thrasher_565

i dont no why its safer. sounds like old gpus before 2010 didnt have safe temp were it woild self downclock to protect it. also sounds like if you oced it and then used firmark it be way too much heat. that and people used blower cards and hybrid cooling were just adding a fan to the vrm was consider fine...was not.... then there the sliing and the gap between gpus was vary small like 1/8 and sided of gpu were closed off. ya case at that time had prity good air flow and had even air floe on the side windows but was not enough. it would push it way harder then any game would for no reason. so combos of all that could be why. its posable to disable your fan curve in msi afterburner too and that can be a problem... its not the clearest on how to set it...

back in the day furmark was bad because it was like the prime 95 for gpus and it seems to just keep increasing the load. well people would run a test for hours and well ya not too good for it so it got a bad rep. was the problem fixed i dont no. but most just use heaven but any things would do. not to menchen sli setups that already had cooling problems...

if there dust and dirt on the floor it can be sucked in to the pc well on top it just suck w/e in the air. so long you keep the table clean... but a good case with eazy filters would work fine thow i dont keep track of filters on case these days but alot of them sould be fine.

use all of them...

w10 is outdated now and is soon to be un supported and things a can stop even before the do date. not saying thats the problem but just back up your stuff and format... backup have never worked for me so i just dont bother...

you can be shocked by a psu and the caps i no ive done it. how you drain the caps i dont no. but why would you need too... you should never be in your psu ever... oh i get it they want to see a borken psu so they can send you another one so you dont sell this one claming is "broken" just dont brake it too much so then you can fix it and the sell it i kid...

test each fan one by one. some times the fan frame on cheap fans is week and flexes when you screw it in so a blade could be hitting or there could be a baring thats no good.

i no i watch videos about this all the time its in law. there so many case they cant all be handled courtrooms are full. we need a juge dred... basically we are Fu+ed. in to the fire we go.

they will only do something if the theft is more then the cost of wages. walmart has like 2 people for like 20 Checkouts the amount of wages there saving is nuts. but its just the begining things will change. all we missing is deliveroy to be automated... its depressing to look up but its here evry job is being automated...

ya its been planed to be automated for a long time and the first place to do it. its sad but it is what it is. there will be no one and you will love it... here a video about what its like atm not everywhere but was going to be the stop gap between automation. md makes all the moeny well the store owner losses moeny its a monoplay. they coudnt give a fuc+ if they sell food or not. i seen an 8mill automated grocry store with 2 people... its just a mater of time and when not if. the problem is if people dont have jobs whos going to be shoping? do the rich eat at md no. Food Theory matpat has one were he talks about one store having all in one kinda like in this video but i cant find the video. the price will not go down because of robots just saying the price never drops like never... they might make the size smaller or "improve" the ingredients to cuts cost but no savings ever EVER gos to the consumer. evry time the minim wage gos up people have less moeny because everything els also gos up. they cut hours or just fire you... only the best will have a low pay job like in china. everyone has an A degree to work on an assembly line... dont like it your gone. most things in the store is made by robots all ready and the price keeps going up.

i have a biso with them when i buy my first rgb 2 fans out of 6 had bad barings...

ya i dont like msi or coolermaster. even thow msi alot of times has "cool" stuff at the lowest cost... as an aio loses water then tubes down would still be the best. the clogs was do to improper liquid additive and its a know problem in aios...

tubes up vs down was mostly for custom loops because you didn't want to trap the bubble in the rad and try and push it out to the res. in a good filled aio wont make a difference how ever some that are not filled right it would be best to have it tubes down and the rad hier then the cpu block so you could trap the air bubble in the rad and not thow the cpu block witch cause problems over time.

also herd of md not paying people...but i mean there robots around the corner.... one store i worked at had it to "try" the system and it wast time if some one comes in late you have to go spent time to change it on the system...

ssd m.2 were odd and amny diffreny setups. bkey and mkey being the most common. then theres the b+m key witch can do both. there m.2 witch was the first gen then nvme m.2 2280 is the most commom langth. they can have chips on one side or both depeing on the size. a m.2 will work with a pcie adapter that uses a sata cable and works with older os that dont work for m.2 like w7.

2014 quad sli 980 tis with 2x E5-2687W ASUS Z9PE-D8 v2) could do 4k and probly 1080p 160+ im guessing 2018 quad sli 1080 WS C621E SAGE 2x Xeon Platinum 8180? posably there a quadro thats faster? 2x Quadro RTX 8000 oh i guess there not good gaming pcs... well i guess depends on what you want to do...

im not saying dont buy used. even if it has problems you can get deals like a broken fan you can save moeny on it. if it didn't exploded then your good... my point was no prof that it was mind on or used hard all im saying. the gpu dose not keep track of its health as far as i no... maybe there a port that a manufacture can test it and get info on it i dont no if its dose then its a good crept secret. that about it hope the seller sells there stuff and gets a better pc.

and some one can clean, replace the cooling on it... so your saying you have to look up the same card used in the same benchmark on the same hardware with the same software and hops that that video was used on a stock factory card... and hope silacon Lotty dose not off set the results... ok bud you win have a cookie

thats what i though. some one can clean it, remove mining bios.

that seem like alot more work... but i dont see how that shows its been mind on or not... if you had a pic gpuz show what bios it has maybe. or if the seller has like 60 gpus that could be a red flag but as far as i no there no way to tell if something been used hard, mind on, new vs used, and how long its been used for... other then like hdd/ssd.

whats the difrance form completed and sold?

how can some one prove its not been mind on? all it is is trust. so any one can say anything really...

thing to note is not all sold lisings are right like say 4090 selling for $4000... alot of them were" sold" then payer not pay for it... but its a good way to get an idea thow ebay has alot of bs stuff on it...also a 4090 can sell for say $1 and shipping can cost $3999 i dont no if sold listing include the total cost...

ya like i said the used market is an odd ball. i think its do to resellers not need the sell it right this mini so they will sit on it at a hier price. there are other things to consider then just say gaming profromace for a part like lower power consumption can also incress the price. things like low profile too. as to sell it modded or not i dont no i guess you could have the buyer have an option to have it stock or modded.

what i do is look on ebay. for the parts. gets you an idea of what there worth. if you sell on local used site might not get as much as what ebay listings are for. selling all will be less then each part just depends on the offer and what your time is worth and how long you want to sit on it. but also if there faster parts for cheaper then that also changes things unless your parts are collectors. some platform parts are too hi imo but it is what it is. other tings that can help is a good describing, pics, pics of it working, recets if you have em ,box's