hambobolubia

not sure if capitalization matters but line 1928 folding name should be Hambobolubia 

GPU folding isn't supported on MacOS
https://foldingathome.org/support/faq/installation-guides/mac/requirements/
You'll need to set up Boot Camp so you can run Windows.
Also thermals is an issue on laptops, especially on that i9 MacBook. Keep an eye on temps.

This and here are some genreal tips for F@H on a Mac. (I am writing this on a 2019MBP14" on 100% thrust F@H)
 
1. Especially on this i9 guy make sure your MacOS is up to date!
 
2 Thermals: Best and free fan control unititly for the Mac. Works on bootcamp and MacOS:
https://www.crystalidea.com/de/macs-fan-control 
I suggest setting it at full blast and propping up the Mac a bit form the table so it can pull air in more easy. This helped me a bunch. Also make sure to turn of the display but diesable sleep when plugged in.
 
3. Monitor your CPUs Power usage, temp, speeds etc. Works on Mac and Win:
https://software.intel.com/en-us/articles/intel-power-gadget
 
Most important: do a boot camp and F@H there! GPU>CPU most of the time.

if you want to use it just like an arduino you will have to load a bootloader witch will communicate with the arduino IDE. the best way to do this it normally to use the ISP header (i would suggest you add this to your board) using another hardware device called a ISP programmer witch can be found online fairly cheep or you could build your own using another arduino. once the bootloader is intsalled it will enable your usb port and you should be able to upload a Sketch using the arduino IDE.
here is a link to an old ben heck video that should help https://www.youtube.com/watch?v=ncobWc61wL4

alright here is my final model the demisions are exact so there is no slop for printing (you will have to do a bit of sanding) but all of the angles match up let me know what format you can open in 123D because im using solidworks. you should be able to open the .x_t file if not let me know

2.5in hdd tray.STL
2.5in hdd tray.x_t
2.5in hdd.SLDPRT

To connect the sleds together? I don't think.  I did it by hand 

No problem any other questions just ask

not quite sure what your asking... no your not keeping me up im on the east coast and had nothing to do.... yes its early but meh

alright here is my final model the demisions are exact so there is no slop for printing (you will have to do a bit of sanding) but all of the angles match up let me know what format you can open in 123D because im using solidworks. you should be able to open the .x_t file if not let me know

2.5in hdd tray.STL
2.5in hdd tray.x_t
2.5in hdd.SLDPRT

try setting up a VNC server after a quick google i found https://www.realvnc.com/ this may not be the best option but it should work for you i use a linux vnc server to remote in to my raspberry pi. i can even do it from a android phone. good luck

I have a copy of just cause 2 id like to give away (humble bundle gift link) this will be a random draw and will be drawn in about a hour from when this was posted to enter just comment saying your favorite game or server happy commenting
 
 
 
edit the game will be redeemable on steam