Mummy84

I did just come home from work and still that site is timeing me out ("ERR_CONNECTION_TIMED_OUT"). Atleast Folding own site still works for me https://stats.foldingathome.org/donor/107197

https://folding.extremeoverclocking.com/ is down Or just at my end?

My last WU did take it's time to upload it in and that means you lose credits for the time uploading. So the problem can be on there end... Here https://folding.extremeoverclocking.com/ you can look users scores by hour.

EDIT: What i mean is NP

"badges supersede each other meaning when you hit 1 million points, your Contributor Badge becomes a Bronze Badge, you only get one and they do not stack on your profile." Am i wrong if i say, this forum had(has) a Mod with Slogan "I HATE BADGES!!!" ? ..Just saying at least you have something to do these weeks

Have you overclocked your GPU? ... if so thats most likely it even if its staible on your other test Foulding can be picky on it...

No yo don't have to have monitor pluged in to that secend card and if i member right your system can be run totally headless.

"WARNING:WU00:FS00:Failed to get assignment from, No WUs available for this configuration" well clad you can be picky these days

Thanks for the info! I was Wondering this too! ..as i havent foulded never on w10 or with this GTX1080 before...

Is that MB still on Warrenty? And did you get your MB out of that case? ... Sounds like your MB Is shorting out to the case. As MB bends it eather can start or cant...

Ok. Sorry dont remeber is your MB out of the case ? ...if its not. Then try it out of the case examble on the box that MB did come to you. Will it not be enable to turn on that PSU?

To me those would cost (if ordered from there) 141,61€. So that wouldnt be good for me but if you can get them for 105€ personally i would get them. If i dont member wrong even LTT says on video that AMD has 3600 max but you can get 3800 too working with 1:1 so.. For 1440 i would get 5700

same brand? ...What are the kits product numbers? here 2x8gb 3000 cl16 = 92,9€, 2x8gb 3200 cl16 = 93€, 2x8gb 3600 cl18 = 99€ So nice prices you have there. I did go with 3600 but then again i did get main when it was 93€(now its 114€). 3000 to 3200 isnt so big of jump but maybe like jstudrawa sayd you can get 3600? Timings isnt so big of a deal...

and if you get the point where you can power on your PSU but your MB cant do it. Then try it without that GPU. It shouldent matter but world is full of wonders. Then i would try it on that lover PCI-e slot and see what happends...

My F-secure didnt like that Thaiphoon site at all or the prog. But every one that i have found that looks what chip there realy is uses it so dont know whats the prblem... Anyway main ram has Hynix "c-die" if you belive that prog and if google it and belive what reddit says then it's = Hynix CJR. And results are Cl16 allso so my 3600 CL19 could come down with added voltages a little bit. on my setup Fast calculation isnt supported for some reason. So my point maybe it is close to Cl16. And remember as AMD Gear Down Mode on this high Freq your CL cant be odd number if you dont disable it.

HI, Are you sure your memory has Samsung B-die in it? Did you change the voltages like the calculater shows you? as your kit is 3200MHz CL16 i would think you need to losen timings to get 3600MHz out of it stabel so i would think some thing like 20-20-20-40. but then again this is new to me too and i havent tryed yet that tool but i have sean guide for it on YT and on it it looked simple...

(quote)It didn't at first, but now it is successfully turning on multiple times in a row, and giving vga error code because I have the gpu out (as well as the SSD) when this happened before and I stuck the gpu in it wouldnt turn on again, advice on what to do next?(/quote) I would put all back together and if the error comes back then i would be damn sure i shorth correct front panel pins. And if that dosent help i would check dose the PSU turn on when jump started

My PSU Dose have Zero RPM mode and even it turns on, on start up (for self check i q). So if your PSU dosent run it fans or powerleads dosent power on sata/molex leads and you are sure you shorted correct mb power switch pins then. Take out your ATX 24 pin and jump start your PSU with paper clip (green to Black) to see is it your MB or PSU that is fault here. If your PSU has all Black wires then be sure to shorth correct ones!!!!

ahh ok. dos your PSU fan turn on when you power on the PC?

Sorry, So do you see those leds turn on or not? and if they do turn on, dose one stay on or will they all turn off?

Do you have ligths on MB at lover rigth corner? There should be 4 red leds for "Post Status Checker" (PSC). Those should run from top to bottom and stop on the part that its currently working on. 1.CPU, 2. DRAM, 3.VGA, 4. BOOT/Storage.

Yes it only effects on tCL On my ASRock MB. "Gear Down Mode" is under the same menu "DRAM Timing Configuration". PS. if you disable GDM and test it and after that set it back to "Auto" and save it. Then it seem like it wil auto tune it with GDM disabled in maind. at least main did and after very very very long boot it passed and what i did see was that my timings was 19-20-20-40 but CR was 2 and not 1 like before. My point is if you have long boot after this change. Then dont run to take power off psu, as atleast main didn respond 1 power button push shutdown and it was doing testing even thoug it didn seam like it did anything. Anyway Thanks for good info Porina! Have a good day all!

Ahh ok. So next down should be then CL16 and as my memory SPD is 2133MHz it did exept CL15 as it was at "low speed"? Is this odd number rule to all timeings or only CL?

yep but its on stock clooler at the moment and running 100% cpu load brings it down to ~4GHz and 1,28v

Hi, I have run my PC now fine over the weekend and now i desided to enable X.M.P. profile in my BIOS. System boots fine without errors on overclocking issues etc.. and runs fine. exept all progs. allso BIOS says that XMP on my RAM is 19-20-20-40, but BIOS sets it to 20-20-20-40 If you then manualy go to set timing 19 is allready selected on CL but F10 results CL20 again. What makes this intresting to me? Well if i set timeings to 18-20-20-40 it realy sets it to it and boots fine ada64 rusn fine... So my Q is. Is it normal that BIOS cant set (or that memory cant stay) on some middle CL timeings like in this case? So rebeat: 20-20-20-40 is ok 19-20-20-40 isn't ok 18-20-20-40 is ok System specs. AMD Ryzen3700x (stock) ASRock X570M Pro4 G.Skill Sinper x 3600MHz DDR4. F4-3600C19D-16GSXWB Corsair RM650x EVGA GTX1080 Sorry yeah user error at least on the posting place Sorry Can users move own topics or dos it have to be moved by mod?