port, or whatever they're called today? Like, if I buy a usb 3.0 flash drive and plug it into a usb 3.2 gen 2x2 port will it run at the 3.2 speed?
  11. So I just noticed, for the last day or two, that one of my gpu fans seems to be ramping up for no reason.It's a 1080ti MSI Gaming X.My GPU temp is usually only about 30-35c at idle, but lately the fan ramps up to, I'm guessing, 50-70%. I don't know exactly, because the speed is not being shown. It's like the fan is ramping up by itself, independent of temps or fan curves.I think, also, that it's mainly just one fan, the one closer to the front, if that makes any difference. Last night for example, my fans should have been stopped (<60c) but the front one was running quite loud while the rear of the two was stopped. Another time both were running on manual, like 30% just for testing, and I manually held the back fan with my finger to stop it, and then the front fan took off up to 60-70%.Same issue with several versions of Windows 10 Insider Preview. And with the 430 and the 435 (comes with Windows) drivers. I run Afterburner and Speedfan, and have had the same versions for a while now, but even with these closed it still ramps up. I took the card out yesterday, gave it a look over, and reseated it, but it's still happening Anyone know what's going on here? It doesn't seem to be a temperature issue, or a temp sensor problem. Right now, I have the fan speed set to 25% on manual, in Afterburner, but it sounds like it's running at about 70%. It's quite annoying.
  12. So I have given AI Suite a go for the last week or two. I thought I'd give it the benefit of the doubt. I ran the auto overclock, or 5 way optimisation or whatever it's called. It ended up at 4.5Ghz @1.312V. It didn't even crash and reboot once, it's like it just set some random oc, gave it a bunch of voltage, and restarted. lol. I immediately set the voltage back down to 1.22v and all was well again. Stupid thing keeps setting my core voltages up to about 1.264, and 1.248, though, even though I manually set the core voltage 1.22v. It also displays the cpu cache voltage as 1.22v, even though it's set to 1.05v, just above it. Maybe it's some setting like LLC, or some "turbo" setting that I'm unaware of. I think I'll just get rid of it and do everything in the bios. I do like the idea that it actually sets your settings in the bios too though. That should, in theory, help speed up your overclocking as you don't have to be going in and out of the bios all the time. But I'm still sceptical. Like most here, I usually like to set my settings in the bios. Then I know they're "set in stone", and that some other stupid program isn't going to be doing whatever it wants.
  13. Feel free to skip the story if you just want to answer the question.. I had a no POST issue on my old Gigabyte z97x board, and 4790k, for about 2 years, it kept getting worse and worse until it wouldn't POST at all, maybe once every 60 times it would POST, but once it POST'ed everything was fine. I switched back to my old FX8350 for a while. So eventually I picked up an ASUS z97 Deluxe on eBay with a 55 error, for €25, to confirm it wasn't the cpu.. cpu's never die, right? I had a sneaking suspicion that the 55 was not a permanent fault, just somebody using faulty memory, corroded contacts, or tightening the mobo screws too much, and so they rma'd. Anyway, it turns out the board is perfect, I initially got one or two 55's, but after reinserting the memory a few times and some general wiggling it was perfect. and new, all the wrapping on the NFC, Wireless charger etc.. Score! But it had the same problem as with the Gigabyte board, No-POST. Thought I was done for, as the cpu was a few years old, but I decided to check my cpu purchase date and warranty anyway for the hell of it, and I had a week left of the 3 year warranty, phew! So I rma'd the 4790k, after passing the first level Intel boss who claimed my warranty was invalid, (That was easy, just an indignant reply about how I expected more from such a large company as Intel.) Got the spanking new 4790k within 4-5 days and I got the ASUS up and running, no problem.. Well chuffed! (I know it's old now, but it's a hell of a lot better than the FX8350.) So, on to my question: Does anybody use the ASUS AI Suite? For power management? Overclocking? Fan Control? Anything else? I've never really trusted motherboard manufacturer software.. maybe just because Gigabytes stuff looks horrible, rushed, and always crashes and glitches.. The ASUS Suite seems OK, but I'm still reluctant to overclock using it. I do prefer using the bios as I feel like it's more "permanent". Desktop software can crash, not load, uses additional resources etc. But, I'm open to listening to what others think. I mean, maybe desktop overclocking is handy because you can adjust on the fly, test it quicker, and turn it on only when needed? What do YOU think?
×