Brandon Y Lee

Song is called: Sat Night by Yanivi

I am with you there, the less I can have on my rig the better. Regarding the SSD to CFast Kingston drives I tried seemed to be inconsistent but every Samsung drive I used was rock solid with no dropped frames I tried an 840 & 850 and had no issues. When the Kingston KC400 actually read in the reader it was also rock solid but I didn't use it much since it was so inconsistent. Honestly I think it was more the readers fault than the camera, I have seen others doing a cheaper DIY version of that reader and it working out for them. The reader is powered off the cameras battery plate through a D-tap to DC adapter, and I mounted it on the right of the camera through the rosette using the quick releases I talked about in a previous handy tech video.

Yup very true, which is why I choose to use the long Kessler kwik release plates is nearly the length of the front 1/4"-20 to the rear 1/4"-20 so it makes balancing much easier

Used BMs shoulder kit, its IMHO not very good, its great that it has VCT compatibility but it is not ever well balanced or comfortable thanks to the length of the arm for the cameras grip. We use Kessler's Kwik release plates for everything and I prefer it over VCT with the cameras we have now VCT does not make sense as a whole. That was mainly why I pointed it out because not everyone will want to use VCT nor is it always a good choice since the plates need to be so large.

If you watched the whole video you would know i did end up just using standard 2.5 inch SSDs

Relevant Information YES I am aware that Blackmagic has since Monday released a new 4.0 BETA firmware for the Ursa Mini 4.6K, but since I sent the camera back before this was out I made this video using firmware 3.3. The new firmware does add A LOT of awesome features including quicker access to controls, so thumbs up to Blackmagic for getting that rolled out. Camera Body I/O aside the Blackmagic had a few quirks that I will mention here for anyone considering on purchasing an Ursa Mini 4.6K. The first is that all the threaded mounting points on the camera are sized for ¼”-20 screws. The reason this could be a small issue for some is that most tripod plates come with a single ¼”-20 screw and a single 3/8” screw, meaning that you will need to have extra ¼”-20 screws on hand to prevent your tripod plate from twisting loose. My second minor gripe with the Ursa Mini’s body is that the power button is ONLY on the inside of the monitor. This was particularly annoying when I was using the camera handheld eventually needing to switch batteries and in order to do so I had to take the camera off my shoulder open the monitor, power the camera off, set the camera down or have someone hold it then finally change batteries. When trying to work quickly with a crew in particular this was a minor but noticeable annoyance. My third and final physical complaint is the omission of the global shutter. While I understand that Blackmagic could not make the process work with both the promised DR and the Global shutter it is a bit of a let down. The silver lining to this is the rolling shutter on the Ursa is very solid and was never an issue even when using the camera handheld. In all the work I put this camera through not once did it cross my mind that the rolling shutter made the image much worse. I consider Global Shutter to be a feature reserved for higher end cameras and there aren't many cameras close to the Ursa's price point that have it. QC Issues Like all of Blackmagic’s releases this camera has been in high demand and had a lot of people in line with pre-orders. While I can only guess, this seems to have led to difficulties in their QC process. Our unit from B&H had a small imperfection on the cameras monitor that was not generally noticeable when you had an image on screen but was definitely visible going through the cameras menus. This could very easily be damage the camera received during shipping but ether way we ended up with it, annoying. The second more pressing issue we had physically was the REAR SDI out on the camera did not work at any point in time. I tried multiple camera and full size desktop monitors and half a dozen SDI cables with no luck. This was disappointing but not something I believe Blackmagic would fix if my past customer service experience with them is any indication. This is however something that many will find unacceptable since you will be without your camera for up to several weeks depending on where you live. The last and possibly the most talked about QC issue that people have been mentioning is the magenta cast that some of the 4.6K sensors seem to be exhibiting. While I was shooting with the Ursa Mini I was using a GenusTech Variable ND filter and a Hoya IR Cut Filter since I was often outside shooting for this video and the short film. When using those two filters together I did not notice any magenta cast in any of the footage I shot, making sure to go through every shot start to finish checking for it. The corners of the frame seem to be the dead giveaway on other owners units but I did not experience such a drastic issue. That being said when I was not using the ND filter with the IR cut filter I did notice a SLIGHT magenta cast in some of my evening footage particularly at 800 ISO (Will be adding screen grabs in the morning) When I first noticed it I was a tad bit concerned however after doing a simple tint correction with in Premiere Pro (nothing fancy) I was able to remove all signs it was ever there, in fact many shots in the video originally had the slight tint and I am fairly certain you would never know it was there to begin with after colour correction was done. It is a shame others are having issues with their copy of the camera but if most currently shipping Ursa Mini’s give the images I got from the one I tested I think there will be many happy owners of this camera out there still. I do hope Blackmagic addresses this issue full swing as its one of main drawbacks being talked about this camera at the moment, but it is also something that should be fixable with time as these cameras begin shipping in larger numbers. It isn't something to brush past if you are considering this camera but if you can afford the time to correct it when it arrives the rest of the image will impress. Finally I hope you guys enjoy the video and if you have any other specific questions about the Ursa Mini 4.6k please done hesitate to ask me on twitter: @Brandon_Y_lee

Sorry I should have clarified in the video. It is in the second graphic that shows the lens circle you can see that what actually happens is the light that enters the lens (which is a full frame circle size) is focused on to the smaller sensor of my Blackmagic Camera (which is 16mm in size) so while yes it focuses more light onto a smaller place, the light still covers the entire sensor within my blackmagic. Hope that helps

I am glad you found that unboxing perfect because I did shoot that just the other day with the new set-up I fashioned together That unboxing is the first of a new batch that should be much better :) Look out for our Func MS-3 commercial coming soon that is more my element and should be rather enjoyable

Thanks for the kind words guys. I made a bad call on my 1st day of shooting unboxings to use the FS700 on a Monopod that didn't have tripod feet and we shot in blazing sunny weather with no monitor outside of the one on the camera suffice to say it was kind of hard to tell if I was as perfectly steady as I usually would be using say a DSLR which is what I am used too. I had also only just learned the cameras layout so all these things together = not a great batch of videos. But I've been working out a way to improve that and hopefully it works with the next bunch of unboxings. Keep your eyes out for our Tech Quickie commercials cause those are where I can truly have some fun with camera work; should be enjoyable. Thanks again for your constructive criticism