Jump to content

DTM450

Member
  • Posts

    37
  • Joined

  • Last visited

Awards

This user doesn't have any awards

Profile Information

  • Gender
    Male
  • Location
    Australia

Recent Profile Visitors

449 profile views
  1. This is one neat projector I'd use this to create a games room
  2. Ok so I need a headset that is good for gaming, music and maybe making my own and a good mic for voice overs and youtube videos Budget 150 - 200 Aud What can you guys recommend. Also I was looking at the Plantronics Rig 500E are these anygood?
  3. Ok its done the problem was that the plastic washers supplied by corsair were 2 mm to short and after replacing them with 4.5mm thick, 9mm2 neoprene rubber squares with holes I can happily say that my temps are perfectly acceptable.
  4. yeah its a little thick but looking around others have fixed the problem with a 4mm washer
  5. its not OC'ed but I'm about to add a spacer behind the cooler bracket to see if that fixes it
  6. Knowing my luck probably. I'm going to get more thermal paste and some rubber washers and try and reseating the cooler again edit Can't seem to find anywhere with the right sized washers so I'm going to get some neoprene rubber that is 4.5 mm thick to use as a spacer
  7. OK after reseating the cooler and running an export/encode, Asus Ai suite is saying my temps are around the 78-80 degree mark while HWMonitor says it's in the 80 - 90 mark
  8. Yeah I've reseated the cooler going to run an export and check the temps
  9. Looking at the bottom of the block it's not making the best contact with the CPU
  10. Ambient room temp is about 27 degrees atm and it's a corsair h60 AIO
  11. Hahaha no normally it runs at 36 degrees when I'm exporting video it reaches 92°
  12. Yeah when I first installed the cooler the screws seemed to not go that tight despite them being all the way in, I'll try reseating the cooler
×