Anime4000

I have tried to increase VCCIO/MC up to 1.25voltage at 3200MHz 24-22-22-52-74, T1 and T2, GearDown Disable and Enable. With that settings, memtest86 still give an error: The four stick RAM glitch trigger BIOS corruption, this glitch are harmless as UEFI using buggy 4x RAM and cause RAM corruption highest stable is 2400MHz @ 17-17-17-39-55, T1 @ auto DRAM voltage (1.35v) Could be this earlier RAM stick I bought is having different DRAM Chip (1 piece SpecTek vs 3 piece Samsung) cause stability issue even Part Number is same?

I have tested, 4 stick at 2400MHz & 1.35V is most stable! 2666MHz and memtest86 give no error, but booted and VM still keep crashing despite memtest86 reported no issue Yea, just dumb RAM. Just increase +.1 voltage at CPU VCCIO/MC ?

I believe 5302 as yesterday I update before installing new RAM After update, confirmed bios version 5302

Understood, I try lower RAM Clock from 3200MHz to 2166MHz. At this time, I just run memtest86 on all 4 stick to find which RAM Clock is the optimal

I have a PC that runs Proxmox, spec are: CPU: AMD Ryzen 5 3600 RAM: 128GB (32x4) A-DATA 32GB 3200MHz (AD4U320032G22-SGN) MB: Asus ROG Strix B450-F Gaming SSD: 500GB NVMe WD Black (WDS500G3X0C-00SJG0) Before, I run with single stick 32GB at 3200MHz no problem, using A2 slots as recommended by User Manual: Yesterday I bought 3 more RAM with same Part Number When run, I keep getting error about SIGSEGV 11 every VM/LXC Then I start run memtest86 on all four stick, got issue... So, I begin process of Elimination: 1. I run test single stick at the time on each slot... (It appear each stick I have is fine) 2. Then I add 2nd stick, also no issue, 3. Then I add all stick, suddenly no issue: Now I confused, restart the PC and I proceed to boot Proxmox, then SIGSEGV happening again... Some VM are out right Kernel Panic and crash: I a bit stressed about this RAM, Then I ran memtest86 new RAM on my main rig (Ryzen 9 3950X, Asus ROG Crosshair VIII WiFi), Confirmed the RAM I bought recently and long time ago are indeed working... No Windows Blue Screen, even load Facebook Llama A.I. into RAM that max out ~120GB RAM I go back to my PC server, run two stick, no issue Only happen Kernel Panic and SIGSEV when I use all four stick, what this does mean, 32GB x 4 is too much for Ryzen 5 3600 ?

Understood, I noticed pixel like this: Rgb rgB, where gb rg sub-pixel is off making huge black void... This mean all LCD monitor will behave like this? It's possible to have LCD display without black void like this?

Massive void when Red and Blue, but not Blue and Red... Like this, I do in mspaint.exe to simulate black line when Red and Blue by side: Monitor I use: https://store.acer.com/en-my/nitro-xv272u-p

Yes, part of domain that I setup and I disable BitLocker related GPO settings, Other computer that joined didn't force BitLocker, only this particular Laptop being BitLocker automatically

Regarding my previous post, many don't believe BitLocker can automatically encrypt partition without user consent. 1. I restore image as usual, I create a image in VM without BitLocker! 2. After restore image, boot Windows (first time run) and boot to Macrium Reflect to verify partition, BitLocker has enabled! 3. Confirm Partition is Encrypted without my consent!!! 4. BitLocker says what? When I attempt to Data Recovery, both Partition are unreadable! Lately many new computer that I rent out to Government are getting an issue where cannot Boot Windows, I believe Windows Update doing BIOS Update cause TPM become invalid, this very horrible SysAdmin experience where user data are lost. Plus no access to Cloud Disk. And NO ONLINE ACCOUNT, all user login own ID (Domain AD)! New system come with Forced BitLocker, I wanted BitLocker is permanently disable, how?

On that time, I know I did not set BitLocker, especially to Noob Users, so, I proceed it without checking it first. Apparently no warning, I been contacting local Microsoft Regional Office, they said try login into Microsoft Account and get recovery key there. But I setup my friend PC using Local Account and have been this way since then!

That BIOS date for version 4301, trying to update to version 4402 https://rog.asus.com/my/motherboards/rog-strix/rog-strix-b450-f-gaming-model/helpdesk_bios

I checked, BitLocker partition are: 1. PNY XLR8 CS3040 500GB (Boot, Windows, Users) 2. PNY XLR8 CS3040 1TB (Steam) Other HDD are in normal partition. I don't think he or someone purposely lock his drive

Yes, PC cannot boot, asking for BitLocker Recovery Key like this: I using Macrium Reflect to restore "sysprep" Windows 10 Image that I made in VM, which is I never set BitLocker in first place!

As per title say... I build a gaming rig for my friend long time ago, story it begin with: 1. Last month I believe, I guide him to enable fTPM in UEFI BIOS since he want his PC ready for Windows 11 2. Yesterday I guide him to update UEFI BIOS When his PC boot, asking for BitLocker Recovery Key... I using Macrium Reflect to restore "sysprep" Windows 10 Image that I make in VM, same Image I use for my self and other my customer. This one of his picture send this, I ask him to proceed as I know I never set BitLocker neither him Thing is, suddenly BitLocker was enabled, I believe fTPM cause this. There is way to recover from this? Also... how to prevent BitLocker Automatically after TPM enable? or simply Disable/Delete BitLocker entirely, just make life easier

No, my fan does spin and very loud, the RPM reported is correct, but fan % stay at zero. it seem has not temperature detection or fan curve when GPU over 35°C, Fan start spinning over 4000 rpm when GPU under 34°C, Fan not spin. both tell 0%, in HW Monitor, MSI Afterburner, other Utility...