Jump to content

MichaelPan2002

Member
  • Posts

    12
  • Joined

  • Last visited

Awards

This user doesn't have any awards

About MichaelPan2002

  • Birthday Jan 01, 2002

Profile Information

  • Gender
    Male
  • Occupation
    Student

System

  • CPU
    i5 4690K
  • Motherboard
    Asus Z97-A
  • RAM
    Kingston HyperX Fury 8GB
  • GPU
    XFX Radeon R9 270
  • Case
    Corsair 200R
  • Storage
    WD Blue 1TB
  • PSU
    Corsair CX600
  • Cooling
    Cooler Master Hyper 212X
  • Operating System
    Windows 8.1

MichaelPan2002's Achievements

  1. nvr mind guys it powered up for some reason :P
  2. Hi guys, I built my pc around a year ago, there were a few problems at first but they were solved and my machine worked. Now, i changed the location of the pc, and plugged it in. Unfortunately it did not POST. Windows 10 was installed, and everything worked previously. When it turns on, the led at DRAM, TPU and CPU lights up for a few seconds and then it turns off. All the fans work, but it does not POST. the monitors were used previously and they both turned on but they did not display anything. My specs are: CPU: i5 4690k GPU: XFX R9 270 power supply: corsair cx 600 mobo: z97-A much help would be appreciated, thanks
  3. it is both turned on and plugged in. i dont think it is monitor problem. i tried it with tv and another monitor and did not work.
  4. i disconnected everything and connected it back. didnt work. i pushed everything back down too. on mobo i connected 24 pin and 8-pin. on gpu i connected 6-pin. it's all that's needed for mobo and gpu right?
  5. I did both. it didnt work the mobo doesnt make beeps either. i will try to get pictures.
  6. In my case, the standoffs were preinstalled. my monitor was connected to the GPU output. as i have typed, i tried it with my tv and old monitor too. doenst work.
  7. I used HDMI and DVI. Both doesn't work. I also used the mobo's output. Didn't work
  8. I plugged in every power cable that is needed. Including the GPU 6-pin PCI-E one. the fans spin for a while, then stop. then start, spin for awhile, then stop. my monitor is set to hdmi.
  9. I just built a new PC. I connected all the wires and stuff. I pressed power, but the monitor remained blank. The fans inside are all spinning, but the monitor continues to remain blank. I tried it again with the motherboard video outputs instead but same problem. I don't think monitor is problem, because i tried it with my TV and this old VGA monitor. Please help! My system specs: Case: Corsair Carbide 200R Mobo: Asus Z97-A CPU: Intel Core i5 4690K RAM: Kingston HyperX Fury 8gb(2x4gb) Power supply: Corsair CX600 80+ Bronze GPU: XFX DD Radeon R9 270 HDD: WD Blue 1TB PLEASE HELP!
  10. I found LTT and techquickie at the same time. I found that anti static video of techquickie, and saw videos from LTT at the side. At first I read Linus as Linux, so I did not go there. Finally, I visited LTT and said to myself, isn't that the same guy from techquickie? From then on, I subscribed.you guys do awesome vids! Good luck! I will still be subscribed when you guys reach 1 billion subs . Btw, I think that maybe you should do build guides with lower budgets. Thanks for the great vids!!
×