Jump to content

Weirdybeardyman

Member
 View Profile  See their activity

  • Posts

    229

  • Joined

  • Last visited

 Content Type 

Everything posted by Weirdybeardyman

  1. Weirdybeardyman
    I submitted my model not too far into the contest and they have since uploaded the images of my model printed out but the listing still says 'Under review' despite having been printed and photographed.
  2. Weirdybeardyman
    Beautiful, my favourite design so far.
  3. Weirdybeardyman
    I'm sure it will be at least a few weeks to months with the amount of models they will have to be printing concurrently.
  4. Weirdybeardyman
    Nice, like it alot, its crazy the different takes people have designing the same product.
  5. Weirdybeardyman
    Beta with snubnose2

    From the album: Headphone Stands

  6. Weirdybeardyman

    Headphone Stands

    Images added to a gallery album owned by Weirdybeardyman in Members Albums Category

  7. Weirdybeardyman
    This is my entry so far. Bascially
  8. Weirdybeardyman
    Looks very nice and just a better version of mine :'(
  9. Weirdybeardyman
    I'm a bit of a noob at 3d modelling and I've never done CAD before or designed a model to be 3d printed but im making an entry cause it seems like something that would look good on my portfolio.
  10. Weirdybeardyman
    That looks beautiful. Love it, though the design does look a bit busy. You have some serious 3d design skills.
  11. Weirdybeardyman
    I like the design, but if you want some feedback it looks a bit floppy, a bit contrasting to silverstones other more angular products. Mabey have a 45 degree join instead of a curve. Or match the angle of the joining section to the angle on the front of the arm.
  12. Weirdybeardyman
    Do you have complete up to date drivers. Are all you system temps ok. Have you checked CPUID and GPU-Z to validate all your RAM is being registered and is functional? If not do these things.
  13. Weirdybeardyman
    Will the airflow be ok if the psu fan is directly above the cooler and they are blowing in opposing directions?
  14. Weirdybeardyman
    Ok, thanks for the advice, hopefully it won't be too much of a bitch and the fan will come out without me having to remove any hardware and the rubber mounting gromets for the fan don't mind being reused.
  15. Weirdybeardyman
    I have a corsair cx something positioned intaking air from outside the case through the grilles on the top of the case.
  16. Weirdybeardyman
    sorry, I misunderstood you, so you would suggest an exhaust fan at the front over an intake?
  17. Weirdybeardyman
    This computer is for media light gaming for my dad so an aio seemed unjustified and the budget was tight.
  18. Weirdybeardyman
    The way the card is positioned it is unlikely to effect the CPU area of the case tempwise and the temps are ~55 from boot.
  19. Weirdybeardyman
    there is nowhere to mount an exhaust fan, only an intake at the front.
  20. Weirdybeardyman
    Dual channel will not have noticable performance effects but it sound like you might have a faulty ram stick mabey? How many Tabs do you usually have open, are you getting these freeze in game only when chrome is open, how much graphical ram do you have?
  21. Weirdybeardyman
    The case only supports a single intake fan in the front, also the cable managment is pretty bad and probably is affecting airflow pretty heavily but the psu is semi modular so there is the bare minimum of cables.
  22. Weirdybeardyman
  23. Weirdybeardyman
    The cooler is tiny, and I know the temps are safe but it still seems a bit hot.
  24. Weirdybeardyman
    No, they are on idle.
  25. Weirdybeardyman
    I have never had or built a small form factor pc before today but after many hours of building and cable management the computer is complete. The computer is in the Silverstone sugo sg13 with a Intel Pentium K Aniversary, being cooled by a front 140mm noctua a14 and a noctua nf-l9i. As I am unused to building small form factor cases I was a little suprised that CPU temps were around 55-60 with a stock fan curve. I am not sure if this is normal because of the poor airflow through the mess of cables or I have some kind of thermal problem due to mounting ECT. I would greatly appreciate any clarification or input.
×