Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

thrasher_565

Member
  • Content Count

    613
  • Joined

  • Last visited

Everything posted by thrasher_565

  1. there are to mane connectors i don't no what the asus controller uses so as long as it matches i should work.
  2. attaching a probe to the + and _ of the sata or molex should tell you latest were thows pins are i would think.
  3. you have to have ports filled form 1 to 6 if you have 6 fans and say 1-5 with 5 fans not skipping say 2 or something. and all fans have to be the same. if you have done that that the hub could be faulty so could try and get one from corsair if not you have to buy a hub.
  4. hmm so that 35mm fan on the nb on the z170 mark 1 mb is super loud so im thinking on replacing it. also the back 40mm fan looks like i can fit a thicker fan in there so might looking in to that as well. i came across an some what rgb 40mm fan today but found it for cheaper but i need my viza card so need to go to the bank and get one. i do like the black thow but cost way more. ordered some pwm 4x splitter for the phantecs hubs will probably take a month or so to get it....
  5. it might be different on a laptop but for desk top gpus don't have a heat spreader so the heat sink attach to the cip. were as a cpu has a heat spreader and in between the chip and the heat spreader they some times cheap put on thermal past so replacing that helps alot. https://www.youtube.com/watch?v=r_BsEwSM0ys https://www.youtube.com/watch?v=zkHAYG-baqE
  6. hmm came across some cool cases no idea what to do in them yet but i wanted an thermatake Mozart case long time ago but never could afford it. and the xps 720 will have to do an atx mod now just need a free case to cut up....
  7. i don't no why the front fan cable has to go across just tune the fan so the wire at the back top...
  8. funny you can over clock it haha ya good powerful low profile cards are hard to come by and are more expensive. i think the 1050ti is the best low pro gpu i think. (oh looks like there a gtx 1650 low pro) and rx 460 or 560 would be good too. https://www.youtube.com/watch?v=ynxYGZgcXp8 https://www.wepc.com/reviews/best-low-profile-graphics-card/
  9. plenty of info but don't do the gpu there no point in it.
  10. i have a big case and so i can have up to 6 psu.... anyway one psu will power all my led stuff so turn that off and all the leds with it...i do like to sleep some times. as for an all in one rgb controllers there noting out there so its be diy i have thought of a control panel that had lots of switches that could controls fan speeds, show rpm, leds on and off even add a wat meter in there but im not the best at electronics so never did build it and that was before rgb stuff. i can dream. besides aqua computer aquaero controller can display rpm, wats, amps, uv meter, cpu temps, rgb controller and other stuff also has a remote and an desk lcd so theres that. it cost a tone of money thow.
  11. the problem is there are not many software controlled usb rgb controllers that use the stander 4pin connector. only ones i no of are lamptron and coolermaster. even if you uses ones on these controlelrs there softeare dose not offer much of rgb colors or effects so there that. now is there a way to attach standerd 4pin rgb to non standerd yes there is but its can be costly and even more confusing. if you want a cheap slotion would be to get an manual controller with a remote. other option is to replace the fans with say corsair or thermtake
  12. Corsair Spec Delta case looks like it has non corsair eco system fans that sync to any mb with rgb head. https://images-na.ssl-images-amazon.com/images/I/716qCkTIH8L._SL1500_.jpg
  13. dont no about pulsing 1 color for each fan could do it or could not i think there's a fill 1 fan then another fan.. so non rgb software are coolermaster, lamptron, aquacomputer, but argb can do rgb stuff to so there's that.
  14. depends on what your looking for. are you looking for argb or rgb. what software do you want to use. all you have to do is put the name in ammazon and add rgb to it like thermatake rgb. asus rgb coolermaster rgb aquacomputer rgb lamptron rgb nzxt rgb thermaltake and corsair both have rgb fans and argb fans and many sizes. corsair rgb fans are not software controlled thow only there argb stuff is.
  15. haha was not the response i was looking for good sir. looks good man i do love orange.
  16. thermaltake, corsair, nzxt, coolermater, asus, lamptron, aquacomputer, and ek might get in to it. coolermaster is crap thow so don't recommend it.
  17. rgb gpu back plate, rgb fittings, rgb ssd/.hhd, rgb psu, rgb under glow, rgb hdmi cable, rgb psu cable, rgb power switches, rgb around the mb. rgb gpu braket rgb io shield i seen rgb usb cables...and i just found an rgb pwm fan hub..... back in the day you could buy an led feet that take 1 5mm led you could add an rgb i that but i dont think they sell em any more. but you could 3d print feet. if you can rgb and psu cover then feet should be np....
  18. i dont see the point but w/e i do crazy stuff to so ill give you that. i guess if the gpu is all ready using a rizer cable then all you need is a mount for the gpu. there a few cheap ones depending on how you want to mount it. as for the mb tray the hard part is making a hole for the io shield. you can mount it on stand offs. then you need something to fill in your old hols. as for the psu i think it has its own mount i think so just have to cut a new hole and mount that. https://www.mountainmods.com/product_info.php?products_id=754 https://www.amazon.ca/watersouprty-Graphics-Vertical-Internal-Accessories/dp/B07YC9B6C4/ref=sr_1_30?keywords=vertical+gpu+mount&qid=1581130580&sr=8-30 https://www.amazon.ca/watersouprty-Vertical-Accessory-MasterBox-MasterCase/dp/B07YSGBCNJ/ref=sr_1_56?keywords=vertical+gpu+mount&qid=1581130630&sr=8-56 https://www.amazon.ca/Kaislin-Vertical-Graphics-Bracket-Support/dp/B07VPGJ79V/ref=sr_1_1_sspa?keywords=vertical%2Bgpu%2Bmount&qid=1581130708&sr=8-1-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExWTBRMUdSSzg4MzFTJmVuY3J5cHRlZElkPUEwNjMzMDI2M0RJMjkyM0k1VTk3SCZlbmNyeXB0ZWRBZElkPUEwNDg4MzAzSTE2QUlJVFI1OFpJJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1 https://www.mnpctech.com/products/mnpctech-stage-1-vertical-video-card-gpu-mounting-bracket?variant=31357593387074 https://www.mnpctech.com/products/mnpctech-stage-2-vertical-video-card-gpu-mounting-bracket?variant=31357715775554 https://www.mnpctech.com/products/mnpctech-small-vertical-video-card-gpu-mounting-bracket-black-requires-cutting-mounting-hole
  19. sounds like a big mod for your first mod imo....but w/e. are you looking to modify a case or build a case from scratch?
  20. well im been taking for ever working on my thermaltake core 200wpp.....so ill put my pc in a thermaltake core x9 air case instead! ya i no a bit of a down grade....deal with it. i macgyvered 2x phantech pwm hubs on a corsair commander.... it just has to work i don't have double sided tape. ya i no the front dose need a 200mm fan...
  21. fan screws are normal different. they got big threads on them. psu screws are the mid sizs screws and hhd/ssd/mb screws are the small screws but some mb and hhd uses the mid size screws.
  22. i made a thread on this and most said don't do it! i guess at the end of the day its your money and do what you want. the people said don't do it but never showed any evidence to not do it. it would be a good idea of have a post were people who have did mixed metal builds and the pros and cons of it. most build that i do see do this are all cheap builds dells and hps with a $100 loop were if something gos wrong w/e i like to see a hi end system running mix metal loop. i think the man problem is were do i buy a mixed metal coolant cheap. you can get car coolant cheap! i have got a fairly cheap custom loop $25ish a rad, $40-100ish for pump, $2 a fitting, $15-40 cpu block, ($100-200ish you can build a hybrid gpu block for $15-20) gpu block and res optional. i thought of going all aluminum but your stuck with ek fittings, pumps, and w/e gpu block they have. and ya there are cheap cpu blocks but there cheap..... all just to save money on rads. doable but be a pain. you can use plastic fittings if you can find em or most rad,block have small fittings on them witch would limit you anyway. ya you could go nuts with rads for cheap but then if its too big the you have to buy another pump witch ek stuff not cheap. if you have an io and want to add another rad to that then i can make seance.
×