BeyondRico

After trying what you did I got the same result. first tried is without any components then with components(should not make a difference), i even bought a new motherboard just to test if this was not the problem. i do have to say that my psu only has an 8 pins cpu connector but the motherboard has an 8 pin and the 4 pin connector. after some research i found multiple posts saying that the 4 pin is only necessary when trying to overclock the cpu(I am not going to). i have literally no idea how to fix this problem

did the ez debug led for the cpu also stay on after you flashed it 2 times? it stays on on my motherboard

They took v17 out of beta so it's a full release now but i got the same result. is this the version you where talking about?

and by old version which one do you mean because the version before the official support also mentions the support for upcoming AMD cpu(see picture)

Hi, Today I was building a new pc for a friend, I ordered the Msi b450 gaming pro carbon ac. On the support page under the bios section there is an bios update that should support gen 3 of the Ryzen series. I flashed the bios with the bios flashback feature on the motherboard because the motherboard did not support the newer gen cpu out of the box. However it did not change anything, when trying to boot the pc it turns everything on but does not show anything on the screen. Also the cpu led on the motherboard is on. does anyone have an idea how i can fix this or that the motherboard is just broken and i have to get it replaced.

is it available in the netherlands?

the os is fine the only thing is those encrypted files. so i need to decrypt them that's it

oke thanks anyways. i hope they will find a way to decrypt those files

on some other forums i found a program that could decrypt those files. only the link is not working anymore(this is the other site).

it's not my pc so i know they should have made a backup, but it's too late for a backup now..... anyways i am going to wait and hope there will be an decrypter soon

i think it's not that easy, all those files are locked with a RSA-2048 and AES-128 encryption.

hi there, So someone out of my family just called me to tell that his pc was having a virus. the virus is deleted now but all his pictures and word documents are encrypted with a .locky extention. does one of you know a way to decrypt those files, there is no backup so i would love if someone could help me with this problem.

Thank you very much, I hope its a faulty keystone as well.

yeah the cable is about 3 meter long, so this should not be a problem. And about the electrical cables they are about 1 meter away from the cable so i think this isn't a problem aswell. I think i will contact the company where i bought the keystones, to change the product to a working one. Anyways thank you for helping me so far.

Sorry for the late respons, i tried to change to the other keystone same results.

i don't have loose keystones they are already mounted in the bracket that goes inside my wall it looks like this: and in here i punch the cables:

yes i cut the end off and started again, i don't know what mecs are too be honest. and yes the cable tester said the cable was all good but my PC still disconnected shortly after

I am using this device: Master NS-468 it is also the second time i connected the cables to the keystone, last time i made it like you told, same results.

it lookt strange on the way the colors are aligned. but the number beneath them are correct. so don't mind them

yes this cable is also working

oke i will do that one moment please

they are keystones so i needed to punch them in there with a lsa tool. and the cable tester gives me good results so i am pretty sure the cables are connected properly

Hi there, so recently i made a cable from downstairs to my room upstairs. i am from europe so i needed the b standard. I plugged al the collord cables in position, after i did this up and downstairs i tested the cable with a cable tester. this device showed me that the cable was working properly, so i mounted the keystones on a wall mounted bracket and closed it up. connected the main cable to the router and connected my pc on the other end. when i do this it makes connection and after 15 sec it disconnects and says there is no cable detected. this is the second time i connected the cable to the keystone to make sure they are all on the good position. Also my ethernet adapter is working fine tested it with another ethernet connection. does one of you guys know what is causing this problem or a fix?

Sorry for the late response, but this fixed it. thank you very mutch

yes windows is up to date, and its already installed on windows 10.