Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

bradmonster

Member
  • Content Count

    164
  • Joined

  • Last visited

Awards


This user doesn't have any awards

1 Follower

About bradmonster

  • Title
    Member
  • Birthday 1996-01-01

Profile Information

  • Gender
    Male
  • Location
    Valhalla

System

  • CPU
    Intel® Core™ i7 8700K
  • Motherboard
    ASUS Motherboard Z390-A Prime
  • RAM
    G SKILL Trident 32GB 2133Mhz
  • GPU
    Gigabyte 1060 6Gb OC
  • Case
    NZXT H440
  • Storage
    2x 512GB OCZ ssds, 2x 3Tb Seagate
  • PSU
    Corsair 650w
  • Display(s)
    2 x 1080 75Hz LG
  • Cooling
    Deep Cool AIO RGB cooler
  • Keyboard
    Durgod Taurus K320 TKL Mechanical Gaming Keyboard
  • Mouse
    G-Wolves Hati HT-M 3360 Ultra Lightweight Honeycomb Shell Wired Gaming Mouse up to 12000 cpi
  • Sound
    Logitech 7.1 Theatre setup
  • Operating System
    Windows 10 / VoidOS (linux)

Recent Profile Visitors

981 profile views
  1. Try this may or may not work in your scenario 1) create or open this conf file: sudo nano /etc/modprobe.d/zz-nvidia-modeset.conf 2) add the following line: options nvidia_drm modeset=1 3) update your initramfs sudo update-initramfs -u 4) reboot Side note: are you using proprietary driver from under the additional drivers under settings?
  2. If I understood your question correctly this article has guide to disable and re enable. But as the poster above stated tape works well too.
  3. They are practically the same with some underlying feature changes but the main change you will see is the GUI interface. Some interface and GUI's are lighter / heavier (more animations and textures some carry less) this comes in handy when running on older systems or laptops.
  4. Could be a bios based issue, have your tried checking the core voltages etc in the bios? and if your board on cool-n-quiet mode?
  5. There should be a settings under WI-Fi > Modify network, advanced> manual you can add proxy settings I believe?
  6. If I am not wrong the 2016-2017 Mac Books have this issue due to the T2 chip. There is a work around you can use found here. This may help in your case but I have not tested personally.
  7. I mean it was working before right and just swapping the OS should not have cause it to fail to boot etc.
  8. Hmmm that's pretty strange, earlier when you were checking the hard drives did you open the laptop? If so maybe try making sure the drives are properly connected same for the ram if it is seated correctly? At this point for me I can only recommend trying to install Ubuntu and see if it runs stable?
  9. Have you tried installing win10? I'm just asking to see if its operating system based issue or even a linux based OS?
  10. Might need to checksum your windows 7 ISO file to make sure its file integrity is ok. The ISO file could be damaged or missing some data. If that checks out and the checksum comes back with no errors try using a different media creation tool. Example Etcher or Yumi USB tool's.
  11. If your running Solus does Unetbootin work for you?
  12. Could be the format of the drive, or etcher I have had issues with in the past. Have you tried another USB / another flashing software? I would recommend Rufus or YUMI.
  13. Have you tried using a different USB with a fresh macOS installer? Could be the current install media. (Worth a try had it happen before)
  14. In your firewall settings page try enabling "sshd-keygen-wrapper"
×